New London County, Connecticut - Chapter 19: Community Activities, 1922
From A Modern History of New London County, Connecticut;, published 1922. 6,804 words, reproduced complete and unedited. Source changes inside the text are labelled in place.
Contents
3 sectionsThe section headings the book prints inside this chapter. Each one jumps to where it begins.
The text
6,804 wordsMachine-read from scans of A Modern History of New London County, Connecticut;, published 1922. Nothing has been corrected: fixing what looks like a misspelled name is how an invented one gets published. Source changes are marked where they occur.
Chapter 19: Community Activities
Any true history of New London county must give some picture of the community activities. How do people get on with one another? Is there a spirit of mutual co-operation for the good of the whole civic body? What is the relation between labor and capital? The present chapter will deal with some of these questions.
And first we submit certain sketches, drawn from authoritative sources, of the rise of the chief business enterprises of the county, supplementary to the statistics already printed. What is said of one company will hold for many others ; the story of success is a story of individual enterprise, fair business methods, a spirit of co-operation in the whole establishment.
The enviable and well-earned reputation of the Brainerd & Armstrong Company covers a period of over half a century. In 1867 a partnership was formed by Benjamin A. .A.rmstrong and James P. Brainerd for the manufacture and sale of spool silks. These gentlemen had become experienced in the sale of spool silks, and their acquaintance with the trade, of New York State particularly, led them to believe that they could successfully manufacture and market their own brand of goods.
The twelve years following were devoted to creating a demand for the goods in the large Eastern cities, by liberal advertising and active canvass of the trade. Sure though this process may have been, that it was slow is shown by the fact that in 1879 only seventeen hands and a superintendent were employed at the mill in New London, Connecticut, in the manufacture of the goods. The company owned no plant of its own, but in 1880 rented power and space from a wood turning shop along the New London wharf line.
In these quarters, the business showed a growth to seventy hands by 1881. That year the company started its own dyeing, with six or seven hands employed in that department. By 1883, some 125 hands were in the employ of the company, and plans were undertaken for the purchase of a building site in the heart of the city and the erection of a modern brick factory which it was estimated would meet all demands of growth for the next twenty years.
On Good Friday. 1885, the company moved into the new plant, w'ith two hundred hands employed in the manufacture of spool, sewing, knitting and crochet silks and plain embroidery silk of the ordinary dye then in use.
The growth and prosperity of the Brainerd & Armstrong Company is in a large measure due to the fact that it was the pioneer of the wash embroidery silk movement in this country. In 1886, the company made a number of remarkable discoveries by which it was able to dye silks so that they would stand washing in hot soap suds. A few .shades of the embroidery silk, produced at that time, in the old fashioned manner, would stand a mild and careful rinsing in luke-warm water. The newly discovered method of the Brainerd & Armstrong Company, made it possible to produce their "Asiatic Dye" wash silks which would stand washing at 212 degrees without loss of color or injury to the most delicate fabrics. The introduction of those goods gave a new impetus to the art of embroidery throughout the entire country, and although at the present time a number of manufacturers produce embroidery silks called "wash colors," still there is no brand of silk in this country that can claim to have stood the test of so many years as that produced by the Brainerd & Armstrong Company.
In 1894, the Brainerd & Armstrong Company originated and advertised another original invention which marked another advance in the use of em. broidery silks. The device was an ingenious way of putting up wash embroidery silks in paper holders, in such a manner that embroiderers are saved the trouble of unwinding the skeins and rewinding them again on cardboard as was customarily done with the old-fashioned skeins, to prevent them from roughing and snarling.
In 1888, the companj' become interested in weaving broad silks, and a few looms were started on the manufacture of silk art fabrics. In several more years, as the demand for this class of goods became less, these looms were superceded by looms for the manufacture of such staple goods as tailors' silk and satin linings. This end of the business has shown a wonderful and steady growth so that at the present time the company has over 600 looms devoted to the manufacture of a wide range of dress silks and silk and satin fabrics for tailors' use.
The plant that in 1885 seemed likely to take care of the company's growth for many years, has time and again demonstrated itself as insufficient for the company's business, and additions and extensions have been frequently made. Besides these additions, the company years ago acquired the entire plant of the Orlo Atwood Silk Company, in an entirely different part of the city. This plant is now devoted wholly to throwing, i. e., to spinning and twisting the silk fibre into the finished thread. In more recent years there has been added a modern and convenient dye house of large capacity with its own private supply of absolutely pure water of chemical properties extraordinarily adapted to dyeing. A model weaving plant has also been established in the neighboring city of Norwich, Connecticut. \
During the term of the w-ar, over half the capacity of those mills was employed in the production of machine twist and sewing silk for the use of the armies and navies of the United States and of our allies.
The mills of the company cover large area and in full operation furnish employment to 1,000 operatives. The product, consisting of silk threads and fabrics, is supplied to dealers and storekeepers throughout the United States through salesrooms located in New York, Boston, Philadelphia, Baltimore, Chicago, St. Louis, Cincinnati, St. Paul and San Francisco. Nor is the selling field confined to this country, for the products of this company are largely sold in Mexico, Cuba, and the countries of Central and South America.
In 1884 the comjiany was reorganized and. at that time, Mr. Brainerd's active connection with the concern came to an end. Benjamin A. Armstrong still remains the active head of the company. The concern is one that has long enjoyed the highest regard and esteem of the trade and of the public by reason of the superior qualities it has developed and maintained in its goods, as well as by the consistent practice of a policy of fair and honest dealing, all of which accords with the best traditions of Xew England where was bred our old-fashioned religion which in the final analysis is at the bottom of all permanent industrial success.
The Thames Tow Boat Company was incorporated in Norwich, December 29, 1865, by Mr. Edward Chappell and other? with a small capital stock and did river and harbor towing for a number of years with two or three small tug boats. The business was finally transferred to New London, February 28, 1879, the controlling interest being acquired by Mr. Frank H. Chappell and others. The business was gradually enlarged and barges and larger tugs built and bought so as to operate a towing and transportation business on Long Island Sound and New York waters. The business could not stop here, so the field of operations went into ocean tawing and transportation, and the Thames Tow Boat Company were the pioneers in the tow boat business of transportation of coal from Norfolk, Virginia, to points east as far as Bangor, Maine, in its own barges and towed by its own tug boats. The business of increased tonnage as to barges and tugs needed more capital and it was increased from time to time and it reached $250,000. In 1900 the fleet of tugs and barges was of such size that it necessitated continued repairs, so it was considered expedient to have a shipyard of its own, and the site on the Thames River was selected for the plant and it was thought advisable to make the plant large enough to accommodate all of its own work and any outside work that came along so as to make the shipyard a paying proposition.
A goodly number of the barges and tugs that the company owns were built on Winthrop Point, before it started the shipyard, but afterwards at its own yard the "John Forsyth," a large barge, and the tugs "Paul Jones" and "Bess," and two large steam lighters, were built for the Thames Tow Boat Company's fleet. The tug "Paul Jones" was sold to a firm of brokers in New York in December, igi6, and was afterwards sold by them to the French government. She was at that time the largest steam tug on the Atlantic seaboard.
On the first of the year 191 7. the business having been quite prosperous during the preceding years, the capital was increased to $i, 000,000. The company has a large fleet of barges and tugs and a shipyard with two large marine railways and shops with a large inventory of merchandise on hand for the repairs of all classes of vessels, both steam and sail, wood or iron. The class
Mr. F. H. Chappell, who was still president of the company, died in November, 1919. The oflficers at the present time are as follows: Laurence A. Chappell, president; Frank H. Chappell, Jr., vice president and treasurer; Lee S. Denison, secretary and assistant treasurer; Edward F. Clark, agent.
The main office of the company is located at 258 Bank street, in the imposing three-story stone building, formerly owned by the Brown family, which has been remodeled inside for an up-to-date office.
The company is prepared to transport coal and other merchandise in barges of its own from 400 to 4,000 tons and to tow barges and vessels on river, sound and ocean on the Atlantic seatoard. The new set of marine railways that it is now building at its shipyard will enable them to take care of any rush work that may come along.
The manufacturing plant of D. E. Whiton was originally established in West Stafford, Connecticut, in 1856. It was built for the purpose of manufacturing centering machines and lathe chucks. In 1881 Lucius E. Whiton, who had then finished preparatory school, engaged in the business with his father under the firm name of D. E. Whiton & Son. In 1882 the business having outgrown its West Stafford quarters, a location was secured in New London and a branch established. The first plant of the Whiton Machine Company in New London was located in the building with the Livesey Roller Bushing Company, which had been vacated by the Brown Cotton Gin Company, and a part of what was afterward the Hopson & Chapin foundry in Howard street. In 1886 the concern was incorporated for $50,000 and the present fine plant on Howard street was erected especially for the industry and to it all of the works were moved. Though this doubled facility for production, additions to the plant have since been made and it is now particularly well adapted for the company's needs and is one of the best equipped in the country for the special lines manufactured. The foundry of the Whiton Machine Company was erected in 1904. Since then various other additions have been made and others are under way. The original plant started with twelve employes ; when it was moved to New London, fifty men were employed; today, when the business is running at capacity, more than two hundred employes are on its pay roll.
The D. E. Whiton Machine Company manufacturers several specialties in machinists' tools, including the original centering machines and lathe chucks, gear cutting machines and drills for special uses. These are all ideas developed by Messrs. D. E. and L. E. Whiton and are nearly all patented, most of the patents being owned by the company. The products of this concern are sold largely through machinery dealers, the company having long established connections with the most prominent firms in this trade in all the leading cities of this country and abroad.
Upon the death of David E. Whiton in September, 1904, the management and full charge of the business fell upon the shoulders of the son, Lucius, who is still at the helm. Mr. Whiton has the honor and distinction of being the first councilman elected under the newly made council-manager plan charter.
The New London Ship and Engine Company is located at Groton, Connecticut, overlooking the beautiful Thames River and New London harbor. It is the pioneer builder of Diesel engines in America, and is today the largest manufacturer of strictly Diesel marine engines in the country. Nelseco is the abbreviated name and trademark of the New London Ship and Engine Company, a component company of the Submarine Boat Corporation. Early in 1908 the United States navy department decided that some means for propelling submarines must be found, other than gasoline engines. The reasons given were: The danger pertaining to the use of gasoline in a space as confined as that in a submarine, and the cost of fuel to operate engines in the large sizes necessary.
This attitude of the department made it necessary for the Electric Boat Company, who were pioneers in submarine construction, to find a suitable heavy oil engine that would be satisfactory for this work. The only practical solution seemed to be in the Diesel engine. .\t that time marine Diesel engines had never been built or operated in the LTnited States.
After careful consideration it was decided to send a representative of the Electric Boat Company abroad to study the engine situation, and to find, if possible, a design suitable for submarine work. This representative, after careful investigation of the European field, decided that the engine designed and built by the Maschinenfabrik Ausburg-Nurnberg A. G., commonly known as the M. A. N., was the best design for submarine work that had been developed up to that time. The exclusive right for the construction of this engine in the United States was purchased of the M. A. N. Company.
It was apparent, however, at this time that the Diesel engine would eventually be highly developed for commercial work, both marine and stationary. In view of this, the New London Ship and Engine Company was incorporated in October, 1910, primarily for the purpose of promoting the manufacture of Diesel engines in the United States, and this company is today the largest concern in the United States devoted almost exclusively to tlie development and manufacture of these engines.
The Nelseco engine has been developed from the engine built and designed in Germany by the M. A. N. Company, but the "Nelseco" has many exclusive features and improvements which have been added by the engineers of the company since its incorporation. The first Diesel-engined "fisherman" in America was the "Manhasset;" the first Diesel-engined yacht in America was the "Idealia," and the first Diesel-engined tug in America was the "Chickamauga," all of which were equipped with Nelseco engines. The first Diesel electric beam trawler in this country was the "Mariner," operating out of Gloucester, Massachusetts. It is driven by twin 240 B. H. P. engines, and has given her owners splendid service.
ground was broken for the construction of the original shop. By July, 1911, the original buildings were completed. Shop operations on engines were then commenced. The plant at this period consisted of an administrative building, machine shop, pattern shop and store room. Of these buildings, the machine shop held an important place, which at that time was 165x100 feet, two stories in height and built of brick and steel. Since that date, this model shop has had a large number of extensions and additions made, and is now over 700 feet long. Not only has this shop been lengthened out, but it has also been made wider, to accommodate other complete units, such as coppersmith shop, screw and bolt shop, and power plant, etc. From the start, the business of the company increased with great rapidity, and it was found necessary even after being in operation for six months, to increase both office and shop facilities.
An idea of the rapid development of this plant during the past ten years may be gained from the fact that today it covers a site of fifty-five acres, including besides its factory units, a model park, modern hotel, and farm.
The Diesel engine, like most new inventions, has had and is still having a hard road to travel. To convince the old steam engineer that this type of engine is better than the one he has been using all his life is more or less difficult, and no matter how much reliable data we can show him he is still skeptical, and it requires a vast amount of missionary work to overcome prejudice, but if the old-fashioned engineer is to stay in business he must give way to modern practice.
For marine purposes, the advantages of the heavy oil engine over the steam engine are even greater than for stationary purposes. For example, the question of weight is an important factor in marine work. Class for class, the oil engine is materially lighter than the combined weight of the steam engine and boiler, and when the weight of the fuel consumed is taken into consideration, the saving in weight is enormous. At the same time, there is a very material saving in space which comes about by the fact that the oil engine installation itself takes up much less room than the steam engine and boilers. In addition, the fuel per given voyage takes up much less space and, moreover, can be stored where coal could be stored, thus utilizing area otherwise wasted. Again, the room used for berthing the fireroom force is saved.
In this case, also, the engines have the great advantage of being able to start very quickly without involving any stand-by losses, and there would be material saving in time and labor in taking aboard fuel. In other words, as compared with a steam-driven ship of the same size and power, the oil engine ship not only costs considerably less to operate, but at the same time her gross earning capacity is materially increased on account of the additional weight and space made available for cargo. These combined advantages increase the net maximum earning capacity of a given ship very materially. Exact figures would vary with different ships and trades, but in all cases the possible increase in net earnings would be very 'irge.
The very latest method of using Diesel engines for ship propulsion is the electric drive. This particular type of installation has many advantages over direct drive. The single screw motorship using only one engine has only one chance in case of a serious breakdown. In the case of the electric drive, several smaller engines would be used to make up the total power and the power of any one of these engines would be sufficient to bring the vessel home at a reduced speed. Another distinct advantage of the electric drive over an engine directly connected to propeller shaft is the question of control. The control of the propeller can be placed on the bridge or at any other point in the ship and is absolutely independent of the engine room, thereby eliminating delay and misunderstanding of signals from the bridge to engine room. Many of the submarines of the United States and foreign navies are equipped with Nelseco Diesels, especially designed for undersea service. Twenty British submarines, built in 1916 by the Electric Boat Company, are equipped with Nelseco Diesels, and the service and cruising radius of the vessels drew official recognition from the admiralty. Perilous voyages of more than 3,000 miles were made to the Dardanelles, the Baltic, and other salients during the war. The Nelseco Diesel is built in its entirety at the works at Groton. Every part is manufactured from the raw material to the finished product. To accomplish this it was necessar}- to build a grey iron and steel foundry, brass foundry, pattern shop, power house, forge shop, a large machine shop, electrical shop, as well as several storehouses, heating plant, and a large administration building.
The bottling works of The M. A. Kane Company was established in 1890 by the late William Kane, at its present location in Jefferson avenue. Mr. Kane managed the business for two years, and upon his demise control of it came to his daughter, Mrs. Charles U. Sauter, who, with her husband, managed the business until two years ago. Upon Mrs. Sauter's death, Mr. Sauter sold the business to Bagdan Brothers of New York, who have since made many improvements in the equipment and the buildings.
The M. A. Kane Company bottle all kinds of soft drinks, from pure spring water, which is secured from a tested spring right inside its building.
The Bottinelli Monumental Company, 19 Reed street, is the successor to Francis D'Avignon, who, for many years kept a monumental works in what is now Tyler Square.
Mr. Bottinelli came to New London from Westerly two years ago last September, buying out the old stand and establishing himself in the D'Avignon quarters. When the property in Bank street was bought by the city for the purpose of making a park, Mr. Bottinelli purchased the property where his present establishment is located and built a modern shop for the conduct of his business. Here will be found the choicest variety of stones for monuments and markers, both cut and uncut. Mr. Bottinelli's workmanship will be found superior to the average, due to his many years experience in the business before locating in New London.
W. R. Perry, the founder of The \V. R. Perry Ice Corporation, commenced the building of a 6,000-ton capacity ice house at Cohanzie Lakes in 1888, and upon the completion of this in 1889, entered into the wholesale and retail ice business in this city. The business steadily grew, necessitating various new storage houses, one of which, for 4,000 tons, was erected near the first house at Cohanzie, another in 1896, for 6,000 tons, was erected at South VVillington, Connecticut. Again in 1901 an addition was made to the latter house, whereby its capacity was increased to 10,000 tons.
Perry ice has ever been known as of first quality, and it has been the aim of this company to always render adequate service, besides giving full value. Especially in emergency cases, the Perry company's special delivery has been found invaluable. Numerous auto trucks and horse-drawn wagons are used to supply this company's demand.
The business was incorporated in 1902. Upon the death of Mr. Perry in 1905, the management of the business devolved upon Courtland E. Colver, former superintendent of the Groton Water and Electric Departments, who has since ably managed the affairs of this successful company. During the past two years the Perry company has opened several small ice selling stations where persons may go and secure their ice needs at a price from which the cost of delivery has been deducted. These have proven exceptionally successful. The present officers of The W. R. Perry Ice Corporation are: Loren E. DaboU, president ; Mrs. Anna B. Perry, secretary, and Courtland E. Colver, treasurer.
The T. P. Cleary Plumbing and Heating Company was first started in New London some thirty years ago, when the late Thomas P. Cleary was in partnership with Joseph V. Jordan, under the firm name of Jordan & Cleary. The store and shop of this concern was located at 139 Main street. After about five years Mr. Jordan withdrew from the firm and it was continued under the firm name by Mr. Cleary. In 1914, Mr. Cleary decided to move his business to his home, and established himself at 93 Ocean avenue, where he continued a successful plumbing, heating, tinning and ventilator business until his death.
To the citizens of New London who are familiar with its industrial development the acquisition of the former Brown Cotton Gin plant by the Babcock Printing Press Manufacturing Company is a matter of interest. It is now a little more than thirty-nine years since the incorporation of the latter company under the laws of Connecticut.
The original plan for building cylinder printing presses in New London was arranged with the Brown Cotton Gin Company by George P. Fenner, who had spent several years in the drafting room of Cottrell & Babcock and of the C. B. Cottrell & Sons. He formed a partnership for that purpose. At the request of his uncle, Nathan Babcock, the partnership was merged into a corporation under the name of The Babcock Printing Press Manufacturing Company, in June, 1882, and at once commenced business, building the presses entirely from drawings made by Mr. Fenner and under his direct supervision.
The first press was completed in about six months and on January 3, 1883, was shipped to W. W. Ames of DeRuyter, New York. This machine has been in constant use for thirty-six years and is still doing good work and owned by the original purchaser. Since then over seven thousand presses have been sold and are in operation in practically all countries of the world.
In 1899, the local shop, employing some two hundred and fifty men, was unable to handle all the business of press building, and arrangements wer«*i made with the Standard Machine Company of Mystic to build certain sizes of machines. Later this work was taken to the Narragansett Machine Company, of I'awtuckct, Rhode Island. Throughout the years of its manufacture, the Babcock Printing Press, of whatever style or design, has established a reputation for strength, reliability, economy, accuracy and speed that has placed it in the offices of the leading printers in every State in the Union, Alaska, the Hawaiian Islands, Philippine Islands, Canada, Mexico, South .America - many European countries. South Africa, India, Dutch East Indies and China.
The unquestioned excellence of the Babcock Printing Press is due to the untiring industry and inventive genius of Mr. Fenner. Through all the years of the establishing of the business, a fourtcen-hour day was the ordinary day's work for him, and in fact there was never any limit to the time he was willing to give to the interests of the business. Between 1882 and 1915 he was granted about one hundred patents, upon valuable inventions for improving printing machinery, all of which are the property of the company.
With the purchase of the shop in which the machines of the company have been built since its incorporation. The Babcock Printing Press Manufacturing Company is re-established, and upon a manufacturing basis that cannot fail to bring increased success. The officers of the company express their appreciation of the fine spirit which has actuated every man connected with the press work during the years of their connection with the company and particularly to those who have so loyally and unselfishly served to the utmost during the three years when the company suffered the loss of invaluable service in its management, and the disastrous World War made it the patriotic duty of all business manufacturing not for war purposes to be curtailed to the utmost limit. Throughout the trying period of the war the business was successfully maintained and is now efficiently organized for progressive development upon a constantly increasing scale.
The present officers are: President and manager, James E. Bennet; treasurer, Mrs. George P. Fenner ; secretary and assistant treasurer, Wilfred D. Wells; chief engineer, Fred S. English; general superintendent, Howard L. Hetherington ; sales manager, Charles W. Britcher.
James E. Bennet is very prominent in the printing trade, being secretary of the Printing Press Manufacturers' Association of the United States, and has been connected with the company for about twelve years. Wilfred D. Wells has been connected with the company for over thirty years, and F. S. English, Howard Hetherington and C. W. Britcher for nearly twenty years each. These men are thoroughly trained to carry on the business to a greater
The property of The Babcock Printing Press Manufacturing Company covers about seven acres of land on which are buildings with floor space aggregating about 180,000 square feet. The foundry work turned out by this plant has been for years considered of exceptional quality. The Babcock Printing Press Company's plant ranks as one of the finest machine building plants in New England.
The foregoing accounts give only a very partial view of the process by which New England thrift and perseverance and New England business methods have succeeded in developing the county.
In Norwich, the J. B. Martin Company produces one million yards of velvet annually; the U. S. Finishing Company prints 85 million yards; the Totoket Mills have a capacity of 2,000,000 yards a year; The Falls Company, five and a half million yards; the Shetucket Company, six million yards; the Ponemah Mills twenty-two million yards a year. The Aspinook Company at Jewett City, the Ashland Cotton Company, the Slater Mills, the Palmer Brothers' Quilt Mills at New London, Montville and Fitchville, with a capacity of 14,000 quilts a day, and at Baltic the huge cotton mills, combined with many other mills throughout the country, furnish occupation for a considerable part of the total county population.
The casual visitor will see that these mills are more than manufacturing plants ; they are little worlds in themselves, with a community spirit, with recreations, civic organizations, social activities that promote the welfare of all members of the families of the villages.
It is not the purpose of this article to make comparisons or to enter into disputed questions as to the relation of labor and capital, but for the sake of conveying to the reader a true picture of a New England manufacturing village, the following account of life in Taftville is presented. Inasmuch as the Ponemah Mills Company is by far the largest in the county and one of the largest in the country, it presents an interesting picture of the co-operative spirit on a large scale.
The Ponemah Mills was chartered in 1866 under tht name of the Orray Taft Manufacturing Company, by Mr. E. P. Taft, and associated with him were Cyril Taft and James S. Atwood, who in company with Mr. Moses Pierce formed the Cecum Power Company. The charter, secured in 1866, with later amendments is broad in its character, including rights in four towns - Franklin, Sprague, Bozrah and Norwich, and is a proof of the broad vision of its founder. In 1867, after some financial difficulties, a reorganization took place, and John F. Slater, Edward Chappell and Lorenzo Blackstone became associated with the original members.
The first mill, now called Mill No. i, had originally 80,000 spindles, all American made. The preparatory machinery was originally American, but replacements have been imported from England. The mill from the first made fine goods, such as had previously been imported into the United States from
Comml'Xitv Activities 503
Manchester, England. Fine lawns, organdies, mechanical cloths and fancy goods for ladies' wear, men's shirtings, ginghams, mixed silk and cotton goods, and tire yarns for the highest grade cord tires are a few of the products of the company. The original 80,000 spindles have been increased to 161,000 and the original 1500 looms to over 3800.
The mills now include Mill No. i, a five-story structure 750 feet by 75 feet, with an ell; Mill Xo. 2, built in 1880, 500 feet by lOO feet; Mill No. 3, 200 feet by 120 feet; Mill No. 4, built in 1910, 600 feet by 200 feet, with 2300 looms. For power, the mills have 2500 horsepower developed at full water by its water power, and the difference of 1500 horse power needed for operation is developed by steam, which develops further any deficit in water power due to low water.
During the war, the mill was busy making cloth for balloons and airplanes, etc., on government work. Today one may see in the office the first sample made to match the linen sample submitted by the government. This substitute for linen was made necessary by the loss of the vast linen supplies at Riga after the Germans had captured that port. This original sample was 36 inches wide, 68 by 68 threads to the square inch, weight four yards to the pound, and made from three-ply 80 yarns for warp and filling. Its strength may be seen from the required test of over 70 pounds to the square inch before breakage. It was furthermore almost non-stretchable For a number of months before and during the war, the mills operated as many as 1,000 looms on aircraft cloth, balloon and airplanes. It was estimated that one loom producing about 150 }ards of airplane cloth a week would only provide for the wear and tear supply for one airplane.
To a novice there is a fascination in tracing the steps bj' which the cotton passes on through the bale breaker and blender, the picking and carding machinery, the drawing and doubling process, the combers ever drawing and parallelizing the fibres, the fly frames consisting of slubbers, intermediates and jacks, the ring frames which draw and twist and thereby spin the thread, the spoolers, the warjjers, the slashers which starch or dress the yarn so that it may resist the friction and wear of the loom in the weaving process. To an untrained observer it seems incredible that a pound of cotton can be spun out to a length of nearly one hundred miles. On the whole, the most wonderful thing about the material part of the manufacturing process is the combination of strength and delicacy shown in the machiner3% the result of long experience, countless experiments, the long evolution of inventive genius combined with farsighted business sagacity. The evolution of the cotton industry is one of the most interesting chapters of human progress. Such a history must be written by the expert. But what these steps have meant to mankind in the way of cheaper and better clothing, in furnishing of productive labor for many thousands of people, in the indirect benefits conferred upon many other forms of business, even the casual obsers'er may perceive.
The Poncmah Mills form the nucleus of a whole community life. In its mills, its homes, its farms, its reservoirs, its electric plant, its many community activities, it is a model village, interesting as a community no less than a manufacturing plant. The company owns five hundred tenements, with au estimated population of 3500. It owns four miles of streets, eight miles of sidewalks, covering nearly a square mile of land. It has its own water supply for fire protection - each hydrant has about 75 pounds of pressure - its own electric power. It sells some water and electricity to adjacent residents who seek this convenience. It has two reservoirs, one of 86,728,000, one of 24,445,- 500 gallons. It has constructed a complete sewerage system of over eight miles in length ; every house has modern plumbing. The dairy farm contains an accredited herd of tested Holsteins and furnishes bottled milk at current rates. A co-operative boarding house furnishes adequate and inexpensive board for such residents as do not take houses.
The financial offices are in Providence. The secretary and treasurer is Mr. J. A. Atwood, who is also treasurer and large owner in the mills at VVauregan and at Danielson. The payroll is $30,000 per week, about onefifth the total payroll of all the industries in Norwich. The average wage of operatives, without including oversight, salaries, etc., is $20 per week for all workers.
The annual product is approximately twenty million yards of cloth of a value of five and one-half million dollars, one-fifth of the whole manufactured product of Norwich. In the management of the mills, efficiency is revealed not only in the product of the mills but also in the no less important work of the community life as a whole. In general it is the policy of the management to do whatever is for the welfare of the village. If the village "pays for itself outside the mill fence," it is satisfied, and does not aim to make a profit from the various community enterprises enumerated above. For instance, it is estimated that many of the mill houses yield less than two per cent on the cost of construction. The rents charged are surprisingly low. A seven-room tenement rents for $1.66 a week, with running water and sanitary plumbing. If the tenants desire a bathtub, a charge of five cents a week is added. If the tenants desire to use steam heat, twenty cents a week extra is charged; for electric lighting, five cents per socket is charged for electricity used from the middle of the afternoon to midnight ; no meters are installed. Young couples or old, with one worker in the family, may secure a tenement in a four-family house for $1.18 per week. For a two tenement seven-room house (standard type), the rental, including light and water and bath room, is $2.50 per week.
Statistics regarding wages are of interest: In 1899 the average weekly wage for one class of operative was $11.24 for 58 hours' work. In 1916 this had risen to $17.09. At the peak of war wages, the average wage of these operatives in 1920 was $38.15. Today the average wage is $29.49. The lengtn of the working week was lessened in 1913 to 55 hours, and as a war requirement or condition in 1919 to 48 hours.
The attitude of the company towards the help is in all things benevolent and co-operative; accommodations are furnished for all the many clubs that exist on the initiative of the workers. The management believes, and very
Commtxitv Activities 505
Ponemah Mills provides two free beds at the William W. Backus Hospital for all its villagers. These beds arc of special help in maternity cases, and in the many other cases discovered by its trained nurses. Two trained nurses, with proper rooms for emergency use, exercise a most helpful supervision of the villagers. Whenever an illness occurs in a home the case is at once reported to a nurse, who before noon visits the home, provides for first aid, advises a physician in case of need, and thus is a great help in the prevention as well as the cure of disease. A complete card index of all cases is filed, and a detailed report is made at stated intervals. The office keeps its hand in this way on the pulse of its village for the betterment of all its residents. In the past year over eight thousand special cases for approximately 4000 individuals were personally treated.
The village has its ov.n Red Cross Chapter - this of itself is unusual. The Chapter by its annual roll call raises enough to support one free bed at the William W. Backus Hospital, to do a useful home service work, and in general to offer help to any one in the community who may be in distress.
The company, as might be expected from its other activities, is a cheerful contributor to every enterprise that tends to uplift the villagers. As one visits the plant and realizes that the Ri]iley Farms was sixty years ago a rural, undeveloped waste; that the original John Sullivan, who helped cut away the brush for the first survey, is still a resident of Taftville; as one views the orderly and systematic arrangement of the village, the well kept homes, the prosperous operatives, it becomes evident that the gap between capital and labor, if it is ever to be bridged, will be crossed by such organizations as Ponemah Mills. The care for the welfare of the operatives, with the freedom given them in initiating their own social life, the efficient business system by which community enterprises are managed, furnish an object lesson in good government that might be studied with great profit by many of the municipalities of our land.
It is also true of many other industries in New London county that the welfare of the helpers is of first importance to the administrators. Only lack of space prevents us from describing in detail some of the other manufacturing concerns with which our county is so well supplied. As the children of these manufacturing villages enter our schools they come to have the true American spirit. And the hope of New England, composed today of a popu. lation which is largely of foreign parentage, consists in perpetuating New England ideals, even if the old New England families are declining relatively in numbers.
Provenance
Text from A Modern History of New London County, Connecticut;, published 1922, in the public domain in the United States and digitised by the Internet Archive.