a. Primary and unpublished sources: Interview with George Orlando, Gilroy California, Interview with Carrie Ramelli, Coyote California, Interview with Anthony Silva, Gilroy California, King, F. and P. Hickman, "The Southern Santa Clara Valley: A General Plan for Archaeology," Manu- script on file with the Frederick Burk Foundation for Education, California State University, San Francisco, California. Schmitt, "History of the Santa Clara Valley: The American Period, 18U6-I865." MA thesis, University of California, b. Secondary and published sources: Bohme, "The Portuguese in California," California Historical Society Quarterly. Vol 35, pp. Pearson, R.A. Notes Upon Dairying in California. U.S. Department of Agriculture, Bureau of Animal Industry.
Washington, Raup, "The Italian-Swiss in California," California Historical Society Quarterly. Vol 30, pp. "Santa Clara County and Its Resources," San Jose Mercury, I896. TWIN OAKS DAIRY y HABS No. CA-201& (Page h) Sawyer, E.T. History of Santa Clara County with Biographical Sketches. Los Angeles, California: Thompson and West, Historical Atlas Map of Santa Clara County, Prepared by Emily J. Harris Historic American Buildings Survey August From research compiled hy the Federal Highway Administration Caltrans 1977-I978 TWIN OAKS DAIRY T HABS Ho. CA-201# (Page 5) PART II. ARCHITECTURAL INFORMATION Structure 1: Feed Barn. This large x frame barn functioned in the areas of feed storage, feeding, and milking for the dairy herd.
The feed "barn rises approximately ^0 feet to the peak of the shingled gable roof to allow for hay storage in the mow. The mow is flanked *by a longitudinal milking area on the southwest side and a longitudinal feeding area on the northeast side. This arrangement, known in "barns as a hasilican plan (central "have" with flanking side aisles), was devised for "barns where the span was too great for the rafters to take the load of the roof and too wide for horizontal beams to tie the outer walls at plate level. In this barn, two sets of purlins and. purlin posts result in a central aisle and paired side aisles. The primary purlins and purlin posts demarcate the mow.
The aisles between the primary and secondary purlin posts functioned as a working area and possibly a space for implement storage. The aisles between the secondary purlin posts and the side walls functioned, as noted, as feeding and milking areas. The barn is framed in rough-sawn redwood, with some use of Oregon pine (Douglas fir) in bracing.
The wall posts and plates are while the primary purlin posts are Ux6 and the secondary purlin posts are The primary purlins are paired and the secondary purlins are paired Angle braces in both horizontal and vertical planes In the wall and purlin frames are Rafters are The primary purlin posts on the southwest side are braced to ground level by Oregon pine (Douglas fir) braces which are set in the work aisle on that side- This arrangement precludes implement storage on that side. The northeast work aisle .was served from the northwest end by a door large enough for access for loaded wagons Cor trucks). The main doors for the barn are on the southeast end. There are hay doors at both ends, and a track down the centerline of the barn extends out both hay doors.
A pulley system rigged on this track was used to unload hay wagons or trucks at either end of the barn. The hay was then moved down the centerline track for deposit in the mow. The mow was served on ground level by a tram which was- used to transport hay to the Milking Barn (^Structure 2) immediately to the southeast. The tram carCs) ran on grooves in the concrete floor of the Milking Barn. A grooved concrete pad spans the space between the Milking Barn and the Feed Barn and extends a short distance in- side the main door of the Feed Barn. From this point the tram ran toward the center of the mow on strap iron rails fastened to which rested on the earth floor.
The outside aisle on the northeast side was used as a feeding area, serving the large corral which is sited on that side of the barn. Wooden feed troughs on that side are located outside the secondary purlin posts. The northeast side wall was open to allow access for the cattle to the troughs. The outside aisle on the southwest side was used as a milking; area. TWIN OAKS DAIRY/ HABS No. CA-2G1& (Page 6) A line of stanchions, through which the cows' heads were inserted, runs between the secondary purlin posts. A concrete feed trough lies in the floor of the work, aisle just inside the stanchions. The floor of the milking aisle is concrete, with a manure gutter running the length of the aisle. The use of concrete on the milking side facilitated easy washdown and cleaning.
This structure will "be dis- mantled as part of the Route 101 freeway project, Cochran Road to * Ford Road, Santa Clara County, California. The wood from the structure will he used in restoration and interpretive projects by the San Jose Historical Museum. Structure 2: Milking Barn. Little remains of this structure and its original form is unknown. The building axis is, like the Feed Barn, roughly northwest-southeast, and the building measures 32* x The floor is concrete, with tram grooves down the centerline and two sets of feed troughs and manure gutters. The center portion of the floor containing the tram grooves and feed troughs is raised inches above the level of the flanking milking aisles. The milking stanchions were set in the curbs of this raised area.
Concrete sidewalls are h% feet high and portions of wooden sill remain on top of these. The form of the frame structure which must have risen above this level is unknown. However, the low overhang of large limbs of two mature oak trees indicates that any roof must have been quite low. At the southeast end of the Milking Barn an inclined concrete pad, with grooves for improved footing, leads to the Milk House (Structure 3) # Structure 3: Milk House. This one story structure measures approxi- mately 30* x 22' and is on a modified "L" plan. The floor is a concrete pad, and the walls are also concrete to dado height, and framed above this to plate level. Exterior sheathing is v-groove drop siding, while interior sheathing above dado level is horizontal tongue-and-groove.
The windows were one-over-one-light double hung wood sash, with simple exterior casing. The two doorways on the east side of the building are topped by bracketed hoods, one gabled and the other shed-roofed. There is a hip roof and a square cupola with louvered vents and a hip roof. The roof extends over the handling/loading area on the west side of the building, and is supported by 6 x 6 corner posts. Examination through attic access hatches reveals a former roof on the west side inside the existing extended roof, indicating that the extension over the handling/ loading area is a Mater addition. The roof is shingled, and all eaves are boxed. A concrete water trough is extant on the north side of the building, as are concrete foundation piers for a former water tank.
The interior cooler box is lined in redwood and "Apolloy" galvanized copper steel. This structure will be dismantled as part of the Route 101 freeway project, Cochran Road to Ford Road,'./Santa Clara County, California. It will be relocated to and restored at the San Jose Historical Museum. Structure k: Storage Shed. This is a small, gable-roofed frame structure approximately 10' x on an east-west axis. Sheathing is unbattened vertical boards; the roof is shingled. There is TWIN OAKS DAIRY / HABS No. Ca-201^ (Page T) one door in the east end. The structure rests on a concrete slab floor. The original function is unknown, but perches and nesting "boxes indicate the last use was a pigeon coop.
This structure will be dismantled as part of the Route 101 freeway project, Cochran Road to Ford Road, Santa Clara County, California. The wood from the* structure will be used in restoration and interpretive projects-by the San Jose Historical Museum. Structure 5: This structure is actually a collapsed building. Placed on a timber foundation, it was a frame structure 18' x 32' with wood floor and shingled roof of either gable or shed form. Building form and function are unknown, but it may have been a spring house or pump house as it straddles the headwaters of a large spring. Structure 6: Lattice House. This wood frame structure with open sides is in the yard of the residence (structure 7)* It was probably used for storage, cooling, or as a sitting area. Structure 7: Residence.
This wood frame structure with vertical board and batten siding measures 32' x It has a gable roof and double hung sash windows. The interior is sheathed with grooved plank- ing boards. The structure was possibly built as early as Electrical fixtures appear to have been added ca. An alcove was added to the north side at an unknown date. Structure 8: Wagon Barn. This is a 20' x 32' frame structure with a shed roof. Walls are unbattened vertical boards. The roof is covered with corrugated metal. The building faces northeast, and had two high doors which allowed wagons to enter with tongues folded to the vertical position. The southeast doorway has had the upper half boarded in and a tracked sliding door hung over the lower half.
The doors for the northwest doorway have been removed, but presumably were paired hinged doors. This structure will be dismantled as part of the Route 101 freeway project, Cochran Road to Ford Road, Santa Clara County, California. The wood from the structure will be used in restoration and interpretive projects by the San Jose Historical Museum. Structure 9: Horse and Livery Stable. This one-and-one-half story frame barn measures 50' x 65' and has a hip roof. It is framed in redwood,, using ^xU posts, 2xk plates, and 2x6 rafters. The ridge beam is Walls are unbattened vertical boards. The wall posts are cut at the top in barefaced tenons which hold the plates. A shed-roofed lean-to on the northeast side contains six horse stalls and a small tack room.
The northwest two thirds of the barn was the mow and the southeast third was apparently used for implement storage. Entrance on the southeast end is via a center doorway TWIN OAKS DAIRY HABS Ho. CA-201S (Page 8) # closed "by an interior-hung sliding door on overhead track. Access on the northwest end is through a large open doorway in the southwest corner of the mow. Hipped-roof dormers at each end provide hay doors at loft height. The main roof uses no trusses, but 1x6 span braces are used between rafters in the mow. # The lean-to stall area had access at both ends: at the northwesf'via a doorway and gate leading to a small corral, and at the southeast via a doorway with sliding door on overhead track. The stall floors are raised slightly and are boards.
A hay trough runs the length of the stalls9 allowing feeding from the mow. Grain boxes were provided for oats and barley in each stall. The tack room is located at the southeast end of the stalls. There are windows in the . northeast wall for ventilation and manure removal. This structure will be dismantled as part of the Route 101 freeway project, Cochran Road to Ford Road, Santa Clara County, California. The wood from the structure will be used in restoration and interpretive projects by the San Jose Historical Museum. Prepared by Emily J. Harris Historic American Buildings Survey August From- research compiled by Federal Highway Administration Caltrans PART III.
PROJECT INFORMATION This project was undertaken by the Federal Highway Administration and Caltrans in compliance with Executive Order and a Memorandum of Agreement with the Advisory Council on Historic Preservation as a mitigative effort in the project to improve Route 101 south of Cochran Road in Morgan Hill to north of Ford Road in San Jose. John Burns, ALA, was the HABS project coordinator. Photographs were taken by August 8 and 9> by Pete Asano. The written data was prepared in the HABS office by Emily J. Harris in August from research compiled by the Federal Highway Administration and Caltrans in and architectural descriptions of the buildings that will be dismantled prepared by John Snyder, Caltrans Staff Architectural Historian in