Marine Corps Air Station Tustin, East of Red Hill Avenue between Edinger Avenue & Barranca Parkway, Tustin
Marine Corps Air Station Tustin, East of Red Hill Avenue between Edinger Avenue & Barranca Parkway, Tustin, Orange County, CA. Surveyed as HABS CAL,30-TUST,1-, with a 10,655-word written history.
From the record
“MCAS Tustin was originally built to support the function of the LTA ships and later became a major center for Marine helicopter aviation on the West Coast.”
Written record, HABS CAL,30-TUST,1- survey. Machine-read text.
Surveyed by the federal HABS program as HABS CAL,30-TUST,1- · the record runs 10655 words · one of 68 surveyed structures published for this county.
Source document
Quoted word for word from HABS CAL,30-TUST,1-.
Not written, edited or summarised by this site.
At the intersection of Moffett Drive and Maxfield Street and at the intersection of Windmill Road and Johnson Street. Within the current boundaries of the Marine Corps Air Station, Tustin. In the City of Tustin, Orange County, California. USGS Tustin Quadrangle, Universal Transverse Mercator Coordinates: Northern LTA Ship Hangar No. 28) 11 423650E Helium Tank Building No. 28A) 11 423590E Northern LTA Ship Hangar No. 29) 11 423700E Helium Tank Building No. 29A) 11 423780E Mooring Mat 1 11 424080E Mooring Mat 2 11 424340E Mooring Mat 3 11 424305E Mooring Mat 4 11 424200E Mooring Mat 5 11 424205E Construction Date: Engineer/Architect: Arsham Amirikian, Navy Bureau of Yards and Docks, Washington, Holmes & Narver Consulting Engineers, Los Angeles [local oversight] James I.
Barnes Construction Company, Santa Monica [local contractor]
Present Use
44 words
Source document
Quoted word for word from HABS CAL,30-TUST,1-.
Not written, edited or summarised by this site.
The base is currently closed. The northern lighter-than-air (LTA) Ship Hangar (Building 28) is abandoned; the southern LTA Ship Hangar (Building 29) is used by model plane club; the helium tank buildings (Buildings 28A and 29A) are used for storage, Mats 1-5 are abandoned.
Significance
10360 words
The headings the report itself prints. Each one jumps to where it begins.
Source document
Quoted word for word from HABS CAL,30-TUST,1-.
Not written, edited or summarised by this site.
MCAS Tustin was originally built to support the function of the LTA ships and later became a major center for Marine helicopter aviation on the West Coast. The lighter- than-air ship hangars represent a major engineering achievement of World War II, and remain among the largest wood-framed structures in the world. Together with their associated helium tank buildings and mooring mats, they form a discontiguous National Register District (National Register of Historic Places They mark a significant period of American history when the development of airships played a critical role in America's anti-submarine defense.
They are part of a small group of seven similar blimp hangars built in the United States during that remain intact at their original sites as of MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 2
Historical Information
Physical Setting of The Lighter-than-air Ship Hangars Marine Corps Air Station (MCAS) Tustin encompasses approximately acres and lies within the boundaries of two local jurisdictions. The majority of the property lies within the City of Tustin but a portion lies within the City oflrvine and the northwest boundary is adjacent to the City of Santa Ana (City of Tustin The Air Station is within an area bounded by four freeways; State Route 55, Interstate 5, State Route and Interstate The major roadways bordering the site include Red Hill Avenue on the northwest, Edinger Avenue/ Irvine Center Drive on the northeast, Harvard Avenue on the southeast, and Barranca Parkway on the southeast.
With the urbanization of Orange County over the past 50 years, the Air Station has become an island of military land use within a highly urbanized location. MCAS Tustin is bounded by single-family residential uses and a business park to the northeast, light industrial and research/development uses to the northwest, light industrial and commercial uses to the southwest, and a combination of single-family and multi-family residential uses to the southeast. MCAS Tustin, which has been closed under the Base Realignment and Closure Program, includes training grounds, maintenance and storage facilities, medical/dental facilities, administrative facilities, housing, community support facilities, recreational facilities, agricultural fields and airfields.
The airfields include circular concrete pads (Mooring Mats for blimp and helicopter use, and a linear runway for helicopters to practice tactical maneuvers. The Air Station itself contains more than 250 military structures and facilities as well as more than family housing and barracks units. The largest of the structures are the Lighter-than-air (LTA) Ship Hangars (Buildings 28 and 29) and their ancillary structures (Buildings 28A, 29A, and Mooring Mats which are located within the boundaries ofMCAS, Tustin (see Figure 1 and 2). Local Context - Development of MCAS Tustin The decision to establish a lighter-than-air (LTA) station was made during World War II for the purpose of patrolling coastal waters to protect shipping and to guard against enemy submarines.
Beginning in the Navy commissioned timber LTA hangars at 17 locations. These were all engineered and designed by Arsham Amirikian, Chief Engineer for the Navy Bureau of Yards and Docks. In March Holmes & Narver Consulting Engineers of Los Angeles were contracted to design a LTA station to accommodate the planned LTA Ship Hangars (Roesling Nakamura Architects, Inc. The base was commissioned as the Santa Ana Lighter-Than-Air Base in the fall of (City of Tustin The following month, James I. Barnes Construction Company of Santa Monica, CA, was contracted for the construction by BuDocks (U.S. Bureau of Yards and Docks) and work began later that month.
The first phase of construction in consisted of MARINE CORPS AIR STATION TUSTIN (MARINE HELICOPTER AIR STATION TUSTIN) LOS AN~_S..fQU.!"I'L- ---OAANGE COUNTY HABS NO. CA- PAGE3 CORONA Brea MUNICIPAL '.1(AIRPORT Placentia Orange Garden s Grove 2 Tustin ~ Westminster ,<:-a o~,~h Fountain Valley ~ol?'q1, -. . iol) COrr, 'O'or Lake Forest Mission Viejo Figure 1 0 No Scale Regional Map Tustin H.A.B.S Tustin H.A.B.S/ Figures/Fig l Regional Map MARINE CORPS AIR STATION TUSTIN (MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page4 SCCRA/OCTA RAILWAY EDINGER AV VALENCIA AV WARNER AV DYER RD ;ic ;ic ;ic Cl BARRANCA a: ;ic ..J (!) z<( w Cl ..J z w a: :i: 0 :;; a: <( Cl a: a: 0 > w f- en ~ ID :;; a: a: :;; <( a: z <( -, I <( 0 > REUSE PLAN BOUNDARY A NORTHERN LTA SHIP HANGAR (HANGAR #1; B HELIUM TANK BUILDING (BUILDING #28A) C SOUTHERN LTA SHIP HANGAR (HANGAR #2; D HELIUM TANK BUILDING (BUILDING #29A) E CONNECTION ROAD FOR MOORING MATS F CONNECTION ROAD FOR MOORING MATS G MOORING MAT #1 H MOORING MAT #2 I MOORING MAT #3 J MOORING MAT #4 K MOORING MAT #5 L MOORING MAT #6 (PREVIOUSLY DEMOLISHED) Figure 2 Location Map 0 0 Feet Tustin H.A.B.S Tustin/ H.A.B.S/Figures!Fig 2 LOCATION MAP MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 5 the hangars and several other structures to support the hangar's function and to accommodate the personnel needed to make the base operational (City of Tustin These included a barracks, mess hall, gate house, paint and oil storage building, administration building, fire station, garages, dispensary, bachelor officer's quarters, officer's houses, recreation building, radio tower and transmission building, storehouses, an incinerator and a mooring mast (City of Tustin By the need for blimp patrols on coastal waters had diminished. The buildings constructed on the base during were most commonly ancillary structures.
The facility served as anLTAbaseuntil when it was decommissioned as an active facility and designated as an outlying field for military units in the area (City of Tustin In the base was reactivated to support the Korean Conflict. It became the country's first air facility developed solely for helicopter operations. During the time between and when the base was recommissioned, the LTA Ship Hangars were reportedly used as a museum for aircraft and for storage. On September 1, the base was redesignated Marine Corps Air Station (Helicopter), Santa Ana (City of Tustin Even though MCAS Tustin was originally built to support the function of the LT A Ships, it soon became a major center for Marine helicopter aviation on the Pacific Coast.
Its primary purpose was to provide support services and material for the 3rd Marine Aircraft Wing and for other units utilizing the base. MCAS Tustin remained an important installation for helicopter aviation until the when it was targeted for disposal and reuse. In July the base was officially closed. The LTA Ship Hangars were nominated to the National Register of Historic Places by the Marine Corps in October in response to Executive Order of May 13, They were entered into the National Register as a district on April 3, 197 5, due to their historical association with World War II and the fact that they were among the largest wood-supported structures in the world.
The district consists of two discontiguous elements: Element A- LTA Ship Hangar 1 (Building Heating Plant 28A; Mooring Mats 1, 2, 3; Connecting roads between the Hangar and Mooring Mats. Element B - LTA Ship Hangar 2 (Building Heating Plant 29A; Mooring Mats 4, 5; Connecting roads between the Hangar and Mooring Mats. Shortly after this, the base was annexation by the City of Tustin and it became the Marine Corps Air Station (Helicopter), Tustin. The Lighter-Than-Air Era, Modem experimentation with LTA craft began during the first two decades ofthe twentieth century, with prominent work in France, Germany, Great Britain, Italy, and Austria.
Hangars from this period were of multiple types, but were most often lightweight structural steel-including ultra lightweight MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 6 portable hangars-or timber. The pinnacle of success was that of Count von Zeppelin, in Germany. Zeppelin's endeavors included not just the manufacture ofthe dirigibles, but also the first noteworthy hangar design. In both categories, engineer Karl Arnstein developed and perfected the work. Zeppelin showcased Arnstein' s parabolic vaulted dirigible steel hangar, with clamshell doors, in at Dresden, Liegnitz, and Poznan-each location an airfield for DELAG, the Deutsche Luftschiffahrt Aktien Gesellschaft.
DELAG was a subsidiary of Zeppelin, and offered passenger airship service. Lighter-than-air hangar design reached its first pinnacle in the United States during the next decade with Arnstein's work for Zeppelin-Goodyear in Akron, Ohio. There Arnstein designed an internationally noted steel blimp hangar in Best known architecturally were the two reinforced concrete dirigible hangars designed by French engineer Eugene Freyssinet at Orly, near Paris, in (Dean Governments first used airships in a military conflict during in the Italian-Turkish War fought in Libya. During World War I dirigible patrols concentrated on the Atlantic and Mediterranean coasts, and over eastern, German-occupied France. Germany also employed dirigibles for longer-range bombing operations.
The British were noteworthy during the war for realizing the usefulness of the blimp for a counter-German activity, antisubmarine patrol. Each of the Allied powers-France, Italy, Great Britain, and the United States-built lighter-than-air facilities during the war, but those of Germany, particularly the dirigibles and hangars engineered and manufactured by Zeppelin for the German Army, were uniformly assessed as state-of-the-art. After the war ended, the Treaty of Versailles specified the existing German dirigibles and hangars (almost all demountable) as reparations, with Great Britain, France, Italy, and the United States all receiving aircraft and hangars. In Dr.
Karl Arnstein, Zeppelin's chief engineer, came to the United States with a group of 12 other Germans to head research, development, and testing at Goodyear (as Goodyear-Zeppelin) for the United States Navy. During the lighter-than-air craft reached a second pinnacle. Both the United States and Germany made strides in dirigible manufacture and airfields. The United States split its military lighter-than-air responsibilities between the Navy and the Army (although the Navy was to have had full domain), building a station at Moffett Field in California, and adding to that already in place at Lakehurst, New Jersey. Experimental work advanced at Akron, Ohio.
In Germany, Zeppelin continued to develop international dirigible passenger service, with five major steel hangars built during the Zeppelin built the Graf Zeppelin an airship that inaugurated transatlantic flight service. The Hindenburg, an airship over 800 feet long, began flying between Germany and the United States in 193 6, making 10 flights with over passengers before bursting into flame at its American terminus at Lakehurst. Although Great Britain, France, and Italy had all received German lighter-than-air technology after World War I, these countries did not take advantage of it to develop dirigible passenger service or enhanced military capabilities to any great degree (Dean Shock spot.colorado.edu). MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 7 Augmented Submarine Patrol for the United States During World War II As World War II approached for the United States, the Navy requested augmentation ofits dirigible program. Between and only the LTA base at Lakehurst, New Jersey, was active as a military airship installation. The Navy had turned over its base at Moffett Field, California, to the Army Air Corps during the and from through the Army used the facility as a training school. The Navy asked Congress to reestablish a base at Moffett Field, and to add new dirigible bases to supplement that operating at Lakehurst in the vicinity of Boston; southern New Jersey; Cape Hatteras, North Carolina; southern Florida; Los Angeles; San Francisco; and Puget Sound.
Congress approved the Plane Program" in mid-1940, a program that included 48 dirigibles. Only two new installations were under construction before the Japanese attack on Pearl Harbor in December those at South Weymouth, Massachusetts, and at Elizabeth City (Weeksville), North Carolina. The Navy was erecting steel hangars (see below) at these bases when the war formally began for the United States. Increased German submarine activity off the Atlantic Coast mandated a further expansion of the LTA base program, with a revised plan for first 72, then dirigibles, and 10 LTA installations.
With steel shortages and significantly increased wartime needs for the steel available, the Navy changed its blimp hangar construction program from steel to timber, intending approximately two new LTA hangars at each selected location (Shock Picinich As stated in Aviation, the military use of dirigibles made a come-back: "The Battle of the Atlantic, brought within sight of our East coast by Nazi submarines, has inaugurated a renaissance oflighter- than-air craft which advocates ...
have contended through years of struggle: that the airship has a much a place in the air as has the airplane" (Picinich October Non-flammable helium replaced the hydrogen gas used to inflate the blimps of World War I, while the Navy dirigible of the early carried a crew of eight (including two pilots); had space for radio and navigation, a galley, and sleeping quarters; reached speeds of more than 76 miles per hour; could cruise for over miles; and could base at outdoor mooring pads on masts, in addition to hangars. The new K class dirigible held to cubic feet of helium, three times the gas held by the blimps of World War I. The early blimps could take on fuel, supplies, and personnel from ships while at sea.
The K dirigibles could stay under the clouds in low visibility, and patrolled what was called the fathom curve," the stretch of coastal waters where shipping was concentrated and where U-boats were to be expected. The dirigible carried depth bombs and were armed with machine guns (Picinich Goodyear produced the K blimps from its plant in Ohio, with initial delivery in mid-1942. By late in the year the company had a second plant for dirigible manufacture underway in the Southwest. Smaller L ships augmented the patrols of the K craft (Forbes November The K blimps were 246 feet long and about 54 feet wide at maximum inflation, and built at a cost of about each (george.arc.nasa.gov; www.neam.org). MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 8 Construction and Historic Use of the LTA Ship Hangars at Tustin, California Construction for the first of two timber hangars began at the Tustin, California, site in April with a second hangar initiated in early (Shock The installation, built under contract was the fourth in the Navy's sequence of 10-following construction of timber hangars for Lakehurst, New Jersey (two timber); Elizabeth, North Carolina (one steel, one timber); and South Weymouth, Massachusetts (one steel, one timber), respectively (Amirikian 10 August The local contractor for the Tustin work was Barnes Construction Company. Barnes, like other site contractors nationwide, developed its own solutions for erection of the oversized trusses, adapting to the Navy's request for speed and economy of construction.
Barnes chose to use 18 rail flatcars, coupled together in six parallel three-car units beneath its moving false work ( see below), to expedite construction. Although the Southern California LT A base did not set the speed record for hangar completion, its pace was nonetheless noteworthy. The second hangar was finished in just under 200 hours, or about 22 nine-hour days. Those built to the north, at Moffett Field south of San Francisco, did establish the national speed record for construction of the Navy's timber blimp hangar of World War II, at 156 hours ("Timber Arches" ENR 26 August "High Speed" ENR2December Barnes faced difficult site conditions at Tustin.
Not only did the hangars require pile-supported foundations (only five of the Navy's 17 timber blimp hangars, inclusive of the pair in Southern California, required this), but very high winds made construction of the first hangar especially problematic. Santa Ana winds at 85 miles per hour, with higher gusts, destroyed the partially erected first hangar twice, in late January and mid-February (Shock "Winds Wreck" ENR 25 February ). The situation meant that construction speed was paramount, not just to achieve the Navy's goals, but to erect a sufficiently massive structure that would not be blown down before it had acquired stability to counteract the windy conditions.
Completion of the first hangar was further slowed by an aircraft accident in late November A fighter crashed into the unfinished hangar, killing the pilot and embedding the remains of the aircraft in the recently poured concrete of one of the doorway bents. Barnes could not remove the wreckage from the hangar, and so encased it when repairing the bent. The Navy activated the LT A base at Tustin at the outset of October well before Barnes completed construction ofits two blimp hangars. The station maintained 12 blimps, after first receiving an interim L-8 from Moffett Field in October. The Airship Patrol Squadron operating at Tustin was the (Zeppelin Patrol Tustin maintained auxiliary detachments at Lompoc (north) and Del Mar (south), California, and at Ensenada, Baja California (Mexico).
During the war, the hangars at Tustin suffered from flooding (hangar number two) and fire (hangar number one), each situation requiring minor repairs. Proximity to Hollywood made the Tustin LTA base and its auxiliary detachment at Del Mar the selected sites for the filming of This Man's Navy, the single dirigible movie of World War II (Shock In the Navy disestablished the Tustin LTA installation. The base operated as a local airfield, museum, and storage facility (for the Flying Red Horse Mobil blimp and for Goodyear) from MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 9 through In the Marines took over the base, establishing it as an air station for helicopter squadrons testing the vertical assault concept.
The next year the Navy returned to the installation with the assignment ofZP-951, a reserve squadron. prepared a blimp for sacrificial use in an atomic bomb test, "Plumbob," at the Nevada Proving Ground near Las Vegas. Through the 195 Os, the Navy reserves continued to erect and prepare blimps on site. For a period of a few months in early the Navy again returned to Tustin to prepare a blimp for an anti-submarine research- and-development, "Clinker." During the next decade, the Tustin hangars served as the staging ground for Malcolm Forbes' attempt to cross the United States and the Atlantic in a balloon, and were prominent in another Hollywood film, The Hindenburg.
Hollywood used the Tustin blimp hangars not only to represent the World War I hangar at Lakehurst, but also to portray dirigible hangars in Germany of the In late the Marines redesignated the Tustin LTA base exclusively for helicopters. With defense reduction following the end of the Cold War, the Marines began the process of turning the base over to the City of Tustin (Shock The base was officially closed in July and is currently in the process of being transferred.
Architectural Information
Engineering for the Modern Lighter-Than-Air (LTA) Hangar Engineering and design for the modem American LTA hangar derives from the work of three prominent German-trained engineers. Development of the first modem, steel dirigible hangar, that for Goodyear erected in Akron, Ohio, of was the work of Dr. Karl Amstein. Amstein was born in Prague in and was educated in universities there. From through he assisted Dr. Joseph Melan, internationally renowned engineer, in bridge design and stress analysis in Switzerland. During the next few years he worked as chief engineer for a firm in Strasbourg, inclusive of a project to reconstruct the tower foundation pillars beneath Strasbourg Cathedral. Between and Dr.
Amstein worked for Count von Zeppelin atLuftschiffbau-Zeppelin in the design and engineering of aluminum dirigibles. During World War I, Zeppelin manufactured airships for the German military. At the close of the war, the Allies received the Zeppelin dirigibles, sharing them as spoils of the conflict. The United States government brought Dr. Amstein to the United States as the head of a group of 12 German engineers in to lead the advancement and manufacture of dirigibles for Goodyear-Zeppelin, a subsidiary of Goodyear Tire and Rubber Company.
The situation has been described as identical to that of the German rocket scientists and other engineers, brought by capture, surrender, and recruitment to America following World War II (Dean The Goodyear-Zeppelin enterprise for airships in Akron, Ohio, was at the explicit request of the United States Navy Bureau of Aeronautics. For the Akron operation, Dr. Amstein designed the 1175-foot long steel blimp hangar constructed there in (www.uakron.edu). The Amstein steel LTA hangar served as the direct model for the prototype steel hangar project developed for the Navy in by Anton Tedesko of the Chicago engineering firm, Roberts & MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 10 Schaefer ("Lighter-Than-Air Dock" Tedesko Archives).
Tedesko, too, was of Germanic background. Viennese by birth Dr. Tedesko worked for the Wiesbaden engineering firm Dykerhoff & Widmann during the later immigrating to the United States in Tedesko followed engineer John Kalinka, also ofDykerhoff & Widmann, to Chicago under an agreement between the German firm and Roberts & Schaefer to distribute ZD construction technology. ZD (Zeiss DyWiD AG: Zeiss Dykerhoff Widmann A.G.) construction was an ultra thin-shell reinforced concrete technology patented in Germany. ZD became the technology of choice for the United States Navy in when it adopted the construction through Tedesko for its sea patrol hangars in San Diego and on the East Coast.
The German Luftwaffe also commissioned ZD hangars during the 193 Os and early After World War II, Strategic Air Command hired Roberts & Schaefer (Tedesko) to design its first maintenance hangar for the (in and the Navy again had the firm handle a new hangar program for its reserves training at multiple bases in the early Tedesko proposed a thin-shell concrete blimp hangar for National Airport in Washington, D. C., at an unknown date (but likely in with drawings for the structure extant today ("Lighter-Than-Air Dock" Anton Tedesko Archives Princeton University).
Between to Tedesko served as a direct scientific advisor to the United States Air Force (Weitze The timber LTA hangar commissioned by the Navy at 17 locations during and directly derived in its basic form from both the Arnstein and Tedesko hangars, was the design of Armenian engineer Arsham Amirikian. Amirikian was born in educated in Constantinople, France, the United States, and Germany. He immigrated to the United States in the early working first for a series of steel fabrication shops. In he became an assistant structural engineer with the Navy Bureau of Yards and Docks in Washington, D. C.
By the time of the timber blimp hangar, Amirikian had risen to the position of chief engineer with the Navy, and authored Rigid Frames in His primary areas of expertise were welded steel and precast concrete structures. He shared a professional interest in thin-shell concrete structures with Anton Tedesko, and indeed, Tedesko and Amirikian received their degrees later in their careers at the same Austrian university, the Institute of Technology in Vienna. Dr.
Amirikian designed the timber version of the Navy's dirigible hangar in a building that Engineering News-Record appraised along with Tedesko's thin-shell concrete hangars and storage depots; glue-laminated wood arch hangars; and Albert Kahn's steel- frame aircraft plants as one of the most outstanding structural achievements of World War II, noting that "significant buildings ... resulted from the extensive use of relatively unfamiliar materials and the use of old materials in new ways" ("These War Buildings" ENR 19 October Peltier The recipient of multiple engineering awards during his career, Dr.
Amirikian was fluent in seven languages; published over a 100 articles; and authored Basic Structural Engineering in and The Influence of the Art of Welding on the Creative Concepts of Structural Design in (Peltier His 300-foot welded steel arch hangar of for the Navy at Patuxent was closely tied to similar work of Tedesko this same year at Idlewild Airport in New York (Amirikian 26 January During the early Cold War, Amirikian was especially prominent in engineering circles for his examination of nuclear blast-proof reinforced concrete construction (Amirikian November MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 11 Amirikian March Amirikian August "How to Design" ENR 15 April The Architecture of the LTA Ship Hangars The key character-defining features of the Navy timber blimp hangar of inclusive of its distinctive site characteristics, are: its catenary form; its nearly all-timber, partially prefabricated and fire-proofed, construction; its individual timber arches; the timber X- and K-bracing; steel ring timber connectors; the reinforced concrete A frame system supporting the arches; the reinforced concrete bents devised for the end doors; the vertical, rolling segmental and orange peel (in one instance) timber doors; the foundation system (of two distinct types); the parallel, or perpendicular, placement of the hangars at the landing mat; the 2000-foot, circular landing mat; and, clusters of smaller, circular mooring pads.
At individual locations, associated original ancillary structures also contribute to the hangars' portrayal of historic time and place. The two LTA Ship Hangars extant at the former Marine Corps Air Station in Tustin, California, are part of a small group of seven similar blimp hangars built in the United States during World War II that remain intact at their original sites as of Erected from timber, the hangars are of standardized Navy design. At the time of their completion in and the hangars were the largest wood-frame structures in the world. The Navy first planned for all-steel blimp hangars, following Congressional approval of a non-rigid airship program in mid-1940.
During two of these steel hangars were in construction in Massachusetts (one) and North Carolina (one) ("Dirigible Base" ENR 14 August "Dirigible Base" ENR 7 August The steel hangar program was aborted after the United States formally entered the war at the close of the year. Three additional steel blimp hangars, planned for New Jersey (Cape May), Northern California (San Francisco), and Washington (Puget Sound), went unbuilt. Due to steel shortages and an increased need for the blimp hangar program, the Navy revised its plans in increasing the total number of anticipated new hangars from five (three on the East Coast, and two on the West), to 21 (two steel hangars on the East Coast; 19 planned timber hangars [nine on the East Coast; four on the Gulf Coast; and six on the West Coast).
The final number of blimp hangars built during was 19, inclusive of the two original steel MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 12 hangars and 17 additional timber hangars-although the total number of closely similar blimp hangars in the United States was 21, inclusive of two steel hangars built in Akron, Ohio (Goodyear, and, Moffett Field, California (Army, Three of the four modern-era steel lighter-than-air hangars are extant today, making the composite group of steel and timber blimp hangars ofthe period 10: of these structures, six remain on the West Coast, three on the East Coast, and one in Ohio.
The West Coast hangars are located in California and Oregon: three at Moffett Field (one steel and two timber); two at Tustin; and one at Tillamook. Those in the East are concentrated at Lakehurst, New Jersey (two timber), with a steel hangar remaining at Weeksville, North Carolina (Shock Size of the modern steel and timber blimp hangars built in the United States ranged from about 960 feet long, 328 feet wide, 190 feet high (the steel hangars of to feet long, 325 feet wide, 180 high (the steel Goodyear hangar in Akron of [given as exterior dimensions]. The Moffett Field steel hangar of was very similar in its dimensions to that in Ohio.
When the building program for the lighter-than-air hangars changed from one in steel to one in wood, standardized dimensions for the 17 timber hangars became feet long feet, interior), 297 feet wide feet, interior), 183 feet high feet, interior). These measurements are somewhat misleading, as the intended dimensions for the final steel hangars had closely followed those of the Akron and Moffett Field structures ("Blimp Hangars" ENR 17 December 1942;www.elizcity.com), but achieved an interior clear span of between 259 and 289 feet (Shock The actual achievement in timber also related to clear span (23 5 feet), not overall exterior width. The hangar's arches made possible its clear span, with those of the timber blimp hangars at 246 feet.
Prior to the Navy's timber blimp hangar program of World War II, the longest timber arches built were those for exposition buildings at the world's fair held on Treasure Island near San Francisco ("Blimp Hangars" ENR 22 October The first two steel blimp hangars resulting from the buildup beginning in a pair at Lakehurst, were an anomaly and were not really a part of the overall group.
These structures were training and overhaul hangars, and were of significantly different design: they were only 414 and 614 feet long, 217 feet wide, 118 feet high, and although extant today, are not discussed here (Shock The Navy's LTA ship hangars served the traditional purpose of housing the blimps; providing the aircraft with appropriate shelter and mooring before launch; and accommodating refueling, maintenance, and repair. During the early twentieth century Germany's first LTA hangars were :floating sheds, built on Lake Constance at a site selected by von Zeppelin. The sheds rotated on their anchorage points, allowing the blimps to launch and land appropriate to the prevailing winds.
Immediate improvements in the LTA hangar included rotation for fixed blimp hangars by By World War II, engineers completely understood the requirement to erect LTA hangars with their longitudinal axis (length) coincident with the direction of the local winds during flying weather. Blimps headed into the wind when landing; the ships launched with the wind at their tails. The primary purpose of the blimp hangars of then, was to provide the needed shelter from MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 13 excess wind for the operational patrol ships based at each location, and to enhance the probability of a successful launch.
(The steel blimp hangar built in at Moffett Field was actually used as a full- scale construction hangar during the war. Between October and January the Navy built about 40 blimps in this structure.) The hangars also served as traditional aircraft docks in which routine maintenance and repair occurred. Cables secured inflated blimps to eye bolts in the concrete flooring, with ships also moored to vertical masts. As was also true for canvas nose, wing, and engine aircraft docks of World War II, the blimp hangars featured steel work platforms-in this instance, catwalks along both sides of the interior space, connected to stairs at both ends of the hangars and to an additional centrally placed stair. Stairs ran from floor to catwalk to ceiling.
Steel ladders, and overhead monorails with 2.5-ton trolleys, gave maintenance and refueling crews the required access to the blimps. Following the conclusion ofWorld War II, many of the LTA hangars became storage for both inflated and deflated blimps; other aircraft; and military motor vehicles (Dean Shock Although the timber hangar program was highly uniform in its buildout, it nonetheless did sustain a limited number of design and site adaptations. As originally developed, the steel hangars closely followed the design of engineer Karl Arnstein for the Goodyear hangar in Akron (www.uakron.edu). The steel hangars also referenced a prototype dirigible hangar project for the Navy at Lakehurst completed by Anton Tedesko ofRoberts & Schaefer ("Lighter-Than-Air Dock" Tedesko Archives).
The hangars were of all-welded construction, and had a framework of two-hinged arch truss ribs on pinned shoes-tied together by steel rods beneath the concrete flooring of the structures ("Blimp Hangars" ENR l 7December The steel hangars ofl941 at South Weymouth, Massachusetts, and Weeksville, North Carolina-like those of Akron and Moffett Field, each featured "orange peel" (also known as "clamshell") doors that fully moved away from the ends of the hangars on railroad tracks when opening and closing. Replacement of the orange peel door was the first major modification to the blimp hangar as the design program changed from steel to wood.
The timber blimp hangars, designed by the Navy's chief engineer at the Bureau of Yards and Docks in Washington, Arsham Amirikian, are catenary arch-shaped structures, also described as "eggshell" in their basic form ("Blimp Hangars" ENR 22 October Amirikian October Each hangar measures feet in length, 297 feet in width, 178 feetto the roof, and another 11 feet to the top ofthe wind indicators. Timber arches are set on 20-foot centers. The hangar floor consists of several unreinforced concrete slabs approximately 5 inches thick. Each slab is approximately 400 square feet and was poured in a checkerboard pattern. The overall floor area is approximately square feet.
Timber struts and X-braces (in the plane of the bottom chord) tie the structure together, along with timber purlins and K-braces (in the plane of the top chord). Purlins are three by 14 inches in size, supporting timber rafters of three by 12-inch dimensions. Two-inch, tongue-and-groove wood planking sheathes the roof, running longitudinally. Amirikian used structural steel only in the vertical MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 14 doors. An all-welded box-truss 120 feet high, 33 feet wide, and three feet thick, defines each door leaf ("Blimp Hangars" ENR 22 October Timber arch members and other components were precut, "bored, grooved, dapped and beveled" and made fire resistant off site-in almost all cases.
Timber Structures, Inc., of Portland, Oregon, fabricated the lumber components, also marking each structural piece with letters and numbers indicative of positioning in the arch and brace system for the hangar. The company milled the lumber at or just above 25% moisture context, with the intent that hangar erection occur before the lumber dried out. Although Timber Structures, Inc., stockpiled its fabricated hangar components for ease of shipment nationwide, it was impregnated with salt en route and this helped keep the moisture high and prevented any significant component shrinkage before construction ("Timber Arches" ENR 26 August Timber Engineering Company. ENR 23 September "High Speed" ENR 2 December Timber Structures, Inc.
had geared up for wartime production in late with a new plant completed in Portland in autumn that year ("Portland Plant" ENR 6 November ). The company shipped the Navy blimp hangar components in specially heated railroad cars to the individual Navy construction sites where they were preassembled as "jigs"-finished sections-in a graded yard on layout tables. The tables were marked so that the lettered and numbered precut components could be set to correspond to their actual place in the erected arch. In this manner, the Navy completely eliminated the traditional need for field drawings.
The process was one simultaneously in use for federal housing projects ofthe wartime period (Shock "Two Traveling Tower Derricks" ENR 22 April "High Speed" ENR 2 December "Houses Built" ENR 22 May During late the Navy ran a series of tests against the salt-impregnated lumber to ascertain sustained wood fiber strength: strength generally declined from 3% to with the exception of end and radial strengths-which increased by up to 25% from the treatment (Amirikian November Amirikian addressed the problem of arch design primarily through predicted wind loads, although he considered earthquake parameters (atone-tenth of gravity loading) and snow loads (20 to 40 pounds per square foot) in certain localities.
The wind load design parameters had chiefly been worked out by Arnstein for the Akron hangar, with small-scale models tested in wind tunnels during the late ("Blimp Hangars" ENR 22 October Wind load issues for the hangars were especially sensitive in the nearly uniformly high-wind coastal areas where the hangars were sited.
Amirikian noted in Civil Engineering that during erection of the hangars "velocities of approximately 60, 70, and 90 miles per hour [were] recorded at three stations" (Amirikian November Construction went extremely slowly for the two hangars at Tillamook, Oregon, due to periodic winter winds of over 100 miles per hour; one of the two hangars at Tustin, California, sustained damage from Santa Ana winds during construction in the single hangar at Hitchcock, Texas, also suffered hurricane damage during construction in and catastrophic damage from Hurricane Carla in the single timber hangar at Weeksville, North Carolina, survived hurricanes during both and requiring substantial repair; the three hangars at Richmond, Florida, all failed simultaneously during a hurricane, with a major fire destroying the site; the pair of hangars at MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 15 Glynco, Georgia, suffered from severe hurricane damage in (after which those hangars were demolished on site) ("Winds Wreck" ENR 25 February Shock The 325-foot arch span featured in the steel hangars of could not be duplicated in timber, but Amirikian increased the effective width of the redesigned blimp hangar by setting the timber arches on 25-foot reinforced concrete A frames. The A frames are closed rigid-frame structures designed with a vertical interior leg, a battered outside leg (continuing the top chord of the timber arch), top and bottom struts, and longitudinal tie beams-with all components of the frame constructed in reinforced concrete.
The A frames also created lean-to spaces down the sides of the timber hangar (below and between the frames) for shops and offices.
As planned industrial shops lined one side of the hangar (machine, welding, metal, fabric and parachute, dope and paint shops; with tool and stock storage; and a helium exhauster equipment room and parachute well), while additional shops and offices lined the other (battery, hangar gear, instrument, radio, electric, riggers and engineers, ordnance, and operations shops; riggers and engineers staging rooms; a photographic darkroom; a bunk room; lockers; a flight gear issue room; a conference room; and individual offices for the ship officers, squadron officer, squadron executive officer, and squadron commander) (Amirikian 10 August The oversized timber arch hangar set on concrete A frames required equally massive scaffolding during hangar construction-scaffolding approximately the size of a 14-story building (www.elink.net).
Speed and economy were sought at all locations, with occasions where two different contractors handled the erection of adjacent hangars simultaneously. This was the single aspect of the Navy's World War II blimp hangar program that was not standardized: the individual contractors decided on their methods and equipment (Amirikian November Each contractor typically employed some type of "traveler," a large device that moved along on tracks or rollers, and supported the preassembled arches as workers mounted them in place.
For the first hangars, at Lakehurst, New Jersey, the Phoenix Bridge Company employed two 145-foot high derrick towers with 75-foot booms, with each tower mounted on four rail trucks and moved along tracks laid 33 feet apart center to center ("Two Traveling Tower Derricks" ENR 22 April For the blimp hangar at South Weymouth, Massachusetts, and those built afterwards, site contractors devised true travelers. Most often they used some type of railroad car (either gondola or flatcar) to support and move the false work. For the hangars at Tustin, the traveler consisted of a timber scaffold mounted on 18 rail flatcars, each 40 feet long and coupled together in six three-car trains.
Men worked in nine-hour shifts, moving the scaffolding two or three times daily, with each movement accomplished as the timberwork for a 20-foot hangar bay was completed. Moving time at Tustin to set up for the next bay was about seven minutes on calm days ("Timber Arches" ENR 26 August Alternately, at Houma, Louisiana, the traveler moved on hardwood rollers set perpendicular across hardwood timbers. Contractors laid the timbers on a bed of seashell to distribute the dead loads present during construction as widely as possible. For this site, movement was manual-with a boss" establishing regularity. The teams of men advanced the scaffold 20 feet in 30 minutes ("Two Timber MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 16 Blimp Docks" ENR 23 September The construction crew at Moffett Field set the speed and economy record for erection of the timber blimp hangars: that team moved their traveler three times in a 10-hour shift, erecting one of the two hangars there in 156 hours. Each move covered 40 linear feet in three minutes; steam engines mounted on flatcars were incorporated into the base of the traveler ("High Speed" ENR 2 December Each of the 17 timber blimp hangars built contained about three million board-feet ofwood, of which board-feet were in the arches-and each required careful assessment of site conditions for hangar foundations. The individual arches rise 140 feet from base to centeriine, with a depth of 19 feet at the base tapering to 13. 64 feet at the crown.
Each hangar featured 50 bays (51 arch frames) ("Blimp Hangar" ENR 11 March Chord members and arch diagonals vary in thickness from two to four inches, with a depth of eight to 14 inches, and are comprised of two-piece sections. Chords are two panels long, about 12 feet per panel in the upper chords and feet per panel in the lower chords. Change in the arch curvature occurs at alternating panels. Struts are single pieces, varying from four to eight inches in the upper arches to six by 14 inches at the base. Splices are lapped.
Some joints required assemblies of seven overlapping thicknesses ("Blimp Hangars" ENR 22 October After about two months of elapsed time following the completion of the hangars, a crew of riggers climbed up into the timber arches and manually tightened all of the bolts that loosened as the timber dried (shrank). "There was considerable take-up; on many of the bolts two turns were required to tighten the nut" ("High Speed" ENR 2 December Each location also necessitated careful considerations for hangar foundations. Soil conditions varied from firm sand overlying rock near to the surface, to deep muddy silt. Soil samples, load bearing tests, and pile tests determined whether the hangar could be built with a spread-foot concrete foundation or whether a pile-supported footing was required.
One timber hangar, at Richmond, Florida, employed below- grade continuous concrete beams along its outer wall, but settled severely nonetheless-necessitating post-construction soil grouting at the site. Hangars requiring pile-supported foundations were those at Richmond, Florida (two of the three hangars); Houma, Louisiana; and, Tustin, California. Remarkably, only the hangar at Houma incorporated the wood orange peel door-the door intended for pile-supported hangars (Amirikian November Shock An innovation of the Navy's timber blimp hangar was the steel ring timber connector manufactured as the Teco Connector System and distributed through the Timber Engineering Company of Washington, D. C.
The steel ring connector explicitly allowed the partial prefabrication oflarge wood trusses, and had first been tried in early for the 13 0-foot timber trusses fabricated for the Oregon Shipbuilding Corporation. By late the Teco Connector System had made several other major appearances in West Coast structures, including a Beech Aircraft plant and a carton factory for the California Container Corporation (Timber Engineering Company ENR 5 June "Speed and Economy" ENR 9 October Timber Engineering Company ENR 6 November Timber Engineering Company ENR 8 April The ring connector was a necessary feature that increased the strength of the timber joints by spreading the load more equally over the cross-section MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 17 of the wood: a steel ring perpendicular to a steel pin was embedded in one of the boards, with the pin bolted through the two spliced layers. The steel ring connector made the huge size of the Navy blimp hangar possible in wood. The Timber Engineering Company initiated its major marketing campaign in September with distributors nationwide. The Navy reconceived its hangar program just after the Pearl Harbor attack in December, with redesign in wood in August (Amirikian October Timber Engineering Company ENR 25 September ). Timber was of two types nationwide: Douglas fir was the preferred material, cut and shipped from the West Coast. With the erection of the Weeksville, North Carolina, hangar, the Navy approved an alternate timber, Southern white pine.
(Atypically, the local contractor fabricated the hangar sections for the Weeksville hangar on site) (Shock Lumber was of two grades (one grade for the chords and webbing; one for the remainder ofthe framing) (Amirikian October All timber was chemically treated for fire-resistance (inclusive of possible incendiary bombing) through vacuum pressure, ammonium and boron salt impregnation, carried out while in rail transit to the construction sites (Amirikian November "Timber Arches" ENR 26 April "Two Timber Blimp Docks ENR23 September Shock Protexal Corporation, ofKenilworth, New Jersey, provided the wood preservative (Protexal CorporationENR 28 October The fireproofed timber was tested to withstand a 45-minute exposure to gas flames of degrees (at 15 minutes), degrees (at 30 minutes), and degrees (at 45 minutes).
The treated wood charred at these temperatures and intervals, but did not bum ("Two Traveling Tower Derricks" ENR 22 April Resistance to fire, however, continued to be a major problem. Over time fires destroyed about 30% of the Navy's World War II timber blimp hangars, including ones at Richmond, Florida, in (three hangars); one of the two hangars at Tillamook, Oregon, in the single timber hangar at Weeksville, North Carolina, in (Shock At Tustin, after the facility transferred from the Navy to the Marines at the outset of the the military added a comprehensive aluminum-and- copper lightening rod system for the roofs of the two blimp hangars there.
The Marines added sixteen-inch aluminum rods on swivel bases in a double line along the longitudinal apex of the hangars, spaced a little over 30 feet apart. Two additional longitudinal rows of rods paralleled both sides of the apex, with double rows also placed atop both concrete door bents. Aluminum cabling connected rods to multiple aluminum-to-copper transfer couplings at the ground (Hodgdon & Ellerbroek 20 September Doors for the majority of the timber blimp hangars were vertical, flat-leaf sliding doors (six leaves) supported by massive reinforced concrete bents.
The bents ( door frames) were designed to be essentially free-standing so that additional dead and wind load pressures did not accrue along the weaker, longitudinal direction ofthe hangar frame ("Erecting Box Girders" ENR 16 December ). Side towers of the bents stand 147 feet high, with cross section of 12 by 17 feet at the base tapering to 12 by 12 feet at the top. A concrete box girder spans the side towers, a little under 22 feet square in cross section. Door-opening clearance was 120 feet high by 220 feet wide, with individual leaves feet wide and varying in thickness from 3 .5 feet to a little over five feet. Each door leaf weighed MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 18 between 26 and 39 tons, dependent on framing and prerequisites of individual hangar sites. Doors operated by motorized cables, opening and closing in under two minutes. (Amirikian October The Truscon Steel Company ofYoungstown, Ohio, manufactured the 12-story high steel door panels for Byrne Doors Incorporated of Detroit. Byrne had been building hangar doors for the U.S.
military since the late (Truscon Steel Company ENR 6 May Byrne Doors Incorporated ENR 12 August The orange peel door was built once, however, at Houma, Louisiana (no longer extant), where soil conditions were extremely poor for the heavy concentrated loads of the concrete side towers (Shock Cappel December Amirikian October Configuration of the Navy's blimp hangar sites, first known as "dirigible bases," varied across the country, although the Navy planned for pairs of hangars at almost all locations. Lakehurst, New Jersey, the foremost blimp hangar base in the country (and possibly, internationally), was the single exception. Lakehurst had housed dirigibles since and at the outset of World War II was one of two lighter-than-air military installations in the United States.
(The Army operated a second such base at Moffett Field in California from the forward.) Lakehurst had two World War I hangars on site at the beginning of the Navy's World War II lighter-than-air expansion program, becoming the location for two additional, small blimp hangars (steel) in With the revised timber blimp hangar program oflate Lakehurst received yet another two lighter-than-air hangars, making its total six. All other Navy blimp bases, however, featured a pair of hangars-with the exception of the Richmond, Florida, installation, for which the Navy built three on site.
Patterns included a pair of hangars side by side (Lakehurst; Moffett); perpendicular to one another (South Weymouth; Glynco; Tustin; Tillamook; Weeksville); and, side by side and perpendicular to one another (Richmond-three hangars). (The Navy planned that both Houma, Louisiana, and Hitchcock, Texas, received a pair of hangars; these locations were lower priorities, and at buildout only received one hangar each.) The total number of lighter-than-air World War II Navy installations in the United States was 10. The paired hangars typically faced a circular landing mat about feet in diameter, with those in the perpendicular configuration across the mat from one another.
In most cases, the mat was a crisp geometric form on the landscape, although at Glynco, Georgia; Houma, Louisiana; and Hitchcock, Texas, additional semi-circular mooring pads at the circle's outer edge obscured the shape of the landing mat itself At South Weymouth, Massachusetts; Moffett Field, California; and, Tillamook, Oregon, more traditional runways delineated the site. At all locations, smaller circular mooring pads augmented the bases, each originally equipped with mobile mooring masts. As planned in the first Navy program ofmid-1940 (for the steel hangars), each lighter-than-air installation was to have one hangar (for six dirigibles), barracks for 228 men, helium storage and service, a power station, the circular landing mat, and the mooring pads.
Typically, the augmented Navy program of accommodated 12 dirigibles, with 700 enlisted men and 150 officers on base. During the a number of the lighter-than-air bases added helicopters on site (www.elizcity.com). At Tustin, the installation layout was particularly programmatic, with the two perpendicular blimp hangars sited MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 19 across the 2000-foot landing mat from one another; six smaller, circular landing pads arranged in two groups ofthree behind each ofthe hangars; and an adjacent, contained cantonment area (Shock "Map ofNaval Air Station" 30 June Description of Helium tank buildings (Buildings 28A and 29A) Currently used for storage, these buildings originally housed the helium purification system, including helium tanks and apparatus, that provided the airships with the substance necessary to obtain flight. The helium was piped from these structures to the adjacent hangar. They were built in Each building is a one story, 941 square foot concrete structure with a concrete slab on grade, flat roof, and attached concrete chimney.
The buildings measure approximately 30 feet long, by 30 feet wide, by 30 feet high. They sit on a concrete slab foundation and are constructed of concrete which has been painted in pale yellow. The chimneys are approximately 46 feet tall and measure approximately 6 by 6 feet. Metal ladder rungs are placed on the outside of the buildings leading to the top of the chimneys. There is an opening in the chimneys to both the interior ofthe building and to the exterior. They are constructed of a concrete exterior and a single course of brick on the interior. The four windows in each building are steel sash with 4/6 lights. There are security grilles over the windows ofBuilding 28A.
Two 12- foot metal roll doors are located on the side nearest to the hangar (the east facade of Building 28A and the south facade of Building 29A). Building 28A has a concrete ramp leading up to these metal doors and an overhang above the doors. Both buildings have a single wooden hinged door (the south side of Building 28A and the west side of Building 29A). Building 28A has a wooden shelf mounted just below the two windows on the northern side of the building. It also shows evidence of two patched square holes (roughly shaped like a 6 by 6 inch wooden beam) approximately 2/3 of the way up the western side of the building. Building 29A has a small diameter hole in both the west and east side of the building.
Description of Mooring Mats 1-5 Mooring Mats 1-3 lie to the northeast of the northern LTA Ship Hangar (Building They are arranged in a cloverleaf pattern and were originally used to temporarily moor the blimps. Mooring Mats 4 and 5 are situated east of the southern LTA Ship Hangar (Building Mooring Mat 6 was has been demolished. All five mats are concrete, circular constructions measuring approximately 600 feet in diameter. Integrity of the LTA Ship Hangars and Ancillary Structures Several items relating to the LTA Ship Hangars have been removed.
These include the original helium pipework linking each hangar to its helium tank building, and a sixth mooring mat that used to exist to the south of the southernmost LTA Ship Hangar (Building The original roofing of the LTA Ship Hangars has also been altered. The original roofing was built-up membrane but the MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 20 roofs were recovered in using composition felt under corrugated aluminum panels (City of Tustin Corrugated fiberglass panels also replaced the original skylights at this time. In the fuel oil heating system was converted to natural gas.
From to bolt tightening and truss repairs were made to the LTA Ship Hangars (City of Tustin This included major repairs to correct instability caused by buckled truss frame chords in both hangars. It also included many minor repairs such as clamping split wood, re-nailing purlin braces, and replacing t-strut webs in certain areas. In the offices and shop areas were remodeled (City of Tustin This included re-roofing, rewiring the telephone system, new lighting, bringing the internal electrical panels up to code, window and door replacement, and a complete remodel of the interiors of the offices. Also in a polyurethane foam roofing was applied to the monitor and top of the hangar barrel roofs.
In Don Neal, ofNeal Engineering, inspected the roof trusses and roofing (City of Tustin He identified 101 major repairs on the northernmost LTA Ship Hangar (Building 28) and 71 repairs on the second LTA Ship Hangar (Building These repairs were completed in Steel stairs were built in to replace portions of the wooden stairs leading to the catwalk in the southern LTA Ship Hangar (Building 29) (City of Tustin The weight of the steel caused the supporting t-struts to buckle. The last repairs to the LTA Ship Hangars appears to have occurred in when the hangar doors were upgraded (City of Tustin This included replacing the door motors, electric brakes, conduit, flexible cable, sub-panels, weather stripping and the in-ground rails (including their concrete runways).
Two years later, the underground fuel oil storage tanks were removed. ID.
Sources
Roesling Nakamura Architects, Inc. Master Plan, MCAS Tustin. Prepared for the Western Division, Naval Facilities Engineering Command, City of Tustin. MCAS Tustin Historic Resources Survey (draft). Prepared by Thirtieth Street Architects for the City of Tustin, City of Tustin. Historic Blimp Hangars Analysis: Specific Plan/Reuse Plan and Base Disposal of Marine Corps Air Station (MCAS) Tustin. Prepared by Howard Needles Tammen and Bergendoff Leighton and Associates.1994 City of Tustin. Draft Environmental Impact Statement/Environmental Impact Report for the Disposal and Reuse ofMCAS Tustin. Prepared for the City of Tustin and Department of the Navy, MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN ) HABS NO.
CA-2707 Page 21 Published Sources Books Dean, Christopher (ed.). Housing the Airship. London: The Architectural Association, Peltier, Eugene J. "Arsham Amirikian." National Academy of Engineering of the United States of America Memorial Tributes. Volume 5. Washington, National Academy Press, Shock, James R. American Airship Bases & Facilities. Edgewater, Florida: Atlantis Productions, Periodicals Amirikian, Arsham. "Can We Design for Atomic Blasts?" Civil Engineering 20 (November Amirikian, Arsham. "Navy Builds Welded Arch Hangar." Engineering News-Record (ENR) 144 (26 January Amirikian, Arsham. "Navy Develops All-Timber Blimp Hangar. Part II. Unprecedented Design Problems Encountered." Civil Engineering 13 (October Amirikian, Arsham. "Navy Develops All-Timber Blimp Hangar. Part II.
Construction Procedure." Civil Engineering 13 (November Amirikian, Arsham. "Precast Concrete Offers Protection Against Atomic Blast." Journal of the American Concrete Institute 22 (March Amirikian, Arsham. "Promising Future Predicted for Precast Thin-Shell Construction." Civil Engineering 23 (August "Blimp Hangar ofFire-Resistant Wood." ENR 130 (11 March 85. "Blimp Hangars Built by Contrasting Methods." ENR 129 (17 December "Blimp Hangars Set New Timber Arch Record." ENR 129 (22 October Byrne Doors Incorporated. Harbor with Doors by Byrne." ENR 131 (12 August two- page advertisement. MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO.
CA-2707 Page 22 Cappel, "Timber Hangar Erected from 16-Story Scaffold." Civil Engineering 14 (December "Dirigible Base, Elizabeth City, ENR News Issue (7 August 12. "Dirigible Base, South Weymouth, Mass." ENR 127 (14 August 56. "Erecting Box Girders of Span to Carry Doors of Navy Blimp Docks." ENR 131 (16 December Forbes, Ester H. "Guardians of the Convoys." Aviation 42 (November "High Speed Timber Blimp Dock Erection." ENR 131 (2 December "Houses Built in Jig-Time." ENR 126 (22 May "How to Design for H-Blast Fringe Areas." ENR 152 (15 April Picinich, Jr. "Blimps Return to the War." Aviation 42 (October "Portland Plant Built for Prefabrication of Timber Materials." ENR 127 (6 November 59. Protexol Corporation.
"The Biggest Fire Trap Ever Built-Only It Will Never Bum." ENR 131 (28 October advertisement. "Speed and Economy Were Demanded." ENR 127 (9 October "These War Buildings Were Significant." ENR 133 (19 October "Timber Arches for Blimp Dock Erected from Scaffold on Flatcars." ENR 131 (26 August [Discusses construction for the hangar at Tustin.] Timber Engineering Company. "Beech Aircraft Plant. 8 Acres of Timber Trusses in 60 Days." ENR 127 (6 November Timber Engineering Company. "Engineering m Wood." ENR 131 (23 September advertisement. Timber Engineering Company. "Our Navy Builds World's Greatest Timber Structure." ENR 130 (8 April MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 23 Timber Engineering Company.
"Teco Timber Connectors." ENR 127 (25 September Timber Engineering Company. "Timber Does It Again." ENR 126 (5 June Truscon Steel Company. "Steel Doors-12 Stories High." ENR 130 (6 May advertisement. "Two Timber Blimp Docks Erected With Traveling Timber Scaffolds." ENR 131 (23 September "Two Traveling Tower Derricks Erect Huge Timber Blimp Hangar." ENR 130 (22 April 62- 66. "Winds Wreck Wood Arches of Partly Erected Hangar." ENR 130 (25 February 32. [Discusses construction problems at Tustin.] Government Documents Kuci, R.A., Colonel. Commanding Officer, Marine Corps Air Station (Helicopter). "Lighter-than-Air Hangars." National Register of Historic Places nomination form. 1 October Weitze, Karen J. Cold War Infrastructure for Strategic Air Command: The Bomber Mission.
Sacramento, California: KEA Environmental, Inc., for Air Combat Command, November Drawings Amirikian, Arsham. [United States Navy, Bureau of Yards and Docks.] "Standard Lighter Than Air Hangar Wood Construction." 10 August Marked for contract #s: [Lakehurst, New Jersey]; [Elizabeth, North Carolina]; [South Weymouth, Massachusetts]; [SantaAna(Tustin), California]; [Tillamook, Oregon]; [Richmond, Florida]; [Moffett Field, California]; [Port Arthur, Texas]; [Brunswick, Georgia]; [Houma, Louisiana]. Hodgdon & Ellerbroek. "Reroo:fing of Two LTAHangars." 20 September "Map ofNaval Air Station (L.T.A.) Santa Ana, Calif" 30 June MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 24 Tedesko, Anton.
[Roberts & Schaefer.] "Lighter-Than-Air Dock, Navy Airships U.S. Naval Air Station Lakehurst, New Jersey." Undated. Anton Tedesko Archives, Civil Engineering, Princeton University. Tedesko, Anton. [Roberts & Schaefer.] "Proposed Blimp Hangar. The Washington National Airport." Undated. Anton Tedesko Archives, Civil Engineering, Princeton University. Internet W eh Sites ://town. surfside.fl. us/nas.html elizcity. com/weeksnas/hangars.htm htour.htm MARINE CORPS AIR STATION TUSTIN ( MARINE HELICOPTER AIR STATION TUSTIN) HABS NO. CA-2707 Page 25 IV.
PROJECT INFORMATION In February Thirtieth Street Architects conducted a Historic Resources Survey of MCAS Tustin to determine which World War II era properties at the base may be considered eligible for the National Register of Historic Places, either individually or as part of a potential historic district ( City of Tustin They recommended that a number of the remaining World War II era buildings and structures associated with the blimp hangars were eligible for the National Register as a district. Based upon these recommendations, the Marine Corps made a determination that these structures constitute a discontiguous historic district eligible for designation on the National Register.
A letter from the State Historic Preservation Office (SHPO) dated June 28, concurred with the Marine Corps determination of eligibility. MCAS Tustin was closed in July as part of a federal action to dispose of surplus federal property for subsequent reuse. As part of the transferal process, it is the responsibility of the military to complete all environmental compliance measures. An Environmental Impact Statement/ Environmental Impact Report was completed for the base ( City of Tustin There are four reuse alternatives proposed (including a No Action Alternative), each of which would result in eliminating most of the structures which make up the two discontiguous historic districts containing the Lighter- than-air Ship Hangars.
Building 28 is the only structure that will be retained (if economically feasible) by all of the alternatives. The Department ofthe Navy is responsible for compliance under Section 106 ofthe National Historic Preservation Act. Under Section if an adverse effect will occur, the agency generally consults with the SHPO, the Advisory Council on Historic Preservation, and others in an effort to find ways to make the undertaking less harmful. Such consultation was conducted for MCAS Tustin and resulted in a Memorandum of Agreement (MOA). The MOA addresses measures to mitigate the effects of destruction of portions of the eligible National Register District. Mitigation measures addressed by this MOA would be considered as a condition of any proposed transfer of property.
This HABS study has been completed to comply with one of the conditions of the MOA. All documentation was completed for the Southwest Division, Naval Facilities Engineering Command under the direction ofKEA Environmental, Inc. (KEA). Karen Weitze, (Architectural historian for KEA) and Christy Dolan, M.A. (Historical archaeologist/historian for KEA) prepared the written documentation between September and November Both authors made contributions to the entire document but Dr. Weitze was particularly instrumental in the engineering and architectural history ofLTA Ship Hangars. Brian Grogan (Photography+ Preservation Associates) photographed both the structures and the architectural drawings associated with them.
In-House Black and White, of San Diego, California, created archival quality photographic copies of the historic photographs.
The federal surveyors worked through Tustin building by building. These are the other structures
they measured and filed a report on, longest report first.
Written history. Quoted verbatim from HABS CAL,30-TUST,1-. United States federal work, no copyright under 17 U.S.C. 105.
Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.