The PAVE PAWS at Beale Air Force Base is one of four large phased-array radars designed and built by Raytheon. PAVE PAWS was the first solid-state, phase-phase steered array radar operational in the world. The PAVE PAWS at Beale and that at Otis Air Force Base (today, Otis Air Force Station) on Cape Cod, Massachusetts, were the first two radars completed in the system. The original mission of PAVE PAWS was to monitor potential Soviet launches and to serve as early warning of an attack on the United States. A second pair of PAVE PAWS radars followed in the middle sited in Texas and Georgia. The PAVE PAWS in Texas and Georgia are no longer operational. In Air Force Space Command initiated a major upgrade of the PAVE PAWS at Beale Air Force Base.
The ballistic missile defense shield currently proposes to use PAVE PAWS as a platform for enhanced early warning radar, and to combine the system with missile interceptors. Building is an ancillary structure within the PAVE PAWS compound on Beale Air Force Base. The tower was part of the original design of the compound, but has been moved from its first location. Description: Building is alternately known as the Guard Tower.
Designed and constructed as a part of the original PAVE PAWS facility in Building stands just over 31' tall, measuring by The tower is a three-part vertical structure, with the lower section comprised of concrete block and steel cross- bracing; the middle section, of steel cross-bracing alone; and, the upper section, a glass-enclosed observation post with outdoor deck. The lower section is windowless, with a single door and metal louvered vent. A comer steel spiral staircase accesses the observation post. As built, the guard tower sat on the BEALE AIR FORCE BASE, PERIMETER ACQUISITION VEHICLE ENTRY PHASED-ARRAY WARNING SYSTEM, GUARD TOWER (Beale Air Force Base, Building No. (Beale Air Force Base, PAVE PAWS) HAER No. CA-319-C (Page 2) foundation currently occupied by the microwave tower.
When the Air Force discovered that the guard tower did not have full visual coverage of the PAVE PAWS fenced grounds, due to line-of-sight blockage by Building (the power plant), the agency moved the guard tower to its present location further north, between the power plant and the electrical substation. The tower had originally doubled as a microwave tower, with an antenna mounted on its roof. With the relocation of the guard tower in the Air Force erected a separate steel tower for the antenna, siting it on the original guard tower foundation. The information presented here is derived from a field inventory of June Subsequent physical changes to Building are undetermined.
Historical Context: The PAVE PAWS radar installation at Beale Air Force Base was in planning and construction during The architectural-engineering firm responsible for the design of the PAVE PAWS was Raytheon, of Boston. Raytheon's Equipment Division worked with United Engineers & Construction and Jackson & Moreland International, Inc., also both of Boston. The design of PAVE PAWS dates to January The regional architectural-engineering firm adapting Raytheon's master drawings to site-specific conditions at Beale was Tudor Braccia Bentley Architects & Engineers of San Francisco. The Tudor Braccia Bentley drawings are dated March to September Sverdrup & Parcel, of St. Louis, field-checked the as-builts for the Beale PAVE PAWS in June and created the set of drawings that exists today.
During Black & Veatch of Kansas City designed security and surveillance systems for the PAVE PAWS compound at Beale Air Force Base. The historical context for the PAVE PAWS at Beale is complex and multi- faceted. Beale supported major missions throughout the cold war. During the late Strategic Air Command placed a bomber alert facility on the base, while simultaneously Air Defense Command constructed a command post for the Semi-Automatic Ground Environment (SAGE). The SAGE post at Beale was one of 23 in the nation. Its air defense jurisdiction monitored a radar network spread across northern California. Strategic Air Command added a second important mission at Beale in the early Titan I ICBM silos ringed the base, emplaced at Lincoln, Chico, and Sutter Buttes.
After Beale complemented its strategic and air defense roles by becoming a pivotal installation for reconnaissance aircraft, including the U-2, and The PAVE PAWS radar installation was the final major mission to arrive at Beale, in The PAVE PAWS at Beale is one of 10 large, phased-array radars built for the American long-range search-and-track mission, and one of four constructed specifically for the monitoring possible or ICBM attacks against the continental United States. These radars represent multi-decade technological improvements, in radar and computer hardware, and in supporting software programs.
The precursors to the four PAVE PAWS included radars at Eglin Air BEALE AIR FORCE BASE, PERIMETER ACQUISITION VEHICLE ENTRY PHASED-ARRAY WARNING SYSTEM, GUARD TOWER (Beale Air Force Base, Building No. (Beale Air Force Base, PAVE PAWS) HAER No. CA-319-C (Page 3) Force Base, Florida, of the (built for high-inclination space tracking); in the Aleutians, of the early (built for monitoring Soviet missile launches); and, in North Dakota, of the middle (built for the American antiballistic missile [ABM] program). The four PAVE PAWS of were the middle group of large, phased-array radars, constructed on the east coast (at Cape Cod), west coast (at Beale), and Gulf coast/southeast (in Texas and Georgia).
The PAVE PAWS were part of an increasingly sophisticated radar fence erected to provide early warning for the United States. The accuracy and power of the large, phased-array radar made it a viable replacement for the long-range search radars of the Ballistic Missile Early Warning (BMEWS) network of the early During the the Air Force built the final three radars similar to PAVE PAWS-those at the three BMEWS sites in Greenland, England, and Alaska. The PAVE PAWS radars and the other large, phased-array radars in its contextual group, have remained controversial throughout their existence. The politics of the cold war, in particular the fears raised by advanced ICBMs and their complementary ABM defense scenarios, were intimately tied to the PAVE PAWS.
The ABM Treaty of called out the large, phased-array radar (what was allowed, what was not). During the final decade of the war, the United States and Soviet Union each constructed large, phased-array radars interpreted as violating the ABM Treaty: the two PAVE PAWS in Texas and Georgia, and several radars in the Soviet Union. One issue was the potential conversion of a large, phased-array radar to a battle-management radar. The upgrading of the PAVE PAWS at Beale in the late accommodated the requirements of a ballistic missile defense shield, as did the installation of the final American large, phased-array radar in Clear, Alaska, at the end of the decade.