Building the Cannery Building, is significant for the period from to as a component of the reconstruction of Agnews State Hospital in a pavilion plan. Buildings such as the Cannery, Bakery, Electrical and Plumbing Shop, Laundry, and Mattress and Upholstery Shop allowed the patients and employees to meet many of their needs (including food processing and storage) on site. Description: Building 212 is a one-story structure with an irregular-shaped plan composed of the original rectangular building and an "L" -shaped addition on the south side. Measurements that include the addition are not available. The north and south facades of the original building measured 94 feet 8 i:.1ches, and the east and west facades were 40 feet 2 inches across.
1 The current building has a total area of square feet. The exterior wa11s are made of brick covered in stucco and are 13 inches thick. The building rests on a reinforced concrete foundation and footings. Its flat roof is supported by steel I beams and wood rafters and is covered in "Composition Roof." The coping along the tops of the wa11s is protected and accentuated by large mission tiles. Along the center of the roof there is a shed monitor with vents. Building 212 is very plain and utilitarian in appearance. There is no clear front facade, but the north facade faces Fourth Street and is the most visible. This elevation is asymmetrical. Beginning at the east end there is a single door and four sets of coupled windows. A double door overlaps the fourth pair of windows.
Next there is a sma11er window and a window over a single door. All windows (except the small opening) are large, commercial, pivot windows with four-by-five divided lights. The sashes, frames, and mullions that separate the pairs are steel. The doors were origina11y wood panel AGNEWS STATE HOSPITAL CANNERY BUILDING (Building No. BABS No. CA-2710-BI (Page 2) with glazing. When it was constructed, the original building was divided into two sections. At the west end, there was a large "Warehouse" room. The eastern three-quarters of the building was a large open space simply called the "Cannery." At each end of this room there were bathrooms, one for each gender.
In the southeast comer of the Cannery there was a raised concrete platform for a "Steam Kettle." Next to the platform a stairway Jed to a mezzanine. 2 The interior wall between the two rooms is exposed brick. The walls around the bathrooms are hollow tile. The floor is a concrete slab finished with cement. In the former Cannery Room, there is an "L" shaped drainage ditch in the floor, which empties into a sump outside the building. The mezzanine has wooden tongue-and-groove floors. The doors are all wood panel doors, and the double doors between the Warehouse and the Cannery are lined with metal on one side. The stairway has a pipe hand railing, and the mezzanine above has a wooden hand railing. In a large addition was built on the south side of the building.
It is covered in stucco, has large commercial windows, and in general matches the original structure. Historical Context: Plans for the "Cannery Building" were drawn in by Daniels under the direction of State Architect, George McDougall. Building 212 was completed in The building was used as a "Cannery" through but by its function had been changed, and it was the "Sheet Metal and Plumbing Shop." 3 The building continued to be used for this purpose through 4 Endnotes: Daniels, Deputy Chief, "Cannery Building: Agnew State 1 Hospital: Agnew, California," State of California, Department of Public Works, Division of Architecture, Sacramento: CA, 4 March sheet 1. 2 Ibid.
3 Anson Boyd, State Architect, "Master Plan of Agnews State Hospital: West Area." California State Division of Architecture, 27 July And Simin B. Alamooty, "Agnews Developmental Center: West Area Site Plan," 27 December Both records AGNEWS STATE HOSPITAL CANNERY BUILDING (Building No. HABS No. CA-2710-BI (Page 3) are on file at Plant Operations, Agnews Developmental Center. 4 "AgnewsDevelopmental Center: Buildings of the West Campus," July On file at Plant Operations, Agnews Developmental Center.