BlockBefore

Edwards Air Force Base, X-15 Engine Test Complex, Rogers Dry Lake, east of runway between North Base & South Base, Boron

Edwards Air Force Base, X-15 Engine Test Complex, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA. Surveyed as HAER CAL,15-BORON.V,3-, with a 5,484-word written history.

From the record

“As the only facility for testing engines, individually and with the aircraft, the facility is strongly associated with the United States Man-in-Space program, and particularly with the development of North American Aviation's rocket aircraft.”

Written record, HAER CAL,15-BORON.V,3- survey. Machine-read text.

Surveyed by the federal HAER program as HAER CAL,15-BORON.V,3- · the record runs 5484 words · one of 136 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Significance

5357 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CAL,15-BORON.V,3-. Not written, edited or summarised by this site.

As the only facility for testing engines, individually and with the aircraft, the facility is strongly associated with the United States Man-in-Space program, and particularly with the development of North American Aviation's rocket aircraft. In the became the first aircraft to fly beyond the earth's atmosphere, creating the link between atmospheric flight and space flight. Beginning in tests performed at the engine test complex resulted in the data needed to modify and refine the s powerful rocket engine. The complex has been recommended eligible for listing in the National Register of Historic Places under Criterion A. r Engine Test Complex HAERNo.CA-235 Page 2 PART 1. PHYSICAL

Context of the Site

The engine test complex is located just east of the flight line at Edwards Air Force Base (AFB), south of Taxiway D. It is surrounded by unimproved desert terrain and is accessible via two roads from Taxiway D. The complex consists of 10 buildings and structures within an approximately 2-acre compound surrounded by chain-link fence. Facilities within the complex include two static test stands (one that accommodated the engine, and one that accommodated the entire aircraft, a control bunker, a large maintenance shop, a supply and issue shop, a water storage tank and pump building, and three observation bunkers. The test stands and associated blast deflectors and observation bunkers are located in the northeast portion of the compound. PART 2.

Historical Context

Beginnings of Edwards AFB The need to expand and improve U.S. Army Air Corps (USAAC) airfields and equipment was recognized a decade before the beginning of World War II. Consequently, a bombing and gunnery range associated with March Field was laid out in the Muroc area, which was considered particularly well suited for these purposes. The remote area was mostly unsettled and afforded excellent year-round flying weather and a natural emergency landing field (the hard claypan of Muroc [Rogers] Dry Lake). Additionally, acres east of the lake bed were already federally owned. In September a detachment of 20 men was sent from March Field, Riverside, California, to establish a tent camp in support of the new facility.

In private land, as well as acres of federal lands in and around the lake bed, were acquired to enlarge the bombing and gunnery range, and Muroc Lake Bombing and Gunnery Range was designated a permanent facility of March Field. The following year, a runway and water and sewage systems were constructed, and numerous buildings made up what became known as South Base. In the facility was designated a post separate from March Field with the primary mission of training fighter and bomber personnel, and it was renamed Army Air Base, Muroc Lake. The creation of facilities at North Base was boosted by research projects.

The Bell XP-59A program to develop the United States' first jet-propelled aircraft resulted in the creation of the Muroc Flight Test Base, and rocket experiments associated with JATO (jet-assisted take off) aircraft development were conducted at the Materiel Center Flight Test Base. After World War II, the facility was redesignated Muroc AFB in and rededicated Edwards AFB in North and South Base facilities were combined, and the base was assigned the mission of providing flight testing for new and experimental aircraft. In base activities Engine Test Complex HAERNo. CA-235 Page 3 shifted to the new main base, and most of the facilities at South Base were abandoned and eventually demolished or relocated. At this time, a new runway was built leading into Rogers Dry Lake.

The Beginnings of Experimental Aircraft Research X-planes are experimental rocket- or jet-powered aircraft designed to address research questions about high-speed, high-altitude flight. The X-planes have their roots in a series of conferences held in March and May At these conferences, the National Advisory Committee for Aeronautics (NACA) (later known as the National Aeronautics and Space Administration [NASA]), the Army Air Force, the U.S. Navy, and industry representatives agreed to sponsor the development of transonic and supersonic aircraft. This decision was prompted by problems some propeller-driven aircraft encountered at high dive speeds.

Some engineers and aerodynamicists had dubbed the speed of sound "the 'sound barrier' beyond which no aircraft could safely pass" (Hallion However, to some the sound barrier presented a challenging design problem. Design and development of these experimental high-speed aircraft began in The Navy and NACA preferred a conservative approach concentrating on turbojet-propelled aircraft, but the Army Air Force preferred a more radical design concentrating on rocket propulsion (Hallion Both categories of aircraft were tested simultaneously at Muroc Army Air Field (later known as Edwards AFB). Periods of testing overlapped and the aircraft were not tested in numerical order.

The first X-plane to be tested at the Muroc facility was the (later referred to as the The two original aircraft were completed in and by Bell Aircraft. Powered by the engine, the was supplied with atotal of pounds of thrust in four chambers. Though the engine was not throttleable, the chambers could be fired separately or in combination. Completion of the third that had been commissioned was held off for the development of a turbopump fuel system (Hallion On October Captain Charles E. Yeager of the U.S. Air Force reached a speed of Mach and broke the sound barrier in the Bell rocket research aircraft. Yeager's success spurred the design and construction of other experimental aircraft.

Another four aircraft (X-1A, and were ordered in April These were longer than the original X-1 s and had a revised cockpit and fuel system. Because they could carry more fuel than their predecessors, these aircraft had higher potentials for speed and altitude. The third X-l and the exploded in and the X-1A exploded in The was canceled before completion. The second X-l was remodeled into the X-1E, with a new turbopump system; revised cockpit; and thin, low-aspect ratio wing. (Hallion The X-l aircraft ultimately reached Mach miles per hour) in March and in set an unofficial record altitude for manned flight feet), breaking the one held by the balloon Explorer II feet) set in X-l flights provided testing grounds for several pilot Engine Test Complex HAERNo.

CA-235 Page 4 safety devices, including the T-l partial pressure suit, and revealed a need for reaction controls to maintain aircraft attitude at high altitudes. The last X-l flight occurred in (Hallion While the Air Force was testing the X-l series of aircraft, the Navy was testing the Douglas Skystreak. TheD-558-1 was incapable of supersonic flight. The Navy concentrated on transonic flight (Mach to which freed the X-l to explore the supersonic region (Hallion The X-2 aircraft was commissioned in July and the first X-2 flight was completed on November The X-2 was designed to achieve speeds of up to Mach 3 and altitudes of feet, both representing a increase over existing aircraft performance. The X-2 was powered by the the first throttleable rocket engine on an American research airplane.

Because it was designed to reach high speeds, it was designed to tolerate very high temperatures. The copper-nickel alloy and stainless steel used in the construction of the aircraft could withstand temperatures of up to 750 degrees Fahrenheit. Because the aircraft was designed for high altitudes, a pressurized cabin with an air atmosphere was included in the design. Issues of pilot safety were addressed by the creation of a jettisonable nose capsule with a drogue parachute, which would slow the capsule down so the pilot could continue with normal bailout procedures. The designers did not foresee, however, the need to incorporate a reaction control system to maintain aircraft attitude.

The X-2 failed to supply very much information about aerodynamic heating and aircraft stability and control characteristics. But the aircraft set an unofficial speed record of Mach miles per hour) in July and the first manned flight above feet feet) occurred in the X-2 on September 7, At such high altitudes, the X-2 pilot was completely dependent on his flight suit and the pressurized cabin. Flights of the X-2 revealed the necessity for reliable instrumentation for high-speed, exo-atmospheric flight research. A discrepancy was noted between the actual speed and altitude and the speed and altitude reported on the instrumentation in the cockpit.

This lag was likely the reason behind an unsuccessful pilot bailout in September (Hallion During the mid to late the Navy was testing the This aircraft had a 35- degree sweptwing design and was designed for ground takeoff and landing. Powered by the Navy equivalent of the it was modified to an air launch vehicle after the exhibited some dangerous low-speed characteristics. Other X-Series Aircraft. Other experimental aircraft leading up to the X-l 5 include the X- 3, and XF-92A, all jet aircraft. The XF-92A was manufactured by Convair and was first flown in September It was designed to conduct research on delta wing aircraft. The X-4 was manufactured by Northrop Aircraft Company and was first flown in December The X-4 was designed to research problems of tail-less aircraft.

The X-5 was manufactured by Bell Aircraft and first flown in June It was the first high-performance aircraft to feature variable, in-flight Engine Test Complex HAERNo.CA-235 Page 5 wingsweep capability, a concept that would later be incorporated into fighter planes. The X-3 was manufactured by Douglas Aircraft and was first flown in October It never achieved useful speeds or altitudes, but its failures aided in future designs. The The program was initiated in when NACA directed its laboratories to study problems that were likely to be encountered in flight beyond the atmosphere. It was determined that a manned research vehicle would offer the best possibilities for exploring these problems.

Early in NACA appointed a committee to determine the characteristics of a research aircraft capable of attaining extremely high speeds and altitudes. Later that same year, NACA presented the project to the research and development branches of the Air Force and Navy, as an extension of the already existing cooperative research airplane program (North American Aviation ca. In December bidding was opened to contractors for the design of a high-speed, high-altitude research plane. Four companies entered the competition to design the Douglas, North American, Bell, and Republic.

A year later, the contract to build three planes was awarded to North American Aviation (now known as Rockwell International Corporation) (Hallion The design and development of the advanced the state of the art in several areas, including pilot protection and computer simulation. A completely new full-pressure suit was required. The suit that was designed contained pick-up points and monitored the physiological condition of the pilot. The aircraft also needed environmental controls and life support systems to sustain life in near-space conditions. A computer simulation consisting of a full-scale cockpit with complete pilot display and instrumentation was used for pilot training, to study pilot reaction to various control system changes, and as a planning tool.

The computer simulation proved invaluable for honing pilot skill. Pilot training was very important because the first 85 seconds of the flight determined if an mission would be successful. Additionally, pilot skill was important to the success of the mission in case of equipment failure or malfunction. "Without the pilot and system redundancy, the would have crashed on 13 of its first 44 flights" (Hallion In all, the attained its research goals on 92% of its flights. The contract to design and build the engine to power the was awarded to Reaction Motors Division of Thiokol Chemical Corporation.

The same company had produced the lengine that powered the The contract was awarded in February but the engine was months late in development (Hallion The design requirements for the called for it to be safe, capable of repeated use, and throttleable. When completed, the engine was fueled by liquid oxygen and liquid ammonia and produced pounds of thrust (North American Aviation ca. It also automatically cut off in case of a malfunction, had idling capabilities, and could be restarted in flight. Engine Test Complex HAERNo.CA-235 Page 6 Because of the late arrival of the engine, the first flights were conducted with an interim propulsion system.

A pair of engines with a combined thrust of pounds powered flights until November Operations and Accomplishments of the Program The typical mission began with the air launch of the from beneath the wing of a Boeing aircraft at an altitude of feet above Wendover, Utah. Upon being dropped, the rocket engine provided thrust for the first 80 to 120 seconds of flight. During this time, it climbed to the edges of the atmosphere (CA-235-4). The remainder of the flight was powerless. The aircraft glided through the "High Range", a test corridor containing a network of three tracking stations (at Ely, Nevada; Beatty, Nevada; and Edwards AFB, California) that monitored the flight, and landed on the dry lake bed at Edwards AFB. (Hallion U.S.

Air Force A total of 199 flights were made between and reaching altitudes of feet (approximately 67 miles) and speeds of up to Mach 6.7 miles per hour) (North American Aviation ca.

Accomplishments of the program include: the first use of reaction controls for attitude control in space; development of the first reusable superalloy structure capable of withstanding temperatures and thermal gradients of hypersonic reentry; development of the first practical full-pressure suit for pilot protection in space; development of internal flight data systems capable of functioning in a high-dynamic pressure and space environment; demonstration that pilots could fly rocket-propelled aircraft out ofthe atmosphere and return them to selected landing areas with great precision and accuracy; reaffirmation of the importance of man in space as director and monitor of machine and system operation; establishment ofthe groundwork in the area of organization and cooperation between the Air Force, the Navy, and NASA necessary for future work in space exploration; demonstration of a pilot's ability to function in a weightless environment; and Engine Test Complex HAERNo.

CA-235 Page 7 use of the aircraft as testbeds carrying a wide variety of experimental packages such as insulation for the Saturn booster and advanced celestial navigation equipment (Thompson Hallion The tested prototypes for the Mercury and Apollo missions. These accomplishments, among others, laid the groundwork for the United States space program. Ultimately, the space shuttle, a reusable manned spacecraft, has benefitted most from the research conducted with the and the Space Program The Man-in-Space theme, under which the engine test complex was evaluated, includes the pre-1958 technical foundations and technological advances that made space exploration possible, as well as the concerted effort from to to land a man on the moon.

From the creation of the Air Force Materiel Command's Flight Test Base at Muroc Army Air Base until the successful Apollo 11 moon landing, the facilities at Edwards AFB played an integral role in the testing and development of propulsion systems and vehicles essential for space exploration (Walker and Wickam Hallion Swenson et al. Butowsky Early research and testing ofhypersonic and supersonic aircraft (the X-planes) and the effects ofhigh-speed, high-altitude flight on materials and pilots provided the foundations for manned space flight (CA-235-5). research confirmed that exo-atmospheric manned flight was possible and provided physiological data on human reactions to weightlessness. The first full-pressure suit for use in a space environment was developed during the program.

research resulted in the development of the first reusable superalloy structure capable of withstanding high temperatures encountered during reentry to the earth's atmosphere. The bridged the gap between atmospheric and space flight and was instrumental in many aspects of design and development of the vehicles and equipment that would eventually be sent into space. PART 3.

History of the Engine Test Complex

The Engine Test Facility was completed in October and was used to test engines, engines, and complete aircraft, after delivery and prior to test flights (U.S. Air Force The first research aircraft arrived at Edwards AFB on October 17, North American Aviation personnel "immediately performed pressurization tests and flow check on the propulsion systems test stand in preparation for the first modified engine tests" (U.S. Air Force In the interest of expediency, propulsion personnel moved to the engine test complex at the main base from the rocket propulsion laboratory on Leuhman Ridge. This test complex was used to test the and engines, alone and installed in ( the X-l 5 aircraft.

Prior to flight, the engines were subjected to several controllability and functional Engine Test Complex HAERNo.CA-235 Page 8 tests (U.S. Air Force Vibration tests were performed on the entire aircraft. The test complex was in use until the completion of the program in PART 4.

Description of the Engine Test Complex

Original Plan of the Engine Test Complex Original construction of the complex began in with construction of the two test stands, the control bunker the maintenance shop and the water storage tank and pump building and (CA-235-1, CA-235-2). The design contract for the Rocket Engine Test Facility was awarded to the Macco Corporation in June (U.S. Air Force In February the contract for the construction of the facility was awarded to P. J. Walker Company at a fixed price of The final cost exceeded (U.S. Air Force As originally constructed, both test stands consisted of a concrete slab, a heavy steel thrust mounting, two sets of three fluorescent light fixtures, and water deluge system shower heads (CA-235-A-6). At the northeast end of each test stand was a reinforced concrete flame deflector.

Both test stands had protective concrete walls behind which fuel, a water hydrant, and other materials were stored during test firing. Changes in the Engine Test Complex Additions and alterations to the complex were made between and In a lean-to was added to the southeast elevation of the maintenance shop, which expanded the area of the building considerably. Some time before a lean-to was added to the opposite (northwest) elevation of the same building. In the supply and issue shop was moved from North Base to the Rocket Engine Test Facility and three identical observation bunkers and were constructed at the complex aircraft test stand (CA-235-3).

An explosion damaged the test stand capable of accommodating the complete aircraft in June Archival resources do not indicate whether the stand was returned to its original configuration or if repairs included alterations. Most recently, in was renovated for use as a chemical storage area. The rolling, open-sided, gable-roofed shelter has been removed. The structure originally moved on tracks to cover the rocket engine test stand. Other changes made to the area include the addition of a door opening in the water storage tank and the addition of a steel beam post-and-lintel arch to the vehicle test stand. (Komporlides Engine Test Complex HAERNo.CA-235 Page 9 Current Features and Appearance The engine test facility is located just east of the flight line at Edwards AFB.

The complex is accessible via one of two roads that lead southeast from Taxiway D. From the westernmost access road, the water storage and water pump buildings and are located just east of the entrance. The supply and issue shop is located immediately to the east just past the entrance. The largest building in the complex is the maintenance shop The test stands, observation bunkers, and control bunker are located in the eastern half of the complex. The complete aircraft engine test stand is located in the northeastern quarter of the complex. An associated concrete blast deflector is located to the northeast, where the engine would fire. The test stand and the observation bunkers associated with it are located in the southeast corner of the fenced complex.

When mounted, the aircraft would have pointed to the southwest and fired to the northeast, where a reinforced concrete and steel blast deflector is located. Three identical observation bunkers provided a protected space from which to control and observe the testing. is located approximately 30 feet north of the test stand and is oriented north- south. is located approximately 20 feet south of the test stand and is oriented north-south at a perpendicular angle to the stand. is located approximately 45 feet southwest of the test stand and is oriented northeast-southwest. The control bunker is an earth-filled, reinforced concrete control bunker shaped like a truncated pyramid and located midway between the two test stands. Buildings in the area are currently used for storage.

The test stands are no longer in use. Control Bunker, The control bunker is located between the two test stands. It measures 15 by 37 feet and is a brown, earth-filled reinforced concrete structure shaped like a truncated pyramid. A small, cube-shaped ventilation cupola is located near the center of the flat roof. A deeply recessed, square entryway leading to a steel fire door is located on the southwest facade (CA-235-D-1). Nine steel rungs imbedded in the concrete of the wall form a ladder to the southeast of the entrance. The other three elevations have no fenestration or detail. The control bunker is currently used for storage. Maintenance Shop, The maintenance shop is a corrugated metal building centered along the southwest fence line of the complex (CA-235-C-2).

It has a poured concrete foundation and a gabled aluminum roof with very slight overhangs. The roof line is broken by shed- roofed additions on either side. The front (northeast) facade is dominated by large sliding bay doors. Other fenestration consists of single entry doors on the other elevations. Water Storage Tank, is a cylindrical steel-plate water storage tank that supplied water for the test stand deluge system (CA-235-C-1, CA-235-C-3). The tank stands approximately 24 feet tall and has a conical roof. A ladder is located on the southeast side of the Engine Test Complex HAERNo.CA-235 Page 10 tower and leads to a round hatch on the top. Large water pipes with valve handles run along the side and bottom of the tank.

A scale for measuring volume is located northeast of the ladder and pipes. Water Pump Building, Located immediately northeast ofthe water tank, housed the pumping equipment for the test stand deluge system (CA-235-C-1). The pump house is a gable-roofed, corrugated metal, one-story building on a poured concrete foundation. The front (southeast) facade has double sliding bay doors. A small concrete entry apron is located in front of the main doors. A heavy I-beam to support a winch extends from the top center of the double doors. Other fenestration includes a single entry door on the northeast elevation. A large water pipe from the water tank enters the southwest elevation. The building is currently used for storage.

Supply and Issue Shop, This building was added to the complex in and was completely renovated in the It is a rectangular one-story building with a poured concrete foundation and corrugated aluminum siding and roofing. Two 2-foot-high concrete block footing walls extend along the northwest and southeast elevations and wrap around the corners onto portions ofthe front and rear elevations. Fenestration includes swinging doors on the front (northeast) facade and a single entry door on the southwest elevation. A covered area or shed is located on the northwest elevation. The building is currently being used for chemical storage. Test Stands. Two test stands are located at the engine test complex.

Both test stands were completed in The rocket engine thrust test stand occupies the northeastern quarter ofthe complex. The test stand designed to accommodate a complete aircraft is located in the southeastern quarter of the complex. The engine test stand is oriented so that a mounted engine would fire toward the northeast (CA-235-A-1, CA-235-A-2). A concrete pad measuring 15 by 40 feet is flush with the surrounding asphalt. The concrete pad is cut by two flush-mounted steel rails that once carried a gable-roof mobile shelter and lead away to the southwest edge of the compound. Centered on the concrete pad is a large steel thrust mounting block consisting of a massive, heavily braced square frame of steel beams with a wide, round aperture in the center.

A long, narrow pit covered with removable steel grating leads southwest from the mounting block. On either long side (northwest and southeast) of the engine mount and pit are two long racks, each carrying three fluorescent lighting fixtures and five water deluge system shower heads. The racks consist of three I-beams posts each connected by an I-beam lintel. All steel work is painted bright yellow, the original color. (The repainting is fairly recent and was undertaken by some airmen interested in preserving the X-l 5 complex.) Along the southeast edge of the test stand is a low metal box containing instrumentation cable connections. A safety shower stands just to the side of the front of the test stand in the southeast.

Immediately northwest of the test stand, and parallel to it, is a high concrete wall approximately 1 V% feet thick, painted brown. The wall shielded instrumentation (remnants now badly damaged), a water hydrant, a small spherical tank, and liquid oxygen tank trucks from test firings. Behind the test stand to the Engine Test Complex HAERNo. CA-235 Page 11 northeast, near the compound's fence line, is a large wedge-shaped flame deflector of reinforced concrete, protected on its exposed surface by thick steel plates. The test stand for the complete aircraft consists of a heavy concrete slab, a steel thrust mounting, and a steel frame. When mounted, the would have fired to the northeast (CA-235-A-3).

The heavy concrete slab is approximately 15 by 40 feet with a long, narrow pit down the center. Steel gratings may once have covered this pit, but are now missing. The central portion of the concrete slab is raised several inches above the surrounding surface. At the northeast end of the raised area is the massive steel thrust mounting, a vertical rectangle of heavy steel I-beams diagonally braced by thick steel tubing (CA-235-A-4). Two tall I-beam posts connected by an I- beam lintel straddle the concrete pad. This arch was not originally part of the test stand. To either side ofthe test stand are three tall stanchions, each holding a fluorescent light fixture. Shower heads for the water deluge system stand on tall pipes near the southwest end.

A massive concrete wall, of the same type standing next to the engine test stand, runs at a diagonal angle to the north of the thrust mounting. A smaller concrete wall stands to the northwest parallel to the concrete pad. To the northeast is a flame deflector of the same design as the one behind the engine stand (CA-235-A-5). The test stand is now used as a basketball course. Run-off gutters for both test stands carried deluge water away toward lined ditches and reservoirs northeast of the test complex. Observation Bunkers. These semi-subterranean observation bunkers convey their purpose and the hazardous nature of the testing that was conducted at the engine test facility.

The bunkers provided protection for personnel while they were conducting and viewing tests on the test stand for the complete aircraft. All the bunkers appear to be in good condition from the exterior. They do not appear to have been reused for any purpose after testing was completed. The three observation bunkers are identical square, reinforced concrete blocks protruding approximately 2 feet above the ground surface (CA-235-B-2). One side of the cube is wedged and contains the steel and concrete roof entrance, which is hinged with counterbalances. When closed, the door is a protruding concrete and steel square on the sloping side of the cube (CA-235-B-3). When open, the door stops against a small bumper projecting from the flat roof.

A poured concrete step with two hand-grab poles is located in front ofthe entrance. A pair of horizontal double paned windows protected by vertical iron bars are located at ground level on the elevation facing the test stand (CA-235-B-1). and are currently painted brown. A very steep metal staircase leads into a small square space, large enough to accommodate only a few people. The floor, walls, and ceiling are reinforced concrete. Interior furnishings include a plywood control desk with a raised lip and openings for various instrumentation (likely for firing control). appears to be in good condition. is filled with water, and could not be opened. Engine Test Complex HAERNo. CA-235 Page 12 PART 5.

SOURCES OF INFORMATION Interviews No interviews with persons associated with the engine text complex have been conducted. Bibliography Butowsky, H. A. Man in Space National Historic Landmark Theme Study, Phase II U.S. Department of the Interior, National Park Service, Superintendent of Documents, Government Printing Office, Washington, DC. Hallion, R. P. On the Frontier: Flight Research at Dryden, The NASA history series. Scientific and Technical Information Branch, National Aeronautics and Space Administration, Washington DC: Hallion, R. P. American Rocket Aircraft: Precursors to Manned Flight Beyond the Atmosphere. Chapter 18, pp. in History of Rocketry and Astronautics, edited by Kristan R. Lattu. AAS Volume 8, IAA Volume 3.

Published by Univelt, San Diego, for the American Astronautical Society. Komporlides, D. Building, Structure, Object Record. Prepared by Tetra Tech, Inc. On file at Environmental Management Office, Edwards Air Force Base, California. North American Aviation, Inc. ca. Press Information. Prepared for the U.S. Air Force, NASA, and U.S. Navy. Prepared by North American Aviation, Inc. Los Angeles Division. On file at the History Office, Edwards Air Force Base, CA. Swenson, L. S., J. M. Grimwood, and C. C. Alexander This New Ocean: History of Project Mercury. The NASA History Series. Scientific and Technical Information Division, Office of Technology Utilization, National Aeronautics and Space Administration, Washington DC. Engine Test Complex HAERNo.CA-235 Page 13 Thompson, M. O.

The Edge of Space: the Flight Program. Smithsonian Institution Press, Washington, DC. U.S. Air Force Air Research and Development Command: History of Air Force Flight Test Center, Edwards Air Force Base, California. 1 January-30 June Volume I: Narrative 3. Written for the Historical Branch by Ronald-Bel Stiffler, Center Historian, and Master Sergeant Charles V. Eppley, Assistant to the Center Historian. On file at the History Office, Edwards Air Force Base, California. Air Research and Development Command: History of Air Force Flight Test Center, Edwards Air Force Base, California. 1 July - 31 December Volume I: Narrative 3. Written for the Historical Branch by Ronald-Bel Stiffler, Center Historian, and Master Sergeant Charles V. Eppley, Assistant to the Center Historian.

On file at the History Office, Edwards Air Force Base, California. Walker, L. E., and S. E. Wickham From Huffman Prairie to the Moon: The History of Wright-Patterson Air Force Base. Office of History, Air Base Wing, Wright-Patterson Air Force Base, Air Force Logistics Command. Superintendent of Documents, U.S. Government Printing Office, Washington DC. Supplemental Material Location maps and site maps follow page 14. PART 6.

Project Information

This report has been prepared to mitigate the negative effects of the proposed destruction of three buildings within the Engine Test Complex. The buildings proposed for demolition are three identical observation bunkers and associated with the test stand designed to accommodate a complete aircraft. A previous study recommended the Engine Test Complex as being eligible for listing in the National Register of Historic Places under Criterion A as a historic district and Criteria Consideration G as a property having achieved significance within the last 50 years (Tetra Tech Because these buildings are contributing elements of the Engine Test Complex historic district, their demolition will affect the integrity of the facility as a whole. As such, this document addresses the entire facility.

Engine Test Complex HAERNo.CA-235 Page 14 This project was conducted under Contract DACW05-95-D-0003/Task Order and was overseen by the Edwards AFB Historic Preservation Officer, Richard Norwood. The narrative portion of this document was prepared by Susan Lassell, Shahira Ashkar, and Dana McGowan of Jones & Stokes Associates (Sacramento, California). Photographic documentation was completed by David DeVries of Mesa Technical, Berkeley, California. Engine Test Complex HAER No. CA-235 Page 15 Banning Source: Adapted from EarthTech Project Vicinity Map, Edwards AFB, California Engine Test Complex HAER No.

CA-235 Page 16 Blast Deflector Blast Deflector Test Stand Not to scale Key Features of Engine Test Complex, Shown in Bold 500 iris- Engine Test Complex feet HAERNo.CA-235 BaM map: USGS 7.5'-seriM Edwards, TN mN Page 17 California, quadrangle 4^ _#s .. - ;i. .-; (n d'iM"' -"a5ft: AmJM;P(ydan=--.;:-T;" y* ^s\ Ras aai-ct} Facility'- i i J *>:u.?..v- r : C3 '. o Buildings Proposed for Demolition, Complex Shown in Bold on the Inset Map

In context

Boron, California The place record: every map, photograph and survey of this town.
Kern County, California 752 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Boron

24 of 113 records shown

The federal surveyors worked through Boron building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
Jet Propulsion Laboratory Edwards FacilityHAER CAL,15-BORON.V,1-62,920 words
Edwards Air Force BaseHAER CAL,15-BORON.V,2-38,233 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4-14,838 words
Edwards Air Force BaseHAER CA-308-A5,579 words
Edwards Air Force BaseHAER CA-308-B5,193 words
Edwards Air Force BaseHAER CAL,15-BORON.V,3B-57 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4N-57 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4D-56 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4P-56 words
Jet Propulsion Laboratory Edwards FacilityHAER CAL,15-BORON.V,1M-56 words
Edwards Air Force BaseHAER CAL,15-BORON.V,3A-55 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4Q-55 words
Edwards Air Force BaseHAER CAL,15-BORON.V,2W-55 words
Jet Propulsion Laboratory Edwards FacilityHAER CAL,15-BORON.V,1Y-55 words
Jet Propulsion Laboratory Edwards FacilityHAER CAL,15-BORON.V,1DD-55 words
Jet Propulsion Laboratory Edwards FacilityHAER CAL,15-BORON.V,1EE-55 words
Jet Propulsion Laboratory Edwards FacilityHAER CAL,15-BORON.V,1GG-55 words
Edwards Air Force BaseHAER CAL,15-BORON.V,3C-54 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4A-54 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4L-54 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4O-54 words
Edwards Air Force BaseHAER CAL,15-BORON.V,2X-54 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4K-53 words
Edwards Air Force BaseHAER CAL,15-BORON.V,4M-53 words

Provenance

  • Written history. Quoted verbatim from HAER CAL,15-BORON.V,3-. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.