Building the Carpenters' Shop, is significant for the period from to as a component of the reconstruction of Agnews State Hospital in a pavilion plan. Buildings such as the Carpenters' Shop, Laundry, Mattress and Upholstery Shop, and Cannery allowed the patients and employees to meet many of their needs on site. Description: Building 206 is a one-story structure with a backwards "F"-shaped plan. The two projecting bays are located on the north side of the building. The main block of the structure measures 150 feet on the north and south facades, and the east and west facades are 33 feet across. The central projecting bay extends from the building 11 feet and is 30 feet wide. 1 The second projecting bay is just east of the first and is an open shed.
The building has a total area of square feet. The exterior walls are made of brick covered in stucco and are 13 inches thick. The building rests on a reinforced concrete foundation. Its flat roof is supported by wood trusses with steel tie rods and is covered in "Composition Roof." Building 206 is utilitarian in appearance but has elements (stucco walls and red brick coping) typical of the Mediterranean Revival Style used for other Agnews buildings. Most facades are symmetrical; the principal (south) facade is typical. In the center of the facade, there are double doors. These are flanked by seven regularly spaced windows on either side. Finally, a single door at each end of this elevation borders the windows. All windows are wooden, four-over-four, double-hung, with segmented tops.
The windows were reused; notes on the plans read, "Old frames and sash in all typical window openings."2 The sashes and frames were probably salvaged from the Century hospital buildings, which AGNEWS STATE HOSPITAL CARPENTERS SHOP (Building No. HABS No. CA-2710-BD (Page 2) were destroyed in the earthquake. The doors were originally tongue and groove doors with divided-light glazing in the upper half. Most of the interior is a large "Work Room." At the west end of the building there are two rooms originally used for "Key Making," and "Hardware Stores." At the east end of the building, the "Lumber Stores" are open to the main room. There is also a separate "Stores" room.
The projecting bay on the north facade was used as a "Glue Room." 3 There is a small lavatory room in the comer of this space. The interior walls of Building 206 are exposed brick laid in a common bond except the toilet partition, which is metal lathe with cement plaster. The building has Oregon Pine Flooring laid over a cement slab with nailers (sleepers) inset. In the building was rehabbed. It is likely that the open shed was added to the north side of the structure at this time. For a view of Building No. see photograph No. CA-2710-14. Historical Context: Plans for a "Carpenters' Shop: Building were drawn in in the Department of Engineering under the direction of State Architect, George McDougall.
Building 206 was completed in In the function remained the same, but the name was changed to "Lumber Storage and Carpenter."4 By the building was once again called "Carpenter Shop," and it continued to be known by this name through 5 Endnotes: 1 "Carpenters' Shop: Agnews State Hospital, Agnews California," State of California, Department of Engineering, Sacramento, 10 April sheet 1. 2 Ibid., 2. 3 Ibid., 1. 4 Anson Boyd, State Architect, "Master Plan of Agnews State Hospital: West Area." California State Division of Architecture, 27 July 5 "Agnews Developmental Center: Buildings of the West Campus," July, On file at Plant Operations, Agnews AGNEWS STATE HOSPITAL CARPENTERS SHOP (Building No. HABS No. CA-2710-BD (Page 3) Developmental Center.