BlockBefore

Generals Highway, Clover Creek Bridge, Spanning Clover Creek on Generals Highway, approximately 22 miles northeast of Ash Mountain Entrance, Three Rivers

Generals Highway, Clover Creek Bridge, Spanning Clover Creek on Generals Highway, approximately 22 miles northeast of Ash Mountain Entrance, Three Rivers, Tulare County, CA. Surveyed as HAER CAL,54-THRIV.V,2B-, with a 1,814-word written history.

From the record

“The Clover Creek Bridge was an important link of the Generals Highway allowing for construction to continue to the General Grant Tree, creating a continuous loop connecting Sequoia National Park with General Grant National Park in The concrete arch bridge with masonry facade is a good surviving example of National Park Service rustic aesthetic.”

Written record, HAER CAL,54-THRIV.V,2B- survey. Machine-read text.

Surveyed by the federal HAER program as HAER CAL,54-THRIV.V,2B- · the record runs 1814 words · one of 33 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Location

99 words

Source document Quoted word for word from HAER CAL,54-THRIV.V,2B-. Not written, edited or summarised by this site.

Spanning Clover Creek on the Generals Highway, approximately 22 miles northeast of the Ash Mountain Entrance, Sequoia National Park, Three Rivers vicinity, Tulare County, California. 77re . /fivers. USGS quadrangle: Giuiife"*ULLjL, California UTM: Date of Construction: Structure type Reinforced concrete filled spandrel arch bridge Contractor: W. A. Bechtel Co., San Francisco, California Subcontractors: CD. DeVelbiss, San Francisco Arise-Knapp Co., Oakland, California A. Pernu Glen Falls Indemnity, Co. Designer: Bureau of Public Roads Architectural Plans: John B. Wosky, National Park Service Engineer: Eric E. Erhart, Bureau of Public Roads Owner: Sequoia National Park, National Park Service Use: Park road bridge

Significance

64 words

Source document Quoted word for word from HAER CAL,54-THRIV.V,2B-. Not written, edited or summarised by this site.

The Clover Creek Bridge was an important link of the Generals Highway allowing for construction to continue to the General Grant Tree, creating a continuous loop connecting Sequoia National Park with General Grant National Park in The concrete arch bridge with masonry facade is a good surviving example of National Park Service rustic aesthetic. GENERALS HIGHWAY, CLOVER CREEK BRIDGE HAER No. CA-140B (page 2)

Written history

1575 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CAL,54-THRIV.V,2B-. Not written, edited or summarised by this site.

Documentation of the Clover Creek Bridge is part of the Generals Highway Recording Project, conducted during the summer of under the co- sponsorship of HABS/HAER and Sequoia National Park. This is one in a series of reports prepared for the Generals Highway Recording Project, undertaken by the Historic American Engineering Record in summer For an overview history of the Generals Highway, see HAER No. CA-140,

Generals Highway

Christina Slattery, HAER Historian, GENERALS HIGHWAY, CLOVER CREEK BRIDGE HAER No. CA-140B (page 3) INTRODUCTION The construction of the Clover Creek Bridge between the Lodgepole Campground and the current development of Wuksachi on the Generals Highway allowed for the extension of the Generals Highway from Sequoia National Park towards General Grant National Park (now a part of Kings Canyon National Park). The 90' rein- forced concrete filled spandrel arch bridge with stone masonry spandrel walls spans the granite canyon of Clover Creek. The bridge was constructed under the same contract as the Lodgepole Bridge [HAER No.

CA-140A] and the Silliman Creek culvert under the supervision of the Bureau of Public Roads The Clover Creek and Lodgepole bridges were the first drainage structures larger than culverts constructed by the BPR in Sequoia. Included in the grading contract, the original plans called for a masonry arch culvert to cross Clover Creek, but before construc- tion commenced the culvert was dropped and designs were prepared for a bridge.1 Following the completion of the structural plans by the the bridge design was prepared by John B. Wosky, resident summer landscape architect for Sequoia and Yosemite national parks, in April BPR engineers generally handled engineering details for such structures while Park Service landscape architects prepared or approved architectural plans.

Stone-faced concrete arch bridges were widely employed in parks in the and The National Park Service constructed stone-faced bridges at Yosemite and Mount Rainier even before the Bureau of Public Roads became involved in park road projects in Wosky was involved with the design and landscaping of several of the Yosemite bridges. Stone-faced bridges were also prominent features of the urban parkways of the period, and were especially popularized by the Bronx River Parkway in New York City and Westchester County, New York. The Park Service sent Wosky and Ken Carter to Westchester County to study the parkway, which was the first urban parkway opened to motor vehicles. On the Bronx River Parkway, they observed the construction of modern *Eric E.

Erhart, Senior Engineering Inspection Superintendent, Bureau of Public Roads, Final Construction Report on the Lodgepole, Silliman, and Clover Creek Bridges, Route 1, Generals Highway, Sequoia Dl, Sequoia National Park, Tulare County, California, (San Francisco, CA: Bureau of Public Roads, 2. GENERALS HIGHWAY, CLOVER CREEK BRIDGE HAER No. CA-140B (page 4) concrete arch bridges with a traditional stone appearance. The design and construction method were adapted for use in the national parks including the Clover Creek and the Lodgepole Bridges in Sequoia.

The use of rough masonry, often quarried locally, conformed the appearance of the bridge to blend with its natural surroundings; this was part of a rustic aesthetic advocated by the Park Service landscape architects who wanted park developments to harmonize with their surroundings.

Description

Clover Creek Bridge is a concrete arch structure with a self- supporting masonry spandrel wall thick, supporting a roadway 25' wide.2 In a letter describing the bridge, BPR engineer George Attwell boasted "engineers compute that this bridge has sufficient strength to carry the world's tallest building loaded with thousands of tons of the heaviest machinery." The bridge foundation, set in the granite canyon, allowed strength and minimal chance of failure in the footings. The roadway was also superelevated; if a car approached the bridge at a set speed, it would follow the road and turn natur- ally, without the driver turning the wheel. Attwell described this design feature: "The bridge is on a curve, and if the floor were level the cars would naturally lead to the outside.

The deck of this bridge is elevated so a car driving 25 to 35 miles per hour will ride as easily as though it were on a level straight road."3 CONSTRUCTION Financing for the bridge came from National Park Service road funds allocated between the and seasons. The BPR advertised the contract for the bridges and approaches in trade journals in June The agency received three bids for the structures ranging from to and awarded the contract in July to the lowest bidder, the W. A. Bechtel Company, giving the firm 200 days to complete the bridge.4 The BPR assigned Senior Engineer Inspection Superintendent Eric E. Erhart as resident engineer for the project. 2 Ibid., 12. 3 Walter G. Attwell, Engineer, Bureau of Public Roads, to E. C. Snell, 28 September 3. SEKI Archives. 4 Erhart, 3.

GENERALS HIGHWAY, CLOVER CREEK BRIDGE HAER No. CA-140B (page 5) Bechtel established a construction camp one mile west of Clover Creek early in August and began excavation on 11 August. Winter weather conditions in November shut down the project for the season with only 31 percent of the work completed. Progress to this point included the pouring of the concrete arch in one pour lasting 48 hours, the excavation of 70 percent of the structure, and the quarrying of 80 percent of the arch ring stones.5 The contractor was permitted to use granite from the excavation for the arch ring stones and obtained several granite slabs thick that also provided stone for the Marble Fork Bridge.

When the supply of granite on site was exhausted a quarry was opened about 300 yards below the Clover Creek Bridge. This quarry supplied stone for about 75 percent of the walls and then a second quarry was opened north of the highway about 1/2 mile west of Clover Creek.6 The contractor was inexperienced in the areas of cement rubble masonry and stone work and as a result encountered many problems that forced him to subcontract a majority of the work. For example, rock at the quarry site was not tested prior to the construction of the crushing plant and the site had to be abandoned because the stone was found to be structurally weak.

The new quarry site located about 1/4 mile from the crushing plant proved inefficient because additional time and money had to be spent transporting the rock to the plant. National Park Service landscape architects placed strict controls over the construction methods and post construction appearance of the site.

In order to ensure the preservation of the natural canyon, the specifications called for no spalled or chipped areas of the natural rock to show "beyond the neat lines of the completed structure." As a result, the contractor resorted to the use of plugs and feathers along the front faces of abutments and wing walls, using closely spaced holes and light charges of 40 percent dynamite for removing the body of the excavation."7 The restrictions increased both the amount of work and time needed for project completion but were necessary for the conservation of the landscape. 5 Ibid., 4. 6 Ibid., 7 Ibid., 6. GENERALS HIGHWAY, CLOVER CREEK BRIDGE HAER No. CA-140B {page 6) Construction resumed 11 May but in order to complete the project Bechtel subcontracted all of the remaining work. C. D.

DeVelbiss of San Francisco was engaged as the subcontractor and he in turn subcontracted specialized items of work such as the stone cutting to A. Pernu. Pernu was unable to finance his work and the project was taken over by the Glen Falls Indemnity Company. Learning a lesson from Bechtel's mismanagement of the stone work, the bonding company's replacement contractor decided to use patterns for the cutting of the facing stones. The wooden patterns or templates were made at the bridge brought to the quarry where the stone was cut. The ring stones at Clover Creek were mainly cut by an air surfacing machine and only the curved soffits were hand cut. Erhart's final construction reports indi- cated that "[as] each stone was set a 1 by 1" strip was placed in all face joints.

This gave the finished walls an appearance and uniformity not existing at Silliman and Lodgepole Bridges."8 The bridge was completed 19 October at a cost of Although the contractor and subcontractors all suffered losses from the project the work was approved by both BPR engineers and NPS landscape architects. The historic Clover Creek Bridge was listed in the National Register of Historic Places in 8 Ibid.,10. 9 Ibid. GENERALS HIGHWAY, CLOVER CREEK BRIDGE HAER No. CA-140B (page 7)

Bibliography

All correspondence, reports, and documents are available in the historic resource files of the Sequoia National Park Archives (abbreviated as SEKI Archives). Attwell, Walter G., to E .C. Snell, 28 September Erhart, Eric E., Senior Engineering Inspection Foreman, Bureau of Public Roads. "Final Construction Report on the Lodgepole, Silliman, and Clover Creek Bridges, Route 1, Generals Highway, Sequoia National Park, Tulare County, California, San Francisco, CA: Bureau of Public Roads, 27 February Tweed, William. National Register of Historic Places Nomination for Marble Fork and Clover Creek Bridges, Sequoia National Park. 28 March Wosky, John B. Interview by William Tweed.

23 March (JLUVJiK (JK J K JiKlDGE Sequoia National Park Roads and Bridges Spanning Clover Creek on Generals Highway, approximately 22 miles NW of Ash Mountain Entrance __^ . /' t { (Tulare County ' Callfornia 5\-lHRiV.\[, XEROGRAPHIC COPIES OF COLOR TRANSPARENCIES HISTORIC AMERICAN ENGINEERING RECORD National Park Service Department of the Interior P.O. Box Washington, r

In context

Three Rivers, California The place record: every map, photograph and survey of this town.
Tulare County, California 365 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Three Rivers

19 records

The federal surveyors worked through Three Rivers building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
Generals HighwayHAER CAL,54-THRIV.V,2-15,423 words
Ash Mountain Administration BuildingHABS CA-28964,881 words
Generals HighwayHAER CAL,54-THRIV.V,2A-1,491 words
Marble Fork BridgeHAER CAL,54-THRIV.V,3-1,366 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-D-268 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-E-266 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-A-251 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-C-240 words
Oak Grove BridgeHAER CAL,54-THRIV,1-236 words
Pumpkin Hollow BridgeHAER CAL, 54-THRIV,2, 236 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-F-235 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-L-36 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-I-35 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-J-35 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-G-34 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-H-33 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-K-33 words
Giant Forest Lodge Historic DistrictHABS CAL,54-THRIV.V,1-B-32 words
Shelter CabinHABS CAL,10-BIBI.V,1-28 words

Provenance

  • Written history. Quoted verbatim from HAER CAL,54-THRIV.V,2B-. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.