Between October and April the Forest Service, on behalf of the U.S. Government, acquired several structures through forfeiture of the mining claims of the Sweetwater Gold Mine on the Sierra National Forest California. At the time the Forest Service acquired the mine, eight buildings and structures associated with Sweetwater Gold Mine were extant. They were listed as: (1) an ore processing mill, (2) assay office, (3) compressor house, (4) woodshed, (5) barracks/storehouse, (6) main cabin, (7) chicken coop, and (8) outhouse.
In addition to these buildings and structures, mining-related equipment located on the claims include two free-standing stamp mills (moved to the site in the early burned remains of a small sawmill, a narrow-gauge trestle, a mercury retort or concentrate roaster, settling tanks and engines related to ore SWEETWATER GOLD MINE, ASSAY SHED HAERNO. CA-2281-C Page 2 processing, and hundreds of feet of pipeline, miscellaneous tools, hardware, and equipment scattered about the mine site. Physical remnants of mining activities also included an old mill-tailing pond; six or more open adits, and several collapsed or partially collapsed adits and waste rock piles. Forest Service road bisects the Sweetwater Gold Mine site.
In an archeological survey of the Sweetwater Gold Mine was conducted (FS which determined that the property was potentially eligible for the National Register of Historic Places In Applied Earthworks, Inc. of Fresno, California determined that the Sweetwater Gold Mine was eligible under Criteria A, B, C and D. Thereafter, the Forest Service proposed reclamation for the Sweetwater Gold Mine that would have an adverse effect on the cultural resource. After consultation with the SHPO, the Forest Service entered into a Memorandum of Agreement (MOA) with the SHPO to mitigate any adverse effects to the property. This Historic American Engineering Record (HAER), produced in manufacturing/industrial site outline format, is one of the proposed mitigation measures. Part I. Historical Information A.
Physical History of Building: 1. Date of Construction: Ca. Little is known about the history of the assay shed. The first and only mention of the assay shed did not come until In a contemporary account gave a fairly detailed description of the Sweetwater Mine and the equipment on hand, which was then owned by the Midway Mining and Milling Company. The account noted that the Sweetwater Gold Mine had the following buildings on the site: a boarding house, blacksmith shop, concentrates house, and a bunkhouse. However, thereafter, an "assay office" was noted on the property as well. Then, in the mine was sold to E. C. Gamble and W. S. Stewart of Oakland, who "prospected but undertook no sustained mining." 2. Architect/Engineer: Not known. 3. Builder/Contractor/Supplier: Not known. 4.
Original Plans: There are known original drawings, but from a physical examination and evidence, it appears that the assay shed has never been altered. 5. Alternations and Additions: None. Wendy M. Nettles, Randy Baloian, Barry A. Price, and Mark Kile, National Register of Historic Places Eligibility Evaluation of the Sweetwater Gold Mine in Mariposa County. California (Prepared for U.S. Forest Service, Sierra National Forest by Applied Earthworks, Inc.), Fresno, California: pp. SWEETWATER GOLD MINE, ASSAY SHED HAERNO. CA-2281-C Page 3 B. Historical Context: For the historical context pertaining to the assay shed see the general historical context CA-2281 on pages 6, 8. Part II. Site Information A.
General Description: The assay shed is a one and one-half story vernacular wood frame building, which is located on its original location (see Floor Plan). It measures x with a gross square footage of about The building has a shed roof, sloping to the east. The north facade has one door for entry and one window to the right for air and light. The east facade has one window for light. The south facade has no doors or windows. The west facade has an opening that leads to a chute. The building is sheathed with vertical board siding. The interior is divided into two sorting areas. The north half of the building has a platform and doorway that leads to a squared ore bin, which then leads to three individual compartments for ore sorting.
The southern half of the building was used for additional sorting of materials. The south wall of the interior has a series of small bins for this purpose. No foundation was observed. B. Site Layout The Sweetwater Gold Mine site is located on a series of terraces principally along the west side of Sweetwater Creek. The assay shed is on an upper terrace and is an ancillary building to a manufacturing/industrial area (see Site Plan for the location of the Sweetwater Gold Mine Assay Shed), which also included the main adit (collapsed), ten- stamp mill, compressor ruins, smokestack, and locomotive boiler. 1. Character: The building is a typical utilitarian assay office, which usually was simply constructed and easily moved around as needed.
In this building, the assayer daily tested the purity of gold and other precious metals in a sample of rock and minerals using either a wet or dry assay methodology. 2. Condition of Fabric: The building is in fair condition, but the window glass is missing in all the windows. Part III. Operations and Process A. Operations: Two critical jobs were performed in an assay office: daily testing of sample ores and assaying the purity of gold and precious metals in rock samples. The gold from the mine would be assessed and the purity, weight, and value of the gold determined. A typical individual mine assay office would have two areas of operation. One area was used for collecting/grinding ore samples, and another area for weighing. Performing a proper assay required about twenty pounds of rock.
The samples were SWEETWATER GOLD MINE, ASSAY SHED HAERNO. CA-2281-C Page 4 broken up in a grinder. The reduced sample was ground until it had the consistency of corn starch and then a balance was used to weigh the samples. B. Machines: None. C. Technology: Simple equipment, such as a grinder and hammers to pulverize the ores to pea sized samples for wet or dry assaying. The final grinding was done by hand, usually in a mortar and pestle, in order to have the sample's gold content established. D. Workers: The mining superintendent handled the assay office and usually collected samples of the ore to establish the gold content of each day's samples. This was done at the assay office. E.
End Product: Sorting ore samples for analysis of gold content in terms of ounces per ton or the dollar value of gold per ton. Part IV. Sources of Information A. Primary and Secondary