BlockBefore

Victoria Bridge, Spanning Tequesquite Arroyo, Riverside

Victoria Bridge, Spanning Tequesquite Arroyo, Riverside, Riverside County, CA. Surveyed as HAER CAL,33-RIVSI,5-, with a 2,212-word written history.

From the record

“The Victoria Bridge was constructed to provide a convenient route between the agricultural and business areas of Riverside, becoming a vital link for transportation from the citrus groves to the packing houses.”

Written record, HAER CAL,33-RIVSI,5- survey. Machine-read text.

Surveyed by the federal HAER program as HAER CAL,33-RIVSI,5- · the record runs 2212 words · one of 45 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Significance

48 words

Source document Quoted word for word from HAER CAL,33-RIVSI,5-. Not written, edited or summarised by this site.

The Victoria Bridge was constructed to provide a convenient route between the agricultural and business areas of Riverside, becoming a vital link for transportation from the citrus groves to the packing houses. The bridge is also considered to be one of Riverside's most prominent architectural and engineering features.

Written history

2081 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CAL,33-RIVSI,5-. Not written, edited or summarised by this site.

Documentation of the Victoria Bridge was completed by the Historic American Engineering Record (HAER), administered by the National Park Service, Department of the Interior, as part of the California Citrus Heritage Recording Project undertaken during summer For more information on this project refer to HAER No. CA-118 (California Citrus Heritage Recording Project, Riverside, Riverside County, California). Christopher Foord, HAER Historian, Christine L. Madrid, HAER Historian, Victoria Bridge HAERNo. CA-122{Page2)

History

The completion in of the original Victoria Bridge over Tequesquite Arroyo provided a direct link between the developing Arlington Heights agricultural area and the downtown section of the city of Riverside, California. This vital link, an extension of the tree-lined Victoria Avenue designed by Franz Hosp, provided a convenient route from the nearly six thousand acres of citrus groves in Arlington Heights to the packing house district of the city that fronted along the tracks of several rail lines. The first Victoria Bridge seryed the city for 37 years. During that time the wooden timbers of the bridge gradually weakened due to the stresses of increased motor traffic and the installation of electric street cars.

The old wooden span over the arroyo was demolished and then replaced in by the reinforced concrete bridge that still serves the public. The idea of a bridge to span the deep arroyo was conceived by pioneer Matthew Gage, creator of the 21-mile long Gage Canal which watered Arlington Heights, a full seven years before its actual construction.

To see the bridge become reality, a lot had been conveyed to Gage in by Priestly Hall who had subdivided the area known as Half's Addition and later as the Victoria Hill area, and which overlooks Tequesquite Arroyo.1 In a speech made at the opening ceremonies for the bridge on Thanksgiving Day (November Gage freely admitted his motive, and that of the Riverside Trust Company, which had financed the structure and was then developing the Arlington Heights area, "was a selfish one, viz., that it might enhance the value of every acre of our Arlington Heights by making it easily accessible Gage, however, tempered his confession by saying that: My motto has always been, 'Riverside first, last, and all the time.' We want no East Riverside, no Casa Blanca and no Arlington Heights as a business center.

. - but only want one commercial center, where we will have schools, churches, and places of intellectual entertainment, and those to fill them, that we may build up ourselves, and be an attraction to others.3 The original bridge was designed and engineered by William Irving, chief engineer for the Riverside Trust Company, and prior to that position, chief engineer on the construction of the Gage Canal. He was also Matthew Gage's brother-in-law. The design of the bridge was described as a "cantilever truss," constructed of an estimated feet of lumber. Construction began in September Granite blocks laid on bedrock served as foundations. When completed the bridge was long, 60' high at its greatest point, and had a floor wide.

Its weight capacity was estimated to be 300 pounds per square foot.3 The occasion of its Thanksgiving Day opening turned into a gala event, in spite of a lack of publicity surrounding the ceremony, which began at The bridge itself had been decorated by a volunteer committee with flags and flowers. The north end was carpeted for the participants of the formal dedication and was partially folded back to expose the plank where the last spikes would be ceremonially driven. William Irving performed the duties of master of ceremonies, calling representatives of various city groups to come forward and drive the spikes. The final gold-gilded spike was driven home by Margaret Jane Gage, 81 -year old mother of Matthew Gage.

When her task was completed, the event was celebrated with music played by the Knights of Pythias band. Matthew Gage then delivered his speech formally opening the bridge, concluding, "Use it, and enjoy it." The Knights of Pythias then led a procession of horses, carriages, and pedestrians across the bridge. Gage's phaeton was the first to cross, pulled by seven of her grandchildren.6 Victoria Bridge HAERNo. CA-122<Page3) In the Hall's Addition Railroad extended its mule driven trolley line across the bridge. In January of the following year, the Trust Company gave the bridge to the city/ though the formal transfer of the deed did not occur until By electric trolley service had apparently been installed across the bridge by the Riverside & Arlington Railway.

Together with the city, the rail company paid the expenses of having the bridge reinforced to accommodate the heavier rail cars.6 Electric trolley service ended in partly due to the expense of maintaining the bridge, but more because of the advent of increased automobile traffic. Indeed, it was this increase in auto traffic that eventually led to the city's determination that the bridge was no longer safe.7 Thus, on February 15, construction of a new concrete bridge over the arroyo was begun. It was completed on August 15 of the same year. The new bridge was designed by R. V. Leeson of Los Angeles. The construction firm of DeWaart and Son was contracted to build it. L. DeWaart, Jr. supervised the actual work.

When completed: Three main arches formted] the length of the bridge, which extends 522 feet from side to side of the arroyo. Each arch has four arch ribs, and the point highest from the floor of the arroyo is 70 feet. The footings on either side of the bridge rest on solid rock, and the piers which support the structure are also of rock. Each arch of the bridge has within it six smaller arches, making a beautiful and symmetrical whole. A three foot railing extends the length of the bridge on either side, making a support for the sidewalks which are at either side of the 30-foot road. These railings are pierced in arch design. The sidewalks are five feet wide. Twelve light posts provide for illumination.

Each post stands eight feet from the top of the railing, and the posts themselves, of marbelite [sic] construction, blend well with the feeling of the structure. An ornamental globe tops each post. The floor of the bridge is 11 inches thick at the center and 10 inches thick at both sides. An 18-inch crown provides adequate curvature for the roadway. Drain pipes at 25-foot intervals will take care of draining the bridge top during wet weather. Supporting columns are 13 feet apart, and provide great strength for the structure. Provision for pipes and wires for public utilities is made beneath the floor of the 8 bridge.

Materials used in the construction included: sacks of cement; cubic yards of Class A concrete for the upper portions of the bridge; cubic yards of Class B cement for the footings; 500 tons of rock; 400 tons of sand and 121 tons of reinforced steel, most of which is in the arches.9 Also included in the materials list were square feet of macadam surfacing, 38 roadway drains, two storm drains, and 89 cubic yards of railing above the curb.10 The opening and dedication ceremony for the new bridge was held on September 18, at Among the dignitaries was J. Norman Irving, of William Irving and nephew of Matthew Gage, who reminisced about witnessing a similar occasion in when he had been one of seven children Victoria Bridge HAERNo.

CA-122(Page4) who had pulled his grandmother's carriage over the original bridge. Norman Irving then unveiled a bronze plaque commemorating the original wooden bridge, the inscription on which read: This bridge is erected on the site of the original Victoria Bridge, constructed by the Riverside Trust Company, under the direction of Matthew Gage, managing director and opened and presented to the city of Riverside November 26, Designed and built by William G. Irving, C.E., engineer of the company. The building of the Gage Canal by Matthew Gage and the development of Arlington Heights by reason thereof added immeasurably to the wealth and prosperity of Riverside and made necessary the erection of a bridge across this arroyo." The plaque has since disappeared.

In late the bridge was inspected by the California Department of Transportation {Caltrans). Their report suggested that heavy traffic over the previous two years may have contributed to a serious undermining of the bridge's stability. Caltrans had inspected the bridge before in and concluded that lower weight limits needed to be applied to the bridge: that it was not capable of bearing the heaviest weight limits allowed by law without sustaining damage.12 Caltrans forwarded the report on the bridge to the Public Works Department where it was given to William Gardner, chief engineer. Gardner decided to "just sit on it and not stir up the water. The trash trucks, school buses and trucks might be affected.

They might be re-routed." In Gardner stated that at the time, "I didn't consider it high priority. The bridge had functioned for 50 years, so is it worth it to stir up problems it would create. The bridge seemed to be doing OK." When the report of the inspection was published, Gardner admitted that his original conclusion had been probably been erroneous. Since that time, lower weight limits have been posted on the bridge.13 In October plans for the repair of cracks in the bridge by means of epoxy injectors were drawn up and approved by the Riverside Public Works Department.14 Today the bridge continues to act as a throughway from the Arlington Heights area to the major downtown business district.

It is generally considered to be one of the outstanding features of Riverside's architectural and engineering heritage. Victoria Bridge HAERNo. CA-122 (Page 5) ENDNOTES I .Riverside Daily Press, "The Opening of Victoria Bridge," 27 November p. 3; Riverside Press and Horticulturist, "The Opening of Victoria Bridge," 5 December p. 1; Jane Davies Gunther, Riverside County. California. Place Names: Their Origins and Their Stories. (Riverside. CA: Published bv author. pp. 2.Riverside Daily Press. "The Opening of Victoria Bridge," 27 November p. 3; Riverside Press and Horticulturist. "The Opening of Victoria Bridge," 5 December p. 1. 3.Ibid.

4.The Riverside Morning Enterprise, announced the festivities in the "Local News" column with the following: "The formal opening of Victoria Bridge today promises to be quite a grand affair. The ceremony will take pace at Riverside Mornino Enterprise. 26 November p. 5; 5.Riverside Daily Press. "The Opening of Victoria Bridge," 27 November p. 3; Riverside Press and Horticulturist. "The Opening of Victoria Bridge," 5 December p. 1; Riverside Daily Press. "New Victoria Span Dedicated," 18 September p. 2. 6-Tom Patterson, "Victoria Bridge: A City Showpiece That's Done its Job for 51 Years," Riverside Press-Enterorise. 24 February p. 7.lbid. 8.Riverside Daily Press. "New Victoria Span Dedicated," 18 September p. 2. 9.Ibid. 10.Robert V.

Leeson, set of six engineering drawings of Victoria Bridge, approved 6 September (Riverside Public Works Department: Riverside, CA). II .Riverside Daily Press. "New Victoria Span Dedicated," 18 September p. 2. 12.Weight limits, briefly, are based on the number of axles a vehicle has. In California at the time of the Caltrans inspections weight limits were: 25 tons for dump trucks or cement trucks and the like; 36 tons for semi-trailer trucks; and 40 tons for full-trailer trucks. Riverside Press-Enterprise. "Official's Inaction May Have Hurt Bridge," 11 January p. 13.William Gardner, quoted by Riverside Press-Enterorise. "Official's Inaction May Have Hurt Bridge," 11 January p.

Posted limits for the bridge are now set at 18 tons for the first category (see note 26 tons for the second; and 36 tons for the third. 14."Victoria Avenue Bridge Repair, Plan No. (Riverside Public Works Department: Riverside, CA), Victoria Bridge HAERNo. CA-122 (Page 6) BIBLIOGRAPHY PRIMARY

Sources

Leeson, Robert V. Plans (Six engineering drawings of Victoria Bridge), On file at Riverside Public Works Department, Riverside, CA. "Local News," Riverside Morning Enterprise, 26 November p. 5. "New Victoria Span Dedicated," Riverside Daily Press, 18 September p. 2. "Official's Inaction May Have Hurt Bridge," Riverside Press-Enterprise. 11 January p. Riverside (CA) Public Works Department. "Victoria Avenue Bridge Repair, Plan No. On file at Riverside Public Works Department, Riverside, CA, "The Opening of Victoria Bridge," Riverside Daily Press. 27 November p. 3. "The Opening of Victoria Bridge," Riverside Press and Horticulturist. 5 December p. 1. SECONDARY SOURCES Gunther, Jane Davies. Riverside County. California. Place Names: Their Origins and Their Stories.

Riverside, CA: Published by author, Patterson, Tom. "Victoria Bridge: A City Showpiece That's Done Its Job for 51 Years." Riverside Press- Enterprise. 24 February p.

In context

Riverside, California The place record: every map, photograph and survey of this town.
Riverside County, California 655 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Riverside

12 records

The federal surveyors worked through Riverside building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
National Orange Company Packing HouseHAER CAL,33-RIVSI,4-19,348 words
Gage Irrigation CanalHAER CAL,33-RIVSI,3-17,582 words
Arlington Heights Citrus LandscapeHAER CAL,33-RIVSI,7-16,381 words
California Citrus Heritage Recording ProjectHAER CAL,33-RIVSI,6-10,283 words
Benjamin Rockhold HouseHABS CAL,33-RIVSI,8-3,634 words
United States Post OfficeHABS CA-3583,093 words
Union Pacific Railroad BridgeHAER CAL,33-RIVSI.V,1-1,573 words
First Christian Church ParsonageHABS CAL,33-RIVSI,1-1,419 words
Lake MathewsHAER CAL,33-RIVSI.V,2-36 words
Greystone HouseHABS CAL,33-RIVSI,2-34 words
Harada HouseHABS CA-294732 words
Robinson HouseHABS CA-294630 words

Provenance

  • Written history. Quoted verbatim from HAER CAL,33-RIVSI,5-. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.