Building the Painters and Upholsterers Shop, is significant for the period from to as a component of the reconstruction of Agnews State Hospital in a pavilion plan. Buildings such as the Painters and Upholsterers Shop, Laundry, Electrical and Plumbing Shop, and Cannery allowed the patients and employees to meet many of their needs on site. Description: Building 207 is a one-story structure with Jong rectangular-shaped plan and a projecting bay on the west end of the south facade. The main portion of the building measures 150 feet on the north and south facades, and the east and west facades are 33 feet across. 1 The Painter and Upholsterer Shop has a total area of square feet. The exterior walls are made of brick covered in stucco and are 13 inches thick.
The building rests on a reinforced concrete foundation. Its flat roof is supported by wood trusses enforced with steel tie rods and is covered in "Composition Roof." The east and west ends of the building have projecting shaped parapets. Building 207 is utilitarian in appearance but has elements (stucco walls and shaped parapets) typical of the Mediterranean Revival Style used for other Agnews buildings. The principal (north) facade is asymmetrical. Beginning at the east end, there are two large doorways (7 'li feet wide by 9 feet tall), which are open to the exterior. Next there are four windows followed by a single door and six more windows grouped in threes. West of these openings there is a pair of large garage doors, a window, and a single door.
All windows are wooden, four-over-four, double-hung, with segmented tops. The windows were used; notes on the plans read, "Use old frames and sash in all window openings."2 The sashes and frames AGNEWS STATE HOSPITAL PAINTERS AND UPHOLSTERERS SHOP (Building No. HABS No. CA-2710-BE (Page 2) were probably salvaged from the Century hospital buildings, which were destroyed in the earthquake. The doors, including the pair of garage doors, were originally tongue and groove planks with divided-light glazing in the upper half. The interior of the building was divided for its two groups of users-painters and upholsterers. Roughly the western third of the building was used by the painters.
This section was divided into a "Varnish Room," "Mixing Room," and "Stock Room." Beginning at the west end of the Upholsterers Shop, there was a "Stores" room inside a "Cutting and Sewing Room," then a large "Work Room" (with a toilet room), "Stock Room," and finally a "Shed for Hair Picking." The shed was connected to the main building but was open to the outside. 3 The interior walls of Building 207 are exposed brick laid in a common bond. The building has a concrete floor reinforced with "Clinton fabric" covered with cement. In the building was rehabbed. It is likely that the projecting bay was added to the south side of the structure at this time. The addition was shorter than the main building, but had stucco walls to match the original structure.
Historical Context: Plans for a "Painters and Upholsterers Shop: Building were drawn in in the Department of Engineering under the direction of State Architect, George McDougall. Building 207 was completed that same year. Sometime prior to the function remained the same, but the name was changed to "Paint and Mattress Shop."4 By the building was once again called "Paint and Upholstery Shop," and it continued to be known by this name through 5 Endnotes: 1 "Painters & Upholsterers Shop: Agnews State Hospital, Agnews California," State of California, Department of Engineering, Sacramento, 10 April sheet 1. 2 Ibid. 3 Ibid.
4Anson Boyd, State Architect, "Master Plan of Agnews State Hospital: West Area." California State Division of Architecture, 27 AGNEWS STATE HOSPITAL PAINTERS AND UPHOLSTERERS SHOP (Building No. HABS No. CA-2710-BE (Page 3) July 5 "Agnews Developmental Center: Buildings of the West Campus," July, On file at Plant Operations, Agnews Developmental Center.