Sonoma County, California - Chapter 21, 1889
From An Illustrated History of Sonoma County, California. Containing a History of the County of Sonoma from the Earliest Period of Its Occupancy to the Present Time, published 1889. 4,157 words, reproduced complete and unedited. Source changes inside the text are labelled in place.
The text
4,157 wordsMachine-read from scans of An Illustrated History of Sonoma County, California. Containing a History of the County of Sonoma from the Earliest Period of Its Occupancy to the Present Time, published 1889. Nothing has been corrected: fixing what looks like a misspelled name is how an invented one gets published. Source changes are marked where they occur.
IXTENDTNG from Mendocino southward long the coast line of the county, to a distance averaging about ten miles inland, is a magniticent redwood belt of timber. There are considerable quantities along Russian River and tlieGualalaand at intermediate points, possibly' one thousand millions of feet of lumber if all the lumber is accessible.
The soil, generally throughoit this region is very fertile. The valley's are mainly sandy loam, the deposits of ages. The hillsides, usually a dark loose mold of vegetable matter, sometimes with gravel, and clay and rocks. It would seem as if the earth that produces this enormous growth ought to raise almost any kind of vegetation, and so far as tried, it does. There is no better land in the State for general farming purposes. Fruit, grapes, alfalfa, corn, vines, etc., grow to perfection. The land too is cheap as compared with other more vaunted localities. But it is rough and laborious work to put these raw clearings, left by the loggers, in shape for the plow. Rears, apj)les, peaches, figs, grapes and especially French prunes flourish in perfection, and produce with unbroken regularity. It is a section of the State little heard from heretofore and destined to become better known.
To give the reader some idea of the resources of tiie redwoods - what is left of them - it may be stated that Occidental, Duncan's Mills and Guerneville are villages which are sustained mostly by saw-mills and lumber industries. The daily average .shipments from Guerneville are about eighteen carloads, of which ten are lumber furnished by the Rig Bottom saw-mill. The annual output of lumber, ties, posts, pickets, shingles, cordwood, bark and piles is about half a million dollars from these little stations on Russian River. Near the mouth of the Gualala River there is a fine mill, owning an immense tract of 15,000 acres of timber, and making extensive shipments.
NotwithstaTiding the great value of this timl>er for exj)ort, its chief value is its proximity to the Santa Rosa and Petaluma valleys, which extend from fifty to sixty miles northward from the Bay of San Francisco. Throughout that entire country all the fencing and building lias been furnished by thcs.' redwoods. The first settlers went there and camped while they made rails, shingles and ])ickets on Uncle Sam's domain. It was common property. When the first saw-mill was built by Powers on the river, and after he had taken up the land, he was powerless to keep the farmers of the valley from liedwodds are far taller than the xequoia (jujantea of Calaveras, whicli do not attain a greater heiglit than about 250 feet. J. umber men have cut timber here,- and can still show it in Big Bottom, over 350 feet high. The diameter is less, ranging from saplings to 18 feet across the stump. Fifty acres of this heavy timber lias been set apart for a public park by Colonel Armstrong, with an extension of the Donahue Itailroad leading to it, and completed but for a link in the line crossing lands owned by parties who will neither lease nor sell, near the village of Guerneville. The road will doubtless be finished after resorting to the courts, when future generations can have free access to the picnic ground. It will be the last remnant of a mighty forest before ten years, and the nearest one accessible (seventy miles distant by rail) to the city of San Francisco.
The Petaluma ^[/yus of October, 1S82, says: " Some months ago mention was maile in the Aiyii.'^ of the felling of a mammoth redwood tree on the land of John Torrence, near Guerneville, in this county. The following additional particulars concerning this giant of the forest is furnished us by Wm. L. Van Doren, of this city: The standing heiglit of the tree was 34:7 feet, and its diameter, near the ground, was 14 feet. In falling the top was broken off 200 feet distant from the stump, and up to the point of breaking the tree was perfectly sound. From the tree saw-logs were cut of the following lengths and diameters: 1st, 14 feet long, 9 feet diameter; 2d, 12 feet long, 8 feet diameter; 3d, 12 feet long, 7 feet 7 inches diameter; 4tli, 14 feet long, 7 feet G inches diameter; 5tli, 10 feet long, 6 feet 10 inches diameter; 7tli, 10 feet long, 6 feet 6 inches diameter; 8tli, 10 feet long, 0 feet 4 inches diameter; 9tli, 10 feet long, 0 feet 3 inches diameter; 10th, 18 feet long, 0 feet diameter; 11th, 12 feet long, 5 feet 10 inches diameter; 12tli, 18 feet long, 5 feet 6 inches diameter. It will thus be seen that 180 feet of this remarkable tree was converted into saw-logs. As the length and diameter of each log is given, the reader can. at leisure, figure out the quantity of inch lumber the tree contained. If, instead of being cut into lumber, it had been worked up into seven foot pickets it would have afforded fencing material to enclose a good sized ranch."
A correspondent of the Healdsburg Fla<j, who some years ago visited the saw-mill of Guerne it Heald in the l^ig Bottom redwood forest on Russian liiver, thus describes what he saw :
"The mill has been running in its present location about one year. It is a very substantial and well arranged structure, the workmanship of ilessrs. Bagley and Goddart of this town. It has a new 48-horse power engine, 14 cylinders and 18 inch stroke, and runs a double circle saw - the lower one 02 and the upper one 70 inches - edger and planer. The capacity of the mill is 20,000 feet per day. The mill is twenty miles from Healdsburg by the road - about twenty-five miles by the course of the river. J. W. Bagley is head sawyer. We remained but one niglit at the mill, and the next morning penetrated into the foi-est for the pur])ose of seeing one of the resources of Sonoma County - her redwoods. Three and a half miles from the mills we found - Outch John " making shingles. This stalwart specimen of Teutonic muscle eats, sleeps, cooks, lives and battles with the giants of the forests alone. Sometimes he does not see a human form or hear a human voice, but his own, for weeks at a time. He has felled trees. Two of them are nearly worked up, and he has now on hand, made from them, over 200,000 shingles. He informed us that on his place trees that would make 180,000 shingles are common. Some will go to 200,000. I applied the tapeline to one tree that measured 07 feet in circumference two feet above the ground. This monster of the forest measures nearly 200 feet in height to the first limb, at which point it is about ten or twelve feet through. Mr. Bagley made a calculation upon this huge trunk, from wliicli lio says it would cut 180,000 feet of luiulicr, make pickets to fence a ten acre lot and fifty cord of wood. The Plaza church in IlealdBljurg is 80x40 feet, and has a steeple 20 feet higli; it contains aI)out 30,000 feet of lumber. This tree, then, would cut luinf)er enough to make six such buildings.
" Near Ileald's mill is a very large tree, kuowji as 'The Htable,' which is hollow at the ground, inside of which a man can stand upright and walk fifteen feet. It measures inside twenty seven feet across, and is capaljle of staliliiig twelve horses, with a haymow to supply them for one winter.
" Not far from this is the ' Bean Pole.' This is a large tree, but it is somewhat tall. A measurement taken by professional mechanics gives this sprout a height of 844 feet. This is one of the finest bodies of timber on the coast, and is of a superior quality.
" Mr. J. G. Dow has taken a section of the bark from around one of these trees - thirteen feet in diameter - in pieces three feet long and one foot wide, which may be set up .like the staves of a tub, showing the size of the tree. This bark is from live to ten inches thick, lie also had a piece of bark six feet long and about two feet wide, which is twenty inches thick, lie designs taking these barks East for exhibition. They will be on exhibition at the Mechanics' Pavilion in San Francisco during the fair this fall. He will perhaps give the people of llealdsburg, who may wish it, an opportunity of seeing this wonderful.growth before removing it to the city. He has had the tree photographed and will have for sale the pictures, in sizes to suit the wishes of all.
" We visited the Steamer Jititei'prise, lying one mile below the mill. Captain King is quite confident that he will visit llealdsburg by steamer before Christmas. Says he intends next summer to make regular trips three times a week to llealdsburg. Next Saturday he intends making his first trip to the mouth of the river."
In speaking of these redwood forests, J. P. Munro-Frascr a few years ago penned the following in reference tn the lumbiTing business in Ocean Township:
"There are several very large saw-mills in this townshij), in fact, there is more mill capacity in it than in any other in the county at the present time, aggregating about 150,000 feet daily. The Duncan's Mill Land ami J^umbcr Association's mill will cut 30,000 feet a day. The mills owned by the llussian River J^and and Lumber Association at Moscow, Tyrone, Russian River Station, and at other points in the Howard Canon, will eacli cut 30,000 feet daily; none of the mills belonging to the lastnamed association are running at the present time, but the mill of the first named is in operation. To give a history of Duncan's mill, we must needs go back to the pioneer days both of California and of saw-milling. In 1840 a number of carpenters, employed in the erection of the barracks at Beuicia, conceived the idea of forming into a company and starting a saw-mill. Lumber at that time was worth $;300 per 1,000 feet, and of course at that rate the business would pay far better profits than even mining. The company was organized under the name of the Blumedale Saw-mill and Lumber Company, in honor of F. G. Blume, of whom they leased the timber land. It was located on Ebabias Creek, in Analy Township, a few miles east of the present site of Freestone. Clias. McDermot was president, and John Bailiff, secretary of the company. They formed the company and rented the land in 1848, but it was not until November of 1840 that the mill was got into operation, but by this time the price of lumber had so materially decreased, and the expense of getting it to market was so great, that but little lumber was ever cut by this company. In 1850 General George Stoiieman (then lieutenant), Joshuallendy, and Samuel Al. Duncan purchased the property of the Blumedale Mill and Lumber Company, and continued to run it at that place until the spring of 1852. In the meantime, however, either late in 1851 or early in 1852, Stoneman disposed of his interest to his partners, and they continued in business under the firm name of Ilendy A: Duncan.
their mill to a mining camp known as Yankee Jim's. Here they remained a year, and in 1858 tlie macliineiy was moved to Michigan Blutt's, another mining town. In 1854 they brought the machinery back to Sonoma County, locating at Salt Point, and establishing the first steam saw-mill in Sonoma County, north of Russian [liver. Up to this time the capacity of the mill had only l)een 5,000 feet per day, but the new boilers were procured, making it a sixteen-horse power engine, and increasing the capacity to 12,000 feet a day. In 1855 Joshua Ilendy disposed of his interest to Alex. Duncan, and under the firm name of Duncan IJrothers, the business was conducted very successfully at this point until 1860, when the mill was moved to the old mill site near the mouth of Kus?ian River.
While at Salt I'oint they sawed 30,000,000 feet of lumber, being an average of 5,000,000 per year. At the time the mill was moved to Russian Ri\er, its machinery was greatly enlarged and improved, and its capacity increased to 25,000 per diem. While tiie mill was located at this place, tliey cut about 100.000,000 feet of lumber. No one has any conception of what those figures mean, or how much luml)er it is; yet even that great number would iiave been greatly increased, had it not been that almost every year large quaTi titles of logs were carried out to sea during the freshets. The winter of 1862 was the worst, carrying away probaljly 7,000,000 feet of lumber in the logs. It seemed almost impossible to construct booms strong enough to withstand the mighty force of the raging floods of water. In 1877 the Duncan's Mill Land and Lumber Association was formed, and the mill moved to its present location. At that time it was enlarged to a capacity of 35,- 000 feet per day. whicli is about the greatest capacity of any mill in this section. The macliinery in the mill consists of one pair of doulde circular saws, each sixty inches in diameter; one pony saw, forty inches in diameter; one muley saw, capable of cutting a log eight feet in diameter; two planing machines, one picket lieader, one shingle machine, together with edgers, jointers, trimmers, and all the necessary machinery and appliances for conducting the business of sawing and working up lumber ex]>editioiisly.
We will now give a detailed description of the modux operandi of converting monster redwood trees into lumber, as we saw it done at this mill. We will begin with the tree as it stands on the mountain side. The woodsman chooses his tree, then proceeds to build a scaffold u]) Ijeside it tliat will elevate him to such a height as he may decide upon cutting the stump. Many of the trees have been burned about tlie roots, or have grown ill-shaped near the ground, so that it is often necessary to build the scaffold from ten to twenty feet liigh. This .scaffold, by the way, is an ingenious contrivance. Notches are cut at intervals around the tree at the proper height, deep enough for the end of a cross-piece to rest in securely. One end of the cross-piece is then inserted in the notch, and the other is made fast to an upright post, out some distance from the tree. Loose boards are then laid upon these cross-pieces, and the scaffold is completed. The work of felling the tree then begins. If the tree is above four feet in diameter an ax is used with an extra long helve, when one man works alone, but the usual method is for two men to work together, one chopping "right-handed" and the other "left-handed." When the tree is once down it is carefully trimmed up as far as it will do for saw-logs. A cross-cut saw is now brought into re(juisition, which one man plies with case in the largest of logs, and the tree is cut into the reijuired lengths. The logs are then stripped of their bark, which process is accomplished sometimes by burning it off. Then the ox-team puts in an apj)earance. These teams usually consist of three or more yoke of oxen. The chain is divided into two parts near the end, and on the end of each part there is a nearly right-angled hook. One of these liooks is driven into either side of the log, near the end next the team, and then, witli many a surge, a gee, and a liaw. and an occasional (^) uatli, the log is drawn out tu the main trail to the landing-place. If on the road there should he any up hill, or otherwise rough ground, the trail is frequently wet, so that the logs may slip along more easily. Once at the landing-place, the hooks at the end of the ciiain are withdrawn, and the oxen move slowly hack into the woods for another log. The train has just come up, and our log, a great eight-foot fellow, is carefully loaded on one of the cars. As we go along the track on this novel train on our road to the mill let us examine it a little. Beginning at the foundation, we wilj look at the track first. We find that the road bed has been well graded, cuts made where necessary', fills made when practicable, and trestle work constructed where needed. On the ground are laid heavy cross-ties, and on them a six by six square timber. On this an iron bar, about half an inch thick and two and a half inches wide, is spiked the entire length of the track. The two rails are five feet and live inches apart, and the entire length of the tramway is five miles. Mow we come to the cars which run on this (pieerly-constructed track. They are made nearly scjuare, but so arranged that by fastening them together with ropes a combination car of almost any length can be formed. And lastly, but by no means the least, we come to the peculiarly-contrived j)iece of machinery which they call a "dummy," which is the motor power on this railroad. This engine, boiler, tender and all, stands on four wheels, each about two and a half feet in diameter. They are connected together on each side by a shaft. On the axle of the front pair of wheels is placed a large cog-wheel. Into this a very small cogwheel works, which is on a shaft, to which the power of the engine is applied. There is an engineer on either side of the boiler, and they have a reverse lever, so that the dummy can go one way as well as another. By the cog-wheel combination great power is gained, but not so much can be said for its speed, though a maximum of five miles an hour can be obtained. On our way to the mill we passed through a little village of shanties and cottages, which jiroved to be the residences of the choppers and men engaged in the woods. Farther on we pass through a barren, deserted section, whence the trees have all been cut years ago, and naught but their blackened stumps stand now, grim vestiges of the pristine glory of the forest primeval. Now we pass around a grade, high, overhanging the river, and, with a grand sweep, enter the limits of the mill-yard. (Jur great log is rolled off the car on to the platform, and in his turn passes to the small car used for drawing logs up into the mill. A long rope attached to a drum in the mill is fastened to the car, and slowly, but surely, it travels up to the platform near the saw. Our log is too large to go at once to the double circular, hence the "muley,'' a long saw, similar to a cross-cut saw. oidy it is a rip saw, and stands perpendicular, must rip it in two in the middle to get it into such a size that the double circular can reach through it. This is rather a slow process, and as we have nearly thirty minutes on our hands while waiting for our log to pass through this saw, let us i)ay a visit to the shingle machine. This we find on a lower floor. The timlter out of which shingles are made is cut into triangular or wedgeshaped pieces, about four feet long, and about sixteen inches in diameter. These are called "bolts.'" The first process is to saw them off into proper lengths. These blocks are then fastened into a rack, which passes by a saw, and as the rack passes back a ratchet is brought into requisition, which moves the bottom of the block in toward the saw, just the thickness of the thick end of the shingle and the top end to correspond with the thickness of the thin end. The l)lock is then shoved past the saw, and a shingle is made, except that the edges are of course, rough, and the two ends probably not at all of the same width. To remedy all this, the edge of the shingle is subjected to a trimmer, when it becomes a first-class shingle. They are packed into bunches, and arc tlien ready fur tlio market. We will now return to (lur ki^-. It lias just lieen run back uii the carria>j;e, an<l awaits further processes. A rope attached to aside drum is made fast to one-half of it, and it is soon lying on its back on the carriage in front of the double circular saws. Through this it passes in rapid rotation till it is sawed into l)road slabs of the proper thickness to make the desired lumber. It is then jia^sed alonjj^ on rollers to the "pony'" saw, when it is a^-ain cut in jiieces of lumber of different sizes as required, such as two by four, four by four, four by si.\, etc. It is then piled u]«)ii a truck and wheeled into the yard, and piled up ready for the market. The other half of the log is sawed into boards, three-quarters of an inch thick. At-the "pony'" saw, part of it is ripi)ed into boards, ten inches wide, and part into plank, four inches wide. The boards, ten inciies wide, pass along to a planing machine, and it comes out rustic siding. The four-inch plank passes through another planing machine, and comes out tongued and grooved ceiling. The heavy slabs which we saw come off the tirst and second time the saw passed through are cut into different lengths, and sawed into the right size for pickets. They are then passed through a planer, then througii a picket-header, a machine with a series of revolving knives, wliich cut out the design of the picket-head the same as the ditierent niembersof a molding are cut out. Thus have we taken our readers through the entire piocess of converting the mighty forest monarchs into lumber. We hojie we have succeeded in making the dcsci'iption of the process, in a small measure at least, as interesting to our readers as it was to us wlien, for the first time, we witnessed it. AVheti you have witnessed the process of making lumber in one mill you have seen it in all, with the e.xception of here and there a minor detail. There are but few mills which use a "dummy" engine to draw their logs to the mill, most of them using iiorses or cattle on the tramwavs. The lumber and wood industi'ies
'- r am indebted to J. AV. Jiagley, C. E. of Guerneville, for interesting figures, lioth as to the size of trees, and yields of redwood lumber near that formerly famous vicinity. Mr. Hagley measured one tree 84!) feet nine inches in height, and another nineteen feet in diameter underneath the bark, and states that the yield of one measured acre scaled in milled lumber 1,431,530 feet board measure."
There are thousands of acres that will yield this amount. During the past few years many thousand acres of redwood timber land, as fast as surveyed, have been taken by individuals in 160 acre locations under the act peculiar to the Pacific States and Territories, for tlie sale of public timber lands, and under the homestead and pre-emption laws. Tracts from 160 to 640 acres in extent of land as good as any that has yet been cut over, can be found in the hands of the original locators, for sale at prices varying with the individual financial needs or business shrewdness of the owners. To secure larger tracts, however, requires a constantly increasing amount of perseverance, energy and capital, in consolidating these small holdings.
The exports of redwood from California have until within two or three years, been merely nominal, and yet with only the local demand, over one-third of the redwood timber area has been cut. As an evidence of the growing scarcity of the wood, we will mention that around Guerneville, in Sonoma County, the price of stumpage has appreciated to ^-4.50 per 1,000 feet. Eight hundred acres at Willow Gulch, in Sonoma County, were sold some time ago by the -North Pacific Coast Ilailroad Company, to Mr. A. Markham, of Duncan's Mills, at the rate of $3.00 ]ier 1,000 feet stumpage. This tract, it is estimated, will cut 100,000,000 feet.
Provenance
Text from An Illustrated History of Sonoma County, California. Containing a History of the County of Sonoma from the Earliest Period of Its Occupancy to the Present Time, published 1889, in the public domain in the United States and digitised by the Internet Archive.