BlockBefore

Gault Bridge, Spanning Deer Creek at South Pine Street, Nevada City

Gault Bridge, Spanning Deer Creek at South Pine Street, Nevada City, Nevada County, CA. Surveyed as HAER CAL,29-NEVCI,6-, with a 5,338-word written history.

From the record

“The Gault Bridge has been determined eligible for the National Register of Historic Places under criterion c for its significance in the history of bridge technology in California (Caltrans Bridge Inventory The Gault Bridge is the oldest three-hinge, steel arch bridge in California, and a rare, surviving example of this type of bridge construction.”

Written record, HAER CAL,29-NEVCI,6- survey. Machine-read text.

Surveyed by the federal HAER program as HAER CAL,29-NEVCI,6- · the record runs 5338 words · one of 32 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Location

53 words

Source document Quoted word for word from HAER CAL,29-NEVCI,6-. Not written, edited or summarised by this site.

Crossing Deer Creek in Nevada City, Nevada County, California following the alignment of Pine Street from downtown commercial district to the Piety Hill residential area and south to Grass Valley. Quad: Nevada City, CA, 7.5 ' UTM: 10 E: N: Date of Construction Designer: American Bridge Company Builder: Clark and Henery, Stockton, CA

Significance

5208 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CAL,29-NEVCI,6-. Not written, edited or summarised by this site.

The Gault Bridge has been determined eligible for the National Register of Historic Places under criterion c for its significance in the history of bridge technology in California (Caltrans Bridge Inventory The Gault Bridge is the oldest three-hinge, steel arch bridge in California, and a rare, surviving example of this type of bridge construction. Designed by the American Bridge Company, the Gault Bridge was erected in by Clark and Henery, a Stockton, California contracting firm. Report Prepared By: Ward Hill Architectural Historian Octavia Street San Francisco, CA Date: October, -* GAULT BRIDGE HAER No. CA-158 Page 2 I. Description The Gault Bridge spans a moderately steep canyon adjacent to Deer Creek which runs through Nevada City.

The south approach to the Gault Bridge is on a steep hill through a densely built-up century residential district. By contrast, the north approach to the bridge is through a densely wooded hill with a few scattered houses. The visibility of the northern approach to the bridge is especially restricted because the road takes a sharp turn to the east just before the bridge approach. A high concrete retaining wall and sidewalk along the west side of the northern approach was constructed at the same time as the bridge. Much of the bridge is now obscured by a number of large trees and a variety of foliage. The north and south abutments of the Gault Bridge are constructed of large blocks of dressed granite. The larger abutment stones are over 4 feet in length and 1.5 feet wide.

The granite in the south abutment is partially encased on the sides in reinforced concrete. The additional concrete work on the south was for supporting the roadbed at the point the bridge joins the hillside. Rising from a base (at grade) about 19 feet wide, the battered walls of the abutments are approximately 14 feet tall. The total length of the Gault Bridge is 300 feet. The bridge is constructed in three parts - at the north and south ends, individual structures or towers with timber stringers and steel trestle bents, are independent of the central steel arch. The 150 foot main span or arch supports both sides of the foot wide two-lane roadway. The arch and roadway are joined by a riveted Pratt truss.

The truss' vertical members vary in length from 34 feet to 6.5 feet, while the diagonal members are from feet to feet. The three-hinge design of the arch includes a hinge or pin at the foundation footings on each side of Deer Creek, and one hinge at the center span. A distinguishing feature of the bridge is the lattice bracing of the superstructure. Adjacent to the asphalt paved roadbed is a four foot wide, wood plank pedestrian sidewalk, separated from the roadway by a concrete curb with a metal abutment and a low wooden fence. The bridge is notable for the steel railing that runs along the wood-plank pedestrian sidewalk on the west side of the bridge and adjacent to the roadway on the east side of the bridge.

The lacy geometric design and the ornamental newel posts at the two bridge approaches are distinguishing features of the railing. The classically detailed newel posts (at the north and south ends of the sidewalk) have a base and capital with an abstract, inlaid floral design, a fluted shaft and a moulded top cap. GAULT BRIDGE HAER No. CA-158 Page 3 r ^Tr^i NEVADA CITY QUADRANGLE )l ?& t$]u.!!i CALIFORNIA-NEVADA CO. jw^ift; V( 7.5 MINUTE SERIES (TOPOGRAPHIC) ^ Sa ' if^Vfk S y4 NEVADA CITY 13' QUADRANGLE SCALE a I :ooo ;ooo cco sCOO ?E T 1 ML0METE3 CONTOUR INTERVAL 25 FEET OATUM IS MEAN SEA L Y L Figure 1: Gault Bridge Location Map UAUL.T tJKlLtbii, HAER No.

CA-158 Page 4 Figure 2: Nevada City Map showing location of Gault Bridge (downtown historic district outlined in black) GAULT BRIDGE HAER NO. CA-158 \n Page 5 d1 O u S 5 S op Z u tr |S o 9 ( m ^sU- IW # r "7- 1 o < -J 8 a -V ^1 HI GAULT BRIDGE u in u m k HAER No. CA-158 u <* Page 6 C "H 41 Ukz ID ago <" (0 u c 0- (11 t, w S ra 3*0 E ^ IJ B (0 -rt n a L. m o> o u u +J a c w o if1**,- -o> tj o> m "i I I i h11i 1 ^1 '1 *_ GAULT BRIDGE HAER NO. CA-158 Page 7 II. Historical Context A. Early Truss and Metal Arched Bridges in the United States The truss bridge - any bridge whose individual members are connected in a triangular pattern - dates back to at least the Renaissance in Europe.

The earliest iron truss bridges in the United States were initially built primarily for the railroads during the Metal truss bridges were recognized as ideal for supporting the weight of a roadway across a canyon or abyss because the road's weight puts the vertical bars in compression and the diagonals, subject to stretching, in tension. The forces balance, the truss remains rigid, and the road is supported. Important American pioneers in the development of truss bridge types were Squire Whipple, inventor of the Whipple truss, and Caleb and Thomas Pratt, inventors of the Pratt truss.

Whipple was especially important in developing a scientific basis for truss bridge design, enunciated in his influential book, A Work on Bridge 1Building, where he analyzed the stresses in the articulated truss. Patented in the Pratt truss, composed of alternating vertical and diagonal members, became by far the 2 most common truss form in the United States and in California. The arch of the Gault Bridge was built with a Pratt truss. The first major steel arched bridge in the United States was built between and in St. Louis over the Mississippi River. Designed by James B.

Eads, the "Eads bridge" is composed of three adjacent, 500 foot fixed arches, a form adopted "because of its familiarity and rigidity." 3 The fixed arch, however, had limited x David Steinman & Sarah Watson, Bridges and their Builders (New York: Putnam's Sons, p. 2 see Carl Condit, American Building (University of Chicago Press, Chicago, page 96. The California Historic Bridge Inventory identified 137 Pratt truss bridges, the most common type of truss highway bridge in California. David Weitzman notes in his book Traces of the Past (page 73) that the famous bridge engineer J.A.L.

Waddell observed in "that at least ninety percent of all American iron highway bridges then being built were either of Pratt or Whipple design, a trend which had apparently continued throughout the decades after the Civil War." 3 Condit, page GAULT BRIDGE HAER No. CA-158 Page 8 applications in situations where asymmetrical and other unusual forms were needed. By introducing hinges into the crown and springing points of the arch, the indeterminacy of the fixed arch, i.e. the difficulty of calculating its abutment reactions and the compression stresses on the arch itself, were remedied.

By dividing the arch into free halves, the forces acting on the hinges can be exactly calculated, and each segment can be fabricated so that the lower rib conforms more nearly to the curve of the pressure line. Developed by various French and German engineers in the late and early the three-hinged arch was not introduced to the United States until by Joseph M. Wilson, who proposed its use for a train shed for the Pittsburgh station of the Pennsylvania Railroad. 4 The railroad company rejected the proposal as too expensive, but Wilson later designed the first three-hinged arch bridge in the United States over Street in Philadelphia for the Pennsylvania Railroad in Condit describes this bridge as having a multitrack deck supported by twelve parallel wrought-iron ribs spanning 64 feet clear.

The load was carried to the ribs by spandrel trusses in the form of the Pratt truss with pinned connections. 5 Condit notes that Wilson chose this form not only because of the benefits of the determinate structure of the three-hinged arch, but because of its "greater flexibility to compensate for 6 secondary stresses caused by thermal expansion and contraction." As the weight of trains increased during the century, the three-hinged arch was considered to be too flexble for rail bridges, resulting in its use being confined to lighter highway bridges, like the Gault Bridge.

Nevertheless, Hool and Kinne pointed out in that the "three-hinged type has been by far the 4 Condit, page 5 Condit, page 6 Condit, page Hool and Kinne note in their book on bridge design, Movajble and Long-Span Steel Bridges (McGraw-Hill Book Company, New York), that the principal disadvantage of three- hinged arch bridge is its "lack of rigidity." They also note the advantage of this bridge type "lies in its freedom from temperature stresses and in the fact that vertical and lateral movements of the supports, unless they be of considerable magnitude, will not induce any material stress in the superstructure" (page GAULT BRIDGE HAER No.

CA-158 Page 9 most extensively used type of structure in America." 7 The three- hinged arch was recognized as a particularly appropriate highway bridge for natural settings because the arch was considered "inherently attractive in form," and the determinancy of this bridge type allowed the designer to use smaller and fewer members, thereby reducing the obstruction of those viewing the natural surroundings.

8 Henry Grattan Tyrrell notes in his History of Bridge Engineering that the Canadian Pacific Railroad had built a number of attractive three-hinged arch railroad bridges in rocky and steep, but "very picturesgue", mountain areas of British Columbia during the 9 Apart from its potential aesthetic merits, Hool and Kinne also point out that "arches in general" are "most adaptable to deep, rocky ravines where ample head room can be secured, and 10 where natural foundations of the best are encountered. " B. Truss and Metal Arched Bridges in California Like the rest of the United States, the truss bridge was originally # built for the railroads in California.

During the California's counties began to take a more active role in highway bridge building, and the first metal truss highway bridges, essentially variations on railroad bridge designs, were constructed- These early bridges were typically built in the more remote areas of the Coast Range Mountains or in the Sierra Nevada foothills by California-based companies that did not specialize in bridge building. The early metal truss bridge builders in California designed and built bridges as a sideline, with their main business being some other area of metal fabrication (such as mining equipment or agricultural equipment). The truss designs by these California-based firms tended not to be very innovative versions of common truss forms developed by East Coast engineers.

After its organization in the American Bridge Company became an important force in California bridge design. The company was originally organized by Morgan and Company, but most of its 7 Hool and Kinne, page 36 3. 8 David A. Simmons, "Art and Engineering Combined in Springfield Bridge," Ohio County Engineer, Summer, page 19. 9 Tyrrell, pages 10 Hool and Kinne, page 3 63. GAULT BRIDGE HAER No. CA-158 Page 10 stock was purchased by U.S. Steel within a year. " During its first year after incorporation, the American Bridge Company purchased 24 companies (all in the northeast and midwest) representing 50 per cent of the bridge fabricating capacity in the United States.

In the company completed a huge plant in Ambridge, Pennsylvania (near Pittsburgh) which had the fabricating capacity of the five largest companies purchased by American Bridge. The company soon dominated truss bridge fabrication throughout the United States. According to the Caltrans Bridge Inventory, of the extant trusses in California for which a builder is known, American Bridge was responsible for 25 per cent of those built between and 37 per cent of those built between and and 45 percent of those built in the 12 Between and the the truss bridge was gradually replaced by the reinforced concrete arch bridge because it was considered to be aesthetically superior and easier to maintain.

By the "the truss bridge was used very rarely for ordinary bridges fixed bridges of small to moderate length." " Although common in the eastern United States, the three-hinge arched truss bridge was a form rarely used in California. According to the Caltrans Bridge Inventory, only two examples of the three-hinge arch bridge survive in California from the period to The Gault Bridge is one example, and the other is the nearby Edwards Bridge, also designed by the American Bridge Company, built over the South Fork of the Yuba River. With its graceful arch and light, delicate truss members, the Edwards Bridge achieves the ideal of the three-hinge arch open to its natural surroundings.

Likewise, the Gault Bridge "represents a very successful attempt to integrate a truss bridge into a sensitive rural environment." l4 Several three-hinge arch bridges survive in California from the one of which has achieved particular distinction. Designed in by John T. Shaw, onetime Los Angeles City Engineer, the First Avenue Bridge in San Diego, a metal truss three-hinge arch bridge, has been recognized as "one of the most 11 Victor C. Darnell, Directory of American Bridge Companies: (Society of Industrial Archeology, Washington, , page 85. 12 California Department of Transportation, Request for Determination of Eligibility for the National Register of Historic Places Historic Truss Bridges of California, page, 16. 13 California Department of Transportation, page 17.

14 California Department of Transportation, page 21. GAULT BRIDGE HAER No. CA-158 Page 11 beautiful truss bridges in California."15 C. The Design and Construction of the Gault Bridge A few months after California became a U.S. territory in John Marshall discovered gold at Sutter's Mill in Coloma and the California Gold Rush began. The Gold Rush reached Nevada City in when gold was discovered in Deer Creek. Nevada City was founded in and it became the county seat in when Nevada County was formed. The area experienced phenomenal growth because of the influx of people engaged in surface placer mining.

By the Nevada City vicinity had a population of During the election of Nevada City polled votes, exceeded in California only by Sacramento and San Francisco (Nevada City Chamber of Commerce The rapid growth in Nevada City in the early led to the construction of houses outside of the central commmercial district near Broad Street. The first bridge over Deer Creek at Pine Street # was constructed in linking the downtown with an early residential area known as Piety Hill south of Deer Creek.

This small suspension bridge built by the county over Deer Creek was damaged by flood and hard service by 1S A second suspension bridge designed by a 25 year old engineer named Andrew Hallidie was constructed in 1T An inventor of different types of wire rope 15 Caltrans, Historic Highway Bridges of California, page 16 see "From Here to the Cable Cars" in Gold Cities - Grass Valley & Nevada City by Jim Morley and Doris Forley (Howell North, Berkeley), and "Nevada City Played a Vital Role in Bridge Evolution in State," by Al Trivelpiece in 100 Years of Nevada County (Nevada City Nugget), May 18, 17 Halladie was born in Scotland in the son of an inventor and engineer. He immigrated to California in and he first worked with wire cable in spinning a cable for pulling ore carts.

In Hallidie established the first wire cable manufacturing facility in California. Hallidie designed seven suspension bridges using his wire cable in the early none of which survive. During the remainder of the century, very few suspension bridges were built in California after Hallidie stopped designing them in the early Nevertheless, Hallidie manufactured wire cable in San Francisco, and experimented with new applications for the product, until his death in See GAULT BRIDGE HAER No. CA-158 Page 12 Hallidie used separate 12-gauge wires for the two four inch diameter cables on the Nevada City bridge. The fourteen foot wide bridge deck and the towers carrying the cables were made of wood timbers.

i8 A few months after opening in May, the bridge collapsed because one of the bulkheads gave way, killing 2 men and fifteen oxen. After considerable strengthening and rebuilding under Hallidie's supervision, the bridge was reopened in October, Hallidie later used his wire rope for his most famous invention, the world's first cable car line, constructed in San Francisco in Despite its inauspicious beginning, the rebuilt Hallidie bridge over Deer Creek survived for almost forty years until it was considered unsafe in On August 22, the Nevada City Board of Trustees voted to close the Pine Street bridge because its wooden structural members had become too deteriorated.

A petition was presented to the Board of Trustees at their February 20, meeting on behalf of the taxpayers of Nevada City asking the city to replace the suspension bridge "now spanning Deer Creek, and which has been declared unsafe for traffic, with a substantial structure." 19 As a result of this petition, the Board voted to place an ad in the local newspapers reguesting bids for plans and the construction of a replacement bridge.

The public advertisement for the construction of a new bridge published for five weeks specified that "the abutments now in place [should] be used, the distance between the abutments was 300 feet, and that the bridge width should be sixteen feet with a four foot walkway on the west side." 20 Three construction companies - American Bridge Company, Clark and Henery and Clinton Bridge Company - presented plans to the Board on April 9, Representatives of the American Bridge Company and Clark and Henery also made presentations to the Board regarding their plans.

According to the April 10, Daily Morning Union, "the city hall was crowded with interested spectators who carefully scanned the three sets of plans." The Board voted to accept the California Department of Transportation, Reguest for Determination of Eligibility for Inclusion in the National Register of Historic Places: Historic Bridges in California, pages 18 Teivelpiece op. cit. p. 72. 19 Minutes of Nevada City Board of Trustees meeting, February 20, 20 Nevada City Board of Trustees minutes, February 24, GAULT BRIDGE HAER No. CA-158 Page 13 American Bridge Company plans and to advertise for bids for the construction of the bridge according to these plans.

The Daily Morning Union indicated that the American Bridge Company's plans "seemed to be the most admired," and that the arched structure "would be most imposing," and "an ornament to that part of the city." 21 The Board of Trustees held a special meeting on May 12, "for the purpose of receiving and opening bids for the erection of a new steel bridge to span Deer Creek." 22 Seven companies submitted bids for the erection of the new bridge: Healy and Tibbetts $ Loudon Bridge Company Cotton Brothers Blodgett & Company Clark & Henery 3 American Bridge Company 4 Clinton Bridge The Board voted to award the contract to the lowest bidder, Clark & Henery of Stockton, California, and to pay American Bridge Company one percent of the contract amount (i.e.

one percent of or for their plans and specifications. The contract between Clark & Henery and Nevada City was approved the next day on May 13, After the contract was signed, Clark & Henery had to petition the Board twice for an extension of time to complete the bridge because of delays in securing the metal from the East Coast. Exactly one year after the Board of Trustees had awarded Clark & Henery the contract, the May 12, Daily Morning Union reported that "the first real work", the construction of a column on the south side of the creek, had commenced for the new bridge. The work of demolishing the old bridge occurred while the new bridge was under construction.

The Board approved selling the wire cable from the old bridge to Ben Heall for Eugene Goldsworthy, the Superintendent in charge, estimated that work on the arch over the creek would begin about a week after the beginning of construction. " At their May 14, meeting, the Board of Trustees agreed to pay 21 "Plans for New steel Bridge," Daily Morning Union, pg. 4. 22 Nevada City Board of Trustees meeting minutes, May 12, 23 "Progress of Bridge Work," Daily Morning Union, May 14, page 5. GAULT BRIDGE HAER No. CA-158 Page 14 Clark & Henery fifty percent of the contract amount given that the bridge materials had been delivered and construction had begun.

Approximately two months after construction had begun on the bridge, Goldsworthy reported to the Board of Trustees on July 14, that the bridge had been completed according to contract. The July 19, Daily Morning Union reported that the "completed structure is in every way superior and safer than the old suspension bridge." 24 The Board of Trustees officially accepted the new bridge as completed and approved final payment to the contractor on August 13, A separate contract with Brady was approved on July 27, for the construction of the south abutment wall and approach to the new bridge. 25 The Gault Bridge was named after Alex Gault, the mayor of Nevada City who died soon after the bridge's completion. D.

Alterations to the Gault Bridge since The Gault Bridge has received only minor alterations since originally constructed in The original structural steel has remained intact. The most significant alterations have been made to the materials and width of the roadbed. When first constructed, the roadway was covered with only wood planks nailed to the wood stringers. The bridge had no curbing, and there was no barrier separating the sidewalk from the roadway. The bridge was closed temporarily in because the planks had become so worn and deteriorated.26 The larger planks and stringers used to repair the bridge in increased its loading capacity.

The first inspection report of the Gault Bridge by the California Division of Highways in recommended rebuilding the entire roadway with new flooring, stringers and a one inch macadam wearing surface. The report indicated that many of stringers not replaced in were in poor condition. Apparently, no repairs had been made as of the date the state's second report on the bridge in This report indicated that "the plank floor is now loose and 24 "Contractors Complete Their Work," Daily Morning Union, July 19, page 6. 25 Nevada City Board of Trustees meeting minutes, July 27, 26 npine street Bridge will be Repaired during the Next Week," ^ The Daily Morning Union, September 17, page. 4. GAULT BRIDGE HAER No. CA-158 Page 15 in poor condition.

The light mastic surfacing is rough due to this loose floor condition." 27 The report also recommended rebuilding and widening the roadway to feet by cantilevering the sidewalk off the west side of the bridge so the roadway and curbs would occupy the entire width (20 feet) of the superstructure. 2B The widening of the roadway finally occurred in The roadway was also resurfaced with concrete and asphalt, and concrete curbs were installed. Projecting steel I-beams, with steel diagonal supports connected to the bridge's columns and trusses, were constructed to carry the sidewalk's wooden stringers off the west side of the bridge. The original western bridge railing was retained on the new cantilevered sidewalk.

The wood fence today separating the sidewalk from the roadway appears to date from the last 10 years. The bridge has not been altered significantly since 27 California Division of Highways, Report on Nevada City Bridge across Deer Creek at Pine Street, June, page, 2. 2S California Department of Transportation, Gault Bridge Report, June 10, GAULT BRIDGE HAER No. CA-158 Page 16 - / ml *oCj? sh- od -cL^uS K n 4 if / * ' * - S/ * A / r LXJ On+?~^ Ojcitivy- 9-u,^ y^. --- ,- , .^ ^ v 3L d {2i 3- . t iL^lt^-LpL <y c '<. Figure 5: August 13, Minutes from the Nevada City's Board of Trustees Meeting approving payment for completion of Gault Bridge TsnoUjET HAER No. CA-158 Page 17 UI o 4) ,H Ij ** * > -1 0) rt c P 19 m s 3 tt o c J= 0 1/) U " "saiuvA 0J I- o ui 10 10 CO Ql o 313HDNOO .9 a.

o -S- GAULT BRIDGE HAER No. CA-158 Page 18 # III. Sources A. Original plans and specifications: None of the original plans and specifications for the Gault Bridge have survived. Apparently, Nevada City never received a set of plans for the bridge from the American Bridge Company. A California Division of Highways inspection report on the bridge indicates that a state engineer met with the Nevada County surveyor, Waggoner, who had copies of the original stress sheets and specifications for the bridge, but no plans. An old Nevada County Department of Transportation file on the Gault Bridge burned in a warehouse fire in September, B.

Historic views: Historic photographs of the Gault Bridge are in the Searles Library, Nevada City, California and in the private collection of historian Robert Wyckoff, Nevada City, California. A particularly good early view of the Hallidie suspension bridge is in the collection of the California Historical Society Library, San Francisco. C. Bibliography

Primary Sources

Minutes of the Nevada City Board of Trustees Meetings for the following dates (on file in Nevada City's City Hall): August 22, February 20, February 24, April 9, April 14, May 12, May 13, May 14, December 18, May 14, June 30, July 14, July 27, August 13, GAULT BRIDGE HAER No. CA-158 Page 19

Primary Sources Con't

The following articles are from the Grass Valley newspaper, The Daily Morning Union (no authors indicated): "Plans for New Steel Bridge", April 10, page 4. "Bridge will Cost May 13, page 6. "Beginning of Active Work," May 12, page 4. "Progress of Bridge Work," May 14, page 4. "Votes Officially Canvassed First Payment on Bridge," May 15, page 4. "Contractors Complete Their Work," July 19, page 6. "Plans for Bridge Abutment," July 20, page 3. "Pine Street Bridge will be repaired during next week," September 17, page 5. "Repairs Place City Bridges in Fine Shape," October 1, page 4. The following four inspection reports produced by the California Division of Highways (later Department of Transportation) are referenced in this documentation.

The reports are on file with the Caltrans Office of Structure Maintenance and Investigation. Report of Nevada City Bridges, July 9, Report on Nevada City Bridge across Deer Creek at Pine Street, Nevada City, California, July, Bridge Report - Gault Bridge, March 3, Bridge Report - Gault Bridge, June 10,

Secondary Sources

Anonymous The National Hotel, brochure in the collection of the Bancroft Library. 193 8 Nevada County - A General and Historical Summary. Alta California, Inc., Sacramento, CA. Bigelow, Lawrence N. "Fifty-Year Development-Construction of Steel Truss Bridges," Journal of the Construction Division, June, pages 239 - GAULT BRIDGE HAER No. CA-15S Page 20 Browne, Juanita 198 3 Nuggets of Nevada City History. Nevada County Historical Society, Nevada City, California. California Department of Transportation Gault Bridge Inventory Form and Rating Sheet, May, On file with Caltrans Environmental Branch, Sacramento. Request for Determination of Eligibility for Inclusion in the National Register of Historic Places Historic Truss Bridges in California.

On file in the Caltrans Transportation Library, Sacramento. Request for Determination of Eligibility for Inclusion in the National Register of Historic Places Historic Bridges in California (Concrete Arch, Concrete Girder, Concrete Slab, Canticrete, Stone Masonry, Suspension, Steel Girder and Steel Arch) . On file in the Caltrans * Transportation Library, Sacramento. Historic Highway Bridges of California. California Department of Transportation, Sacramento. Condit, Carl American Building. University of Chicago Press, Chicago, Illinois. Davis, Nevada City - A brief historical review. Nevada City Chamber of Commerce. 19 4 8 Gold Rush Days in Nevada City. Berliner and McGinnis, Nevada City, CA. Darnell, Victor Directory of American Bridge Building Companies.

Society of Industrial Archeology, Washington, Falconi, William, City Engineer, Nevada City 19 94 Personal communications with Ward Hill, October, Foster Engineering, Inc. Gault Bridge Report, Part I Final Inspection Report, June, On file City Hall, Nevada City. GAULT BRIDGE HAER No. CA-158 ^k Page 21 Hool, George & Kinne Movable & Long Span Bridges. McGraw-Hill Book Company, New York. Timber and Steel Structures. McGraw Hil Book Company, New York. Lampkin, Bedford "Bridging the Historical Gap," Sierra Heritage, July/August, pages 14 - 15. Lardner, William & Michael Brock 19 24 History of Placer and Nevada Counties. Historic Record Company, Los Angeles, CA. Levick, Nevada County, California. Sunset Magazine, San Francisco, CA.

Morley, Jim & Doris Foley Gold Cities Grass Valley & Nevada City. Howell North Books, Berkeley. Nevada County Chamber of Commerce Nevada County - The Banner Gold County of California. Nevada County Historical Society National Register nomination for the Nevada City Downtown Historic District. Nomination form on file with the SearIs Library, Nevada City. Plowden, David Bridges - Spans of North America. Norton & Company, New York. Silverberg, Robert Bridges. Macrae - Smith Company, Philadelphia, Simmons, David "Art and Engineering Combined in Springfield Bridge," Ohio County Engineer, Summer, pages 13 - 19. Steinman, David & Sara Watson Bridges & Their Builders. Putnam's Sons, New York. GAULT BRIDGE HAER No. CA-158 Page 22 Thompson and West Official and Historical Atlas of Nevada County.

Thompson & West, San Francisco. Trivelpiece, Allen "Nevada City Played Vital Role in Bridge Evolution in State," in 100 Years of Nevada County, May 18, The Nevada City Nugget, Nevada City. Tyrrell, Henry Gratton History of Bridge Engineering. Tyrrell, Chicago, Illinois. Weitzman, David Traces of the Past: A Field Guide to Industrial Archaeology. Charles Scribner's Sons, New York. Wells, History of Nevada County. Thompson & West, Oakland, CA. Wyckoff, Robert M. The Compleat Pedestrian's Partially Illustrated Guide to Greater Nevada City. Gold Country Books, Nevada City. GAULT BRIDGE HAER NO. CA-158 Page 23 IV.

Project Information This Historic American Engineering Record documentation of the Gault Bridge was undertaken because the City of Nevada City, the California Department of Transportation and the Federal Highway Administration are proposing to replace 95% of the existing Gault Bridge with a new structure that will replicate the three-hinge arch design of the existing bridge. The same alignment along South Pine Street will also be used for the new bridge. The 5% of the existing bridge that will be reconstructed on the replacement bridge is the decorative railing and newels along the east and west sides of the bridge roadbed.

Replacement of the Gault Bridge has been proposed because the bridge is substandard with regard to various loading combinations required by the American Association of State Highway and Transportation Officials. A study of the bridge by Foster Engineering concluded that "the level of corrosion had advanced to a point where the structural adequacy of several key elements was very questionable when subjected to full live load conditions." Analysis of alternate loading conditions determined the bridge could safely carry 20% of the standard 3-ton limit with the provision that traffic be limited to two cars per lane on the bridge at any one time. Traffic on the bridge has been restricted to one car per lane since this analysis was completed.

In context

Nevada City, California The place record: every map, photograph and survey of this town.
Nevada County, California 239 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Nevada City

6 records

The federal surveyors worked through Nevada City building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
Purdon Crossing BridgeHAER CAL,29-NEVCI.V,1-98 words
Commercial BuildingsHABS CAL,29-NEVCI,4-40 words
Fire House No. 2HABS CAL,29-NEVCI,3-34 words
Nevada CityHABS CAL,29-NEVCI,1-34 words
Nevada County CourthouseHABS CAL,29-NEVCI,5-32 words
Broad & North Pine Streets (Store)HABS CAL,29-NEVCI,2-30 words

Provenance

  • Written history. Quoted verbatim from HAER CAL,29-NEVCI,6-. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.