BlockBefore

Death Valley Ranch, Gravel Plant-Bunker, Death Valley Junction

Death Valley Ranch, Gravel Plant-Bunker, Death Valley Junction, Inyo County, CA. Surveyed as HABS CAL,14-DVNM,1-J-, with a 1,375-word written history.

From the record

“Gravel and sand washing was a large part of the construction operations at Death Valley Ranch from the outset.”

Written record, HABS CAL,14-DVNM,1-J- survey. Machine-read text.

Surveyed by the federal HABS program as HABS CAL,14-DVNM,1-J- · the record runs 1375 words · one of 71 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Significance

1235 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HABS CAL,14-DVNM,1-J-. Not written, edited or summarised by this site.

Gravel and sand washing was a large part of the construction operations at Death Valley Ranch from the outset. The tremendous reliance on the use of concrete for almost every structure at the Ranch made providing their own aggregates a cost-saving measure. The surviving structure illustrates Johnson's willingness to experiment with and utilize different technologies. PART

Historical Information

Note: For general information on the Death Valley Ranch complex, see HABS No. CA-2257. A. Physical History: 1. Date of Erection: By December - The previous "gravel pit," located "between the two springs" was made operational.1 March - The operation was moved to its present location and referred to as the "gravel bunkers."2 August and September - Plans were prepared by Thompson to enlarge the facility.3 By October - The facility was enlarged to approximately four times its previous size and put into operation.4 2. Engineer: The system was probably designed by M. Roy Thompson and Albert M. Johnson in concert with The Stephens-Adamson Co., the supplier of the machinery. DEATH VALLEY RANCH GRAVEL PLANT HABS No.

CA-2257 J (Page 2) 3, Original and Subsequent Owners: Albert Mussey Johnson Gospel Foundation National Park Service (1970-Present) 4. Builder, Manufacturer, etc: General Superintendent - M.Roy Thompson Building Superintendent - F.X.A. Kreil H. B. Brown C. G. Johnson Manufacturers of gravel washing, conveying and screening machinery - Stephens-Adamson Co., Los Angeles, California. 5.

Original plans and construction: The first "gravel pit" operation was located "between the two springs." Men pushed wheelbarrows of dirt up a 40 foot incline, dumped them onto a 10 foot length of sloping corrugated iron and washed it all down over a half-inch screen to separate sand and gravel for use in construction.5 Because the soil there proved to contain too much sand, by March a "gravel bunker" was constructed in "the wash just west of the lower field." The new location necessitated the laying of 600 feet of 2" water piping to supply it with water.6 In August and September Thompson oversaw the arrangements for the enlargement of the facility to almost four times its previous size.

By October, construction was completed and Thompson was able to report that "[t]he new gravel and sand plant works perfectly and turns out excellent material at less than one- third the former cost. It will pay for itself in a short time."8 The facility was designed to handle "between one hundred and one hundred and fifty yards per day of sand and gravel." 6. Alterations and additions: The NFS is currently in the process of stabilizing the structure after many years of neglect and decay. Over the years flash floods have swept down the canyon and have buried the first few feet of the facility. The present plans include excavation of the lower portions of the timber cribbing and constructing large wooden braces banked into the sand to prevent the cribbing from bulging out any further.

Plans to proceed beyond this point will be evaluated once this portion of the work is completed. DEATH VALLEY RANCH GRAVEL PLANT HABS No. CA-2257 J (Page 3) PART II. ARCHITECTURAL INFORMATION A. General Statement: 1. Architectural Character: Although in a state of disrepair, the facility is still not beyond restoration. The 8" x 8" railroad tie timber cribbing is reinforced with steel, and forms the exterior wall for the three sides of the structure. In the rear is an inclined slope for trucks and equipment to reach the upper platform to dump loads of sand and gravel. A wooden guard rail with several missing members runs along the top for the length of the east facade.

All the washing and conveying equipment was on this side, most of which was suspended by a timber platform approximately 20' square in size that extends out from the main bulkhead. The facility retains much of the original equipment, such as the tapered rotary drum, a conveyer belt, gearing and screens, used to separate and wash gravel and sand. 2. Condition of Fabric: Poor. B. Description of Exterior: 1. Over-all dimensions: long x 26' wide x 16' high. 2. Foundations: Railroad tie framing throughout. 3. Structural system, framing: The three exterior sides are constructed of 8" x 8" railroad ties in a crib-like fashion. They are joined by steel reinforcement bar. The two shorter sidewalls are strengthened with a second inner wall of the same type and size.

The area above is just hard-packed dirt and gravel. A wooden guard rail with' several members now missing runs around the perimeter. D. Site: The structure in plan is U-shaped and faces southeast. It sits in the midst of a large wash running down Grapevine Canyon and flood waters present a maintenance problem because of it. Although the facility is somewhat removed from the Castle grounds proper, it is quite visible from some higher vantage points, such as the upper story of the Main House. Space for overflow parking that borders the structure to the northwest and northeast was created by the A temporary wire fence surrounds the structure to prevent visitors and unauthorized personnel from climbing it and resulting in injury or permanent damage. DEATH VALLEY RANCH GRAVEL PLANT HABS No.

CA-2257 J (Page 4) PART III. PROJECT INFORMATION The Scotty's Castle Recording Project at Death Valley National Monument, California, was undertaken during the summers by the Historic American Buildings Survey (HABS) division of the National Park Service, and co- sponsored by the Western Regional Office of the National Park Service, Principals involved were Robert J. Kapsch, Chief of HABS/HAER; Kenneth L. Anderson, AIA, Chief of HABS and project leader in and and Paul D. Dolinsky, Principal Architect of HABS and project leader In The recording teams were supervised in the field by Marlys B. Thurber in John White in and Joseph D. Balachowski in The written documentation was prepared by Richard A. Bernstein of Cornell University in PART IV.

SOURCES OF INFORMATION The repository of nearly all of the sources of information is the Reference Library and Preservation Office, Scotty's Castle, Death Valley National Monument, California. Individual references take the form of endnotes, as follows: 1. Letter from M. Roy Thompson to Albert M. Johnson dated December 31, Manuscript 7, box 1. 2. Letter from M. Roy Thompson to Albert M. Johnson dated March 16, Manuscript 7, box 1. 3. Letters from M. Roy Thompson to Albert M. Johnson dated August 26, September 10, September 17 and September 29, Manuscript 7, box 12. 4. Letters from M. Roy Thompson to Albert M. Johnson dated October 3, October 8 and October 29, Manuscript 7, box 12. 5. Letter from M. Roy Thompson to Albert M. Johnson dated December 31, Manuscript 7, box 1. 6. Letter from M.

Roy Thompson to Albert M. Johnson dated March 16, Manuscript 7, box 1. 7. Letter from M. Roy Thompson to Albert M. Johnson dated August 26, September 10 and September 17, Manuscript 7, box 12. 8. Letters from M. Roy Thompson to Albert M. Johnson dated October 3, October 8 and October 29, Manuscript 7, box 12. 9. Stephens-Adamson Co., to M. Roy Thompson dated August 6, Manuscript 12, box 6, ADDENDUM TO: HABS CA-2257-J DEATH VALLEY RANCH, GRAVEL PLANT-BUNKER CAL, (Gravel Separator) Death Valley National Park Death Valley Junction vicinity Inyo County California REDUCED COPIES OF MEASURED DRAWINGS FIELD RECORDS HISTORIC AMERICAN BUILDINGS SURVEY National Park Service U.S. Department of the Interior C Street NW Washington, DC

In context

Death Valley Junction, California The place record: every map, photograph and survey of this town.
Inyo County, California 448 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Death Valley Junction

24 of 27 records shown

The federal surveyors worked through Death Valley Junction building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
Death Valley RanchHABS CAL,14-DVNM,1-25,718 words
Keane Wonder MineHAER CA-29124,024 words
Skidoo MineHAER CA-29019,174 words
Gold Hill MillHAER CA-29218,782 words
Furnace Creek Visitor CenterHABS CA-286016,027 words
Bonnie Clare RoadHALS CA-8915,327 words
Death Valley RanchHABS CAL,14-DVNM,1-A-4,425 words
Death Valley RanchHABS CAL,14-DVNM,1-D-3,839 words
Death Valley RanchHABS CAL,14-DVNM,1-E-2,942 words
Death Valley RanchHABS CAL,14-DVNM,1-C-2,908 words
Death Valley RanchHABS CAL,14-DVNM,1-F-2,593 words
Death Valley RanchHABS CAL,14-DVNM,1-G-2,496 words
Death Valley RanchHABS CAL,14-DVNM,1-B-2,448 words
Death Valley Lower Grapevine RanchHABS CAL,14-DVNM,2-2,202 words
Death Valley RanchHABS CAL,14-DVNM,1-K-1,602 words
Death Valley RanchHABS CAL,14-DVNM,1-I-1,573 words
Death Valley RanchHABS CAL,14-DVNM,1H-1,475 words
Death Valley RanchHABS CAL,14-DVNM,1-M-121 words
Twenty Mule Team Borax WagonsHAER CAL,14-DVNM,4-82 words
Death Valley RanchHABS CAL,14-DVNM,1-N-77 words
Death Valley National Park RoadsHAER CAL,14-DVNM,3-46 words
Death Valley Lower Grapevine RanchHABS CAL,14-DVNM,2-C-42 words
Death Valley Lower Grapevine RanchHABS CAL,14-DVNM,2-A-40 words
Death Valley Lower Grapevine RanchHABS CAL,14-DVNM,2-B-39 words

Provenance

  • Written history. Quoted verbatim from HABS CAL,14-DVNM,1-J-. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.