Built in under the United States Housing Authority, DeSoto Homes is significant as the first federally funded public housing project in Rome, Georgia. Building Numbers A-1 through A-13 are the thirteen examples of the Type A Plan Building in the DeSoto Homes housing project. The Type A Plan Building is a one-story building with four, one-bedroom units. DESOTO HOMES, BUILDING NOS. A-1 - A-13 (Charles Hight Homes) HABS No. GA-2403-B (Page 2) PART I. HISTORICAL INFORMATION A. Physical History: 1. Date of erection: 2. Architects: The associated firms of Cooper and Cooper and Odis Clay Poundstone. 3. Original and subsequent owners: Housing Authority of the City of Rome, to Northwest Georgia Housing Authority, to present. 4.
Original and subsequent uses: Public housing units for the Housing Authority of the City of Rome and Northwest Georgia Housing Authority. 5. Builder, Contractor, Suppliers: Contractor: Griffin Construction Company, Inc., Atlanta, Georgia Landscape Architect: William C. Pauley, Atlanta, Georgia Structural Engineer: Armstrong, Mechanical Engineer: A.L. Lindstrom, Electrical Engineer: Bush, Civil Engineer: Jere Dodd 6.
Original Plans and construction: The Commission of the Housing Authority of the City of Rome approved the working drawings submitted for DeSoto Homes on June 12, The project contractors, Griffin Construction Company, Inc., won the base bid contract of Site clearance and construction of DeSoto Homes began in early September and was completed in the fall of Aside from the replacement of the original doors and windows, all Type A Plan Buildings retain their original appearance and interior plans. 7.
Alterations and Type additions: The exterior stucco finishes on all Type A Plan Buildings were repaired and repainted in and again in As part of Phase I of the Rome Housing Authority s building modernization plans during the early aluminum screen doors were replaced and rear canopies and gutters were also changed. During the larger CIAP modernization program in the early new bathroom fixtures, tile floors, and sheetrock were installed, as were new kitchen cabinets. The original steel casement windows in each building were replaced with double and tripartite anodized aluminum DESOTO HOMES, BUILDING NOS. A-1 - A-13 (Charles Hight Homes) HABS No. GA-2403-B (Page 3) sash windows.
Original gas heaters were replaced with the existing wall furnaces and water heaters were upgraded and relocated to utility closets within the kitchens. Subsequent renovation work completed during the included interior improvements (painting, new bathroom tiling) and additional gutter and appliance replacements. B. Historical Context The Housing Authority of the City of Rome developed DeSoto Homes as a segregated, federally subsidized low-rent housing project for white residents.
DeSoto Homes, along with Altoview Terrace, which was built for African-American tenants, were two of the earliest housing projects built in Georgia following the passage of the federal United States Housing Act in and enactment of state enabling legislation for the creation of local public housing authorities in Located in the Fourth Ward section of Rome, the project was designed in a Spanish Colonial Revival style by the associated Atlanta firms of Cooper and Cooper and Odis Clay Poundstone. The Griffin Construction Company, Inc., Atlanta, Georgia was awarded the construction contract for the project with a low bid of Site clearance and development began in September and was completed by October th Tenants began moving into the new units by November 11 of that year.
The twenty-eight building Desoto Homes project is located within an urban setting and contains 148 residential units and a public Administrative Building. The one- and two-story buildings are symmetrically arranged to create multiple vistas. The landscaped site plan, designed by landscape architect William C. Pauley, is laced with concrete walkways, small lawns of green space, and a central open playground area. All thirteen Type A Plan Buildings in DeSoto Homes were constructed as part of the original development between and Located along the northern and southern perimeters of the site, the Type A Plan Buildings are one-story buildings containing four, one-bedroom units.
Each building was renovated as part of the modernization plans of the and which resulted in the replacement of much of the interior fabric in all units, removal of the original steel casement fenestration, and installation of metal front doors, screen doors, and rear canopies. Between and the lower working class families and individuals comprised most of the residents in DeSoto Homes. By the however, the majority of tenants were elderly. In the project was renamed Charles A. Hight Homes in honor DESOTO HOMES, BUILDING NOS. A-1 - A-13 (Charles Hight Homes) HABS No. GA-2403-B (Page 4) of the businessman and longstanding commission chairman of the Housing Authority of the City of Rome.
By Charles Hight Homes was determined to be functionally obsolete and was designated for potential redevelopment by the Northwest Georgia Housing Authority (formerly the Housing Authority of the City of Rome). The complex currently stands vacant. Part II. ARCHITECTURAL INFORMATION A. General Statement 1. Architectural character: There are thirteen Type A Plan Buildings located with the DeSoto Homes project. All were built in as single story, duplex unit dwellings with Spanish Colonial Revival style architectural detailing. Each apartment has a three-and-a-half room standardized floor plan featuring a kitchen with a utility closet, a living room, one bedroom, and a full bathroom. 2. Condition of fabric: The buildings are in good structural condition.
Despite the replacement of the historic windows and doors and renovation of much of the interior fabric, the original appearances and floor plans of the buildings are intact. B. Description of Exterior: 1. Overall dimensions: A Type A Plan Building is one story in height with a symmetrical facade. It measures 82 3 in length and has an overall depth of 26 4 . Refer to plans for detailed measurements. 2. Foundations: Depending on the slope of the building site, the foundation may be composed of 8 thick concrete block wall footings supporting a reinforced 8 concrete slab or soil bearing reinforced concrete slab with a 4 thickness. Metal grated openings provided access to DESOTO HOMES, BUILDING NOS. A-1 - A-13 (Charles Hight Homes) HABS No.
GA-2403-B (Page 5) partial crawl spaces are located on the building s ends. 3. Walls: Walls are 8 thick structural terra cotta block, also known as hollow tile block, covered with a grayish-blue colored painted stucco finish. 4. Structural Systems, framing: The Type A Plan Building is constructed of structural terra cotta block masonry with a 2 x 6 trussed frame roof. 5. Porches, stoops: The front elevation of a Type A Plan Building has two shared flat canopy porches with concrete slab stoop foundations. Two 4 pipe columns support each porch roof. Two single and one shared concrete stoops with cantilevered metal canopies are at the back door entries. 6. Chimneys: Each Type A Plan Building has a total of four chimneys with two interior end chimneys and two interior ridge chimneys.
All are transversely placed double flue vents coated with a stucco finish 7. Openings a. Doorways and doors: Each building has four, evenly spaced single-entry doors accessing each apartment unit on the front elevation. The back doors are asymmetrically placed with the two interior units grouped together. All existing exterior doors are flat metal replacements with aluminum screen doors. b. Windows and shutters: The fa ade of each building has four window openings, including corner windows located at each end of the elevation. The rear of the building has eight windows featured in three different sizes. Each building end also has one window in addition to the corner unit. Although Type A Plan Buildings retain the sizes and DESOTO HOMES, BUILDING NOS.
A-1 - A-13 (Charles Hight Homes) HABS No. GA-2403-B (Page 6) locations of the original fenestration, all current windows are non-historic two-over-two, anodized aluminum sash replacements of the historic steel casement multi-light windows. 8. Roof: a. Shape, covering: Each Type A Plan Building is covered with a low-pitched gable-on-hip roof with wood louvered vents separated by the chimneys at the gable ends. All roofs are covered with original red slate tile shingles. b. Cornice, eaves: The Type A Plan Building roof has a slight eave overhang that is boxed with continuous brick dentil molding of alternating stretcher and header courses along the cornice. C. Description of Interior: 1. Floor plans: Type A Plan Buildings have a linear-massed plan that is four units wide and two units deep.
Each building contains four, three-and-a-half room residential units. The apartment of each standardized floor plan has a linear kitchen with an enclosed utility closet, living room, a hallway and coat closet, one bedroom with a closet, and one bathroom. Adjacent interlocking apartment plans are reversed; therefore, the bedrooms in the two end units are located at the rear of the building off of the hallway, while bedrooms in the two interior units are placed at the front of the building and are accessed from their respective living room areas. 2. Stairways: The buildings are single story and have no stairway. 3. Flooring: DESOTO HOMES, BUILDING NOS. A-1 - A-13 (Charles Hight Homes) HABS No.
GA-2403-B (Page 7) All buildings have asphalt tile flooring applied over concrete slab throughout, save for bathrooms, which have replacement square ceramic tile. 4. Wall and ceiling finish: All remaining original walls retain a plaster finish; however, due to the extensive renovations made to the DeSoto Homes housing project during the mid many of the Type A Plan Building s walls and ceilings are sheetrock with a painted finish. 5. Openings: a. Doorways and doors: All Type A Plan Buildings appear to retain their original interior two-panel wood doors. Interior closet doors were added during modernization work in the Doorways have 3 1/2 wide, plain wood casing with a painted finish. b.
Windows: Interior window surrounds are generally devoid of casing and detailing save for unadorned, blocked stools and aprons with sheet metal capping and a painted finish. 6. Decorative features and trim: Developed as low-income housing units, the apartment interiors of Type A Plan Buildings are minimally ornamented. All interior partitions and doors are painted a uniform off-white. One of the few distinctive features is painted black clay tile base molding found in each room, save for the bathroom. 7. Hardware: Most interior doors retain their original brass doorknob and mortis lockset hardware although examples of cylindrical lock metal door sets on closet doors installed in the or are also present. 8. Mechanical Equipment: a.
Heating, air conditioning, ventilation: DESOTO HOMES, BUILDING NOS. A-1 - A-13 (Charles Hight Homes) HABS No. GA-2403-B (Page 8) Apartment units in each building have been updated to include modern central HVAC and wall furnace heating systems. The original water heaters have been replaced and relocated within utility closets next to the kitchen. b. Lighting: Apartment units in each building have been updated to include adequate electrical wiring systems with modern breaker panels, wall outlets, and overhead lighting fixtures in the kitchen, living room, and hallway areas. c. Plumbing: All Type A Plan Buildings have plumbing systems installed as part of the original development.
Kitchen sinks, and bathroom fixtures have been updated over time during the and The original water heaters have been replaced and relocated within utility closets next to the kitchen. D. Site: 1. Historic landscape design: The thirteen Type A Plan Buildings line the northern and southern boundaries of the DeSoto Homes housing project complex. Building Numbers A-6 and A-7 are oriented to the east on North Fifth Avenue and Building Number A-5 faces the North Fourth Avenue interior drive. The remaining Type A Plan Buildings are oppositely oriented across an open yard. A series of horizontal paths connect to a vertical main concrete walk in the courtyards of the rear facing buildings.
Angled automobile parking areas for the residents are located at north and south ends of North Fourth Avenue and Keelway Drive. A semi-circular lot is also located in the area of the former spray pool behind the Administration Building. Part III. SOURCES OF INFORMATION Existing architectural and engineering drawings, historic views, documents and records, and interviews were used to compile this information. Much of the material was located at the Authority s Archives or within the Maintenance Department s files. For a DESOTO HOMES, BUILDING NOS. A-1 - A-13 (Charles Hight Homes) HABS No. GA-2403-B (Page 9) full bibliography, please refer to Part III Sources of Information for DeSoto Homes, HABS No. GA-2403. Part IV.
PROJECT INFORMATION This documentation was prepared to assist the U.S Department of Housing and Urban Development and the Northwest Georgia Housing Authority in meeting their Section 106 responsibilities under the National Historic Preservation Act as amended. After consultation with the Georgia Historic Preservation Division the Department of Housing and Urban Development (HUD) considers the housing to be eligible for listing in the National Register of Historic Places based on Criterion A, namely, events that have made a significant contribution to the broad patterns of our history. The Authority, as administrator of federal funds allocated for this purpose, wishes to redevelop the site and its plans will have an adverse effect on the eligible property.
Thus HUD, the Authority, and HPD entered into a Memorandum of Agreement in to complete a HABS Level II documentation of the DeSoto Homes. In addition, the Authority has elected to complete a second recordation project that documents the historically-associated Altoview Terrace. DeSoto Homes is documented in HABS No. GA-2403 while Altoview Terrace s number is HABS GA-2419, but the documentation has not been submitted to HABS as of 30 September