Building the Electrical and Plumbing Shop, is significant for the period from to as a component of the reconstruction of Agnews State Hospital in a pavilion plan. Buildings such as the Electrical and Plumbing Shop, Laundry, Mattress and Upholstery Shop. and Cannery allowed the patients and employees to meet many of their needs on site. Description: Building 205 is a one-story structure with a rectangular-shaped plan. The north and south facades of the building measure an even 52 feet, and the east and west facades are 57 feet across. 1 The building has a total area of square feet. The exterior walls are made of brick covered in stucco and are 13 inches thick. The building rests on a reinforced concrete foundation.
Its flat roof is supported by wood trusses and is covered in "Composition Roof." The north and south elevations have projecting parapets. Building 205 is utilitarian in appearance but has elements (stucco walls and inlaid red brick trim) typical of the Mediterranean Revival Style used for other Agnews buildings. The principal, south, facade is perfectly symmetrical. Each half of this elevation has double doors flanked by large windows. Originally, above the western doors there was a sign that said "Electrical" and another that said "Plumbing" above the eastern doors. All window sashes and frames are steel, industrial sash windows with reinforced concrete sills and lintels. The doors were originally wood, but were replaced with steel doors probably in when the building was remodeled.
An exposed brick wall divides the interior of the building into east AGNEWS ST ATE HOSPITAL ELECTRJCAL AND PLUMBING SHOP (Building No. HABS No. CA-2710-BC (Page 2) and west halves. When it was first opened, the east portion of Building 205 housed the Electrical Shop and the west portion housed the Plumbing Shop. Each half has a large a large two-story "Work Room." At the north end of each space there is a toilet room, office, and stairway to the storage loft above. 2 The partitions around ,the offices are made of tongue and groove siding. The floor is concrete covered with cement except in the offices, which have finished pine flooring. The doors are either paneled or plank with divided-light glazing in the upper half. In the bathroom, there is a toilet and a sink.
The stairway and loft have pipe hand railings. HistoricaJ Context: Plans for an "Electrical & Plumbing Shop" were drawn in in the Division of Architecture under the direction of State Architect, George McDougall. Building 205 was completed in The building continued to serve the dual function of an electrical and plumbing shop until when apparently the Plumbing Shop was moved elsewhere; the building was simply referred to as the "Electric Shop."3 The building continued to house this function through Currently a sign on the building still reads, "Electric Shop" and "Building " 4 Endnotes: 1"Electrical & Plumbing Shop: Agnew State Hospital: Agnew, California," State of California, Department of Public Works, Division of Architecture, Sacramento, California, 7 November sheet 1. 2 Ibid.
3 Anson Boyd, State Architect, "Master Plan of Agnews State Hospital: West Area." California State Division of Architecture, 27 July 3 "Agnews Developmental Center: Buildings of the West Campus," July On file at Plant Operations, Agnews Developmental Center. 4 Ibid. AGNEWS STATE HOSPITAL ELECTRJCAL AND PLUMBING SHOP (Building No. HABS No. CA-2710-BC (Page 3)