Cache Creek Bridge, Spanning Cache Creek, Dam Road vicinity, Clearlake
Cache Creek Bridge, Spanning Cache Creek, Dam Road vicinity, Clearlake, Lake County, CA. Surveyed as HAER CAL,17-CLEAR,1-, with a 2,023-word written history.
From the record
“The Cache Creek Bridge is one of two known remaining examples of Clinton bridges in California.”
Written record, HAER CAL,17-CLEAR,1- survey. Machine-read text.
Surveyed by the federal HAER program as HAER CAL,17-CLEAR,1- · the record runs 2023 words · one of 2 surveyed structures published for this county.
Source document
Quoted word for word from HAER CAL,17-CLEAR,1-.
Not written, edited or summarised by this site.
East of State Highway 53, immediately south of Dam Road, spanning Cache Creek at the southern edge of the City of Clear Lake, Lake County, California U.S.G.S. Universal Transverse Mercator coordinates: Date of Construction: Fabricator: Clinton Bridge and Iron Works Present Owner; Lake County Public Works Department 255 North Forbes Street Lakeport, California
Significance
1893 words
The headings the report itself prints. Each one jumps to where it begins.
Source document
Quoted word for word from HAER CAL,17-CLEAR,1-.
Not written, edited or summarised by this site.
The Cache Creek Bridge is one of two known remaining examples of Clinton bridges in California. It is also the last remaining through truss highway bridge in Lake County. It represents a type (Parker through truss), period (early century), and method of construction (pin-connected steel truss). The bridge was determined eligible for inclu- sion on the National Register of Historic Places in December Report Prepared by: Alexy Simmons Historical Architecture Specialist HILL NORTHWEST 23 00 Walnut Boulevard Corvallis, Oregon Date: November Cache Creek Bridge HAER No. CA-49 Page 2 The Cache Creek Bridge was constructed over Cache Creek in to replace an earlier wooden bridge. The clear Lake Press noted in May This section of the County is in great need of a new bridge.
The immense volume of water running down Cache Creek this past winter reached to the floor of the present wooden bridge, which is about 90 feet in length, and the floods weakened the bridge seriously. Furthermore, the southern approach was overflown three feet deep for a dis- tance of several hundred feet, and the swift cur- rent made crossing hazardous and for a time impos- sible. With the building of a new bridge, the channel can be widened, and.the approach raised so as to be above high water." The new bridge was a steel Parker through truss bridge fab- ricated by the Clinton Bridge and Iron Works. During their meeting of May the Lake County Board of Supervisors proposed that a new bridge be built across Cache Creek at the site of the existing wooden bridge.
Advertisements for a steel bridge, approximately 150 feet long were prepared on May 6, and County Clerk Mathews was authorized to advertise for bids. The bridge contract was awarded by Lake County to Clinton Bridge and Iron Works of Clinton, Iowa. The bridge was purchased and installed by the County for a cost of The Clinton Bridge Company was begun in by Artemus Lamb with a working capital of The company was founded during a period when earlier timber truss bridges were being condemned and becoming technologically obsolete. The new metal bridges were light and strong, required less mainte- nance than wooden bridges, and were advertised as having a longer use life. By 267 Clinton bridges were scattered throughout the West.
The Clinton fabrication shops were capable of produc- ing steel spans of up to 200 feet for single or multiple-span application. The firm continued to prosper through the and in George Wilson of Sterling, Illinois, bought the company, renaming it the Clinton Bridge and Iron Works. The Wilson era was one of expansion, and the company opened a San Francisco office in It was undoubtedly this local office, which operated through which handled the order for the Cache Creek Bridge and facilitated its rapid Cache Creek Bridge HAER No. CA-49 Page 3 delivery. By the first decade of the century, Clinton Bridge and Iron Works regularly employed more than 200 men, and could claim literally thou- sands of bridges throughout the West.
In the firm shortened its name to Clinton Bridge Works, and further expanded its plant. In the company joined three other firms to form the Four V Steel Companies; in they changed the name to Allied Structural Steel Company undoubtedly reflecting the patriotism of World War II. Affiliation with the Wilson family ended in when descendants sold their stock to Allied. The firm continues today in bridge fabrication, and also counts among its notable works involvement in the Project Apollo assembly building at Cape Canaveral in Construction of the Parker truss bridge over Cache Creek was begun in September The local newspaper noted: "Work on the new steel bridge across Cache Creek is being pushed right along under the direction of [construction] Supervisor Rice.
A ford has been made must below the bridge which will afford passage to travel during the time the bridge is out of commission. Supervisor Adamson is closely attending the progress of the work." The names of the Lake County super- visors and clerk who authorized the new bridge are listed on the bridge nameplates, which read: "T. Patten, H.E. Cheney, Adamson, Phillips, Kelsay, S. Mathews, Co. Clerk, Clinton Bridge and Iron Work Builders, Clinton, Iowa." (See photo 4.) A The bridge was inspected by the Lake County Supervisors on October 14, "found satisfactory in every detail and accepted by the supervisors" who then attended a banquet in their honor at the Geenzier Hotel.
The structure was described as being "substantially constructed throughout^ and is by a wide margin the best bridge in Lake County." The bridge became a California state highway structure in A restricted speed of 5 miles per hour was posted for vehicles over 5 tons on May 19, On November 17, additional restrictions on the weight of loads that crossed the bridge were posted. Loads were restricted to: "8 TONS PER VEHICLE 12 TONS PER SEMI-TRAILER COMBINATION 14 TONS PER TRUCK AND FULL TRAILER" ' In the fall of substantial maintenance to the Cache Creek Bridge was conducted by the State of California Cache Creek Bridge HAER No. CA-49 Page 4 Transportation Department. Three thousand three hundred and fifty dollars was authorized under Work Order No. for repairs to the bridge.
The former wearing surface, floor, wheel guards, and other timber members were removed and replacedawith salt-treated fir and a new oil macadam wearing surface. In the bridge was relinquished to Lake County, and State Highway 53, which is about half a mile west of the bridge, became the main state highway route. In the Cache Creek Bridge was again picked up by the State of California Department of Transportation, this time as a Fed- eral-Aid Secondary route. The Cache Creek Bridge crosses Cache Creek at a right angle (west of north). The bridge is a pin-connected steel Parker * through truss bridge.
The structure consists of a single span, 152 feet in length, feet in width, with a 14.7-foot one-lane roadway between timber curbs (wheel guards) and light lattice steel railings (see photos 1 through 3). Bridge nameplates that commemorate the bridge's construction date and the county officials involved in its erection are located on each end of the bridge (see pho- to 4) . The bridge is decked with treated Douglas fir planks (6 inches x inches) with 6-inch centers, laid diagonally on transverse treated Douglas fir planks inches x inches) spaced 2 inches apart having 14-1/2-inch centers The deck has a 1-1/2-inch asphalt wearing surface between untreated Douglas fir wheel guards (see photo 5).
The wheel guards consist of 7-inch x 7-inch untreated Douglas fir timbers with 3-1/2-inch scupper blocks. The bridge has ^ seven I-beam stringers, similar to Carnegie with the exterior channels being similar to Carnegie The bridge floor beams are Illinois I type (similar to Carnegie located at each of the panel points. The top flange is laterally supported at each stringer by means of bolts. The end connections have four 3/4-inch-diameter rivets in double shear. (See photos 6 through 9). The structure is supported on concrete-filled cylinder abutments with a concrete diaphragm between the cylinders (see photos 10 through A masonry wall is located in front of the northwest abutments.
The bridge has a vertical clearance of 12 feet 10 inches at the deck edge and 13 feet 7 inches at 2 feet from the deck edge. The trusses consist of ten panels set 15 feet apart for a span of 150 feet. The fourth panels are 24 feet from upper panel point center pin to lower panel point center pin. The Cache Creek Bridge HAER No. CA-49 Page 5 second panels are 21 feet from upper panel point center pin (see photos to lower panel point center pin. The first panels are 17 feet from upper panel point pin to lower panel point pin. The end posts and top chords consist of a 14-inch-wide by 1/4-inch-thick top plate on two channels (similar to Carnegie with a single lacing on the bottom made up of l-l/2-inch by 1/4-inch bars. Table 1 contains a detailed description of the truss members.
The Cache Creek Bridge will be replaced by a new two-lane bridge. Lake County will matchmark, dismantle, and truck the bridge to the Lake County Southshore storage yard. The County will attempt to identify a party, through advertising for a period of 30 days if necessary, that will relocate, reconstruct, and maintain the bridge in accordance with "The Secretary of the Interior's Standards for Rehabilitating Historic Buildings." If a recipient for the bridge cannot be found in the time specified, final disposal of the structure and its part may occur. Table 1
Cache Creek Bridge Truss Members
Location Description Total* Lower panel point 0 2-1/2-inch by 13/16-inch to lower panel point 2 I-bar Lower panel point 2 4-inch by 3/4-inch to lower panel point 4 I-bar Lower panel point 4 4-inch by 15/16-inch to lower panel point 6 I-bar Upper panel point 1 2-7/16-inch by 5/8-inch to lower panel point 1 I-bar Upper panel point 2 Two 5-3/8-inch base to to lower panel point 2 base channel (similar to Carnegie with single lacing on top and bottom L For one side of the bridge. Cache Creek Bridge HAER No.
CA-49 Page 6 Table 1 (continued) Location Description Total' Upper panel point 4 Two 5-3/8-inch base to 2 to lower panel point 4 base channel (similar to Carnegie with single lacing on top and bottom Upper panel point 3 Two 2-inch by 2-inch by 2 to middle panel point 3 1/4-inch angles, 9 inches base to base Upper panel point 5 Two 2-inch by 2-inch by 1 * to middle panel point 5 1/4-inch angles, 9 inches base to base (see photo 15) Middle panel point 3 Single channel (similar 2 to lower panel point 3 to Carnegie Middle panel point 5 Single channel (similar 1 to lower panel point 5 to Carnegie Upper panel point 1 2-1/2-inch by 5/8-inch 2 to lower panel point 2 I-bar Upper panel point 2 2-1/2-inch by 3/4-inch 2 to middle panel point 3 I-bar Middle panel point 3 2-inch by 5/8-inch 2 to lower panel point 4 I-bar Upper panel point 4 2-inch by 5/8-inch 2 to lower panel point 5 I-bar Middle panel point 3 1-inch square rod with 2 to upper panel point 4 upset threads and turn buckle Lower panel point 4 1-inch square rod with 2 to middle panel point 4 upset threads and turn buckle For one side of the bridge.
Source: Frank C. Heggli. Bridge Report: Revised Original Report Bridge No. (On file at Caltrans, Sacramento, California), 4- Cache Creek Bridge HAER No. CA-49 Page 7 ENDNOTES 1. "Supervisors Plan New Steel Bridge," The Clear Lake Press, 8 May p. 1. 2 John W.Snyder, "An Evaluation of Cache Creek Bridge on Lake Street, FAS Lake County, California" in Cache Creek Bridge Replacement, Lake County, California Environmental Assessment (Sacramento, California: HILL) , B-3 . 3. "Lower Lake New Steel Bridge Progressing," The Clear Lake Press, 11 September p. 5. 4. "Supervisors Accept Cache Creek Bridge." The Lake County Bee, 21 October p. 1. 5. Ibid. 6. Frank C. Heggli, Bridge Report: Revised Original Report Bridge No. (On file at Caltrans, Sacramento, California), 3. 7. Ibid., 3. 8. Albert A.
Lernhart. Supplementary Bridge Report, Cache Creek Bridge I-Lak-49-C (On file at Caltrans, Sacramento, California), 1.
The federal survey recorded these other structures elsewhere in Lake County. These are the other structures
they measured and filed a report on, longest report first.
Written history. Quoted verbatim from HAER CAL,17-CLEAR,1-. United States federal work, no copyright under 17 U.S.C. 105.
Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.