American Flat Mill, Assay Office, Gold Hill

Source document Quoted word for word from HAER NV-48-G. Not written, edited or summarised by this site.

One mile northwest of Silver City, Storey County, Nevada. The American Flat Mill Assay Office is located at latitude: longitude: The coordinate represents the center point of the American Flat Mill Assay Office. This coordinate was obtained on December 6, by plotting its location with Geoplaner (www.geoplaner.com). The accuracy of the coordinate is +/- 1 meter. The coordinate s datum is WGS 84 (World Geodetic System There is no restriction on releasing the location to the public. Present Owner/ Occupant: United States Department of Interior, Bureau of Land Management

Source document Quoted word for word from HAER NV-48-G. Not written, edited or summarised by this site.

The American Flat Mill Assay Office is a contributing resource of the American Flat Mill District, an eight building silver ore processing mill complex. The American Flat Mill is significant under National Register Criterion A for its historical importance as the last remaining remnant of what was once the United Comstock and the Comstock Merger mining operations. The mill and its associated mining activities represented the last large scale underground mining efforts on the Comstock. Other early twentieth century mining activities on the Comstock were either much smaller in scale, or reflected the use of alternate technologies such as open pit mining or dredging. The American Flat Mill is also a contributing element to the Virginia City National Register District under Criterion A.

The American Flat Mill is eligible for listing on the National Register under AMERICAN FLAT MILL, ASSAY OFFICE (Comstock Merger Mine Mills) HAER No. (Page 2) Criterion B at the local level due to the early and active participation of Royce Hardy and Alex Wise. These two local men were mining engineers who were involved in the formation of the United Comstock Mines Company and worked with the company until its demise in Wise began developing the middle mines which became a key part of the Comstock Merger operation. The American Flat Mill is the largest remaining physical reflection of their actions on the Comstock.

The American Flat Mill is eligible for the National Register under Criterion C at the national level as an early representative of the International Style of architecture, which stressed the metaphor of form following function, rejection of ornament, and use of modern building materials, including reinforced concrete, structural steel, and large window panels. All of these characteristics are strongly expressed throughout the American Flat Mill.

Source document Quoted word for word from HAER NV-48-G. Not written, edited or summarised by this site.

HAER documentation of American Flat Mill is part of the measures to mitigate the adverse effect that will result from demolition of all buildings at the site. The BLM has proposed the demolition of the mill for public safety reasons. AMERICAN FLAT MILL, ASSAY OFFICE (Comstock Merger Mine Mills) HAER No. (Page 3) PART I. HISTORICAL INFORMATION A. Physical History 1. Date of Erection: 2. Engineer: Walter L. Reid, consulting milling engineer; A. J. Weinig, metallurgist; Lee L. Fillius, superintendent of construction; B. P. Little, chief draftsman in charge of engineering office; and Robert McFarland Doble, in charge of power and electrical engineering. 3.

Original and Subsequent Owners, Occupants, Uses: United Comstock Mines Company, Comstock Merger Mines, Inc.(subsidiary of Gold Fields America Development Company/New Consolidated Gold Fields, of London), 4. General Contractor: United Comstock Mines Company. 5. Original Plans and Construction: No original plans of the Assay Office are known to exist. 6. Alterations and Additions: None known. PART II. STRUCTURAL/DESIGN/EQUIPMENT INFORMATION A. General Description 1.Character: The Assay Office was a two-story rectangular building constructed of reinforced concrete. The entrance is located on the southwest side and has a small entrance porch with cast concrete pillars with cast moldings. The second floor has been completely demolished. 2.

Condition of Fabric: The Assay Office is presently in ruins. Only the reinforced concrete floors and concrete walls remain. AMERICAN FLAT MILL, ASSAY OFFICE (Comstock Merger Mine Mills) HAER No. (Page 4) B. Description of Exterior 1. Overall Dimensions: Approximately 66' long and 38' wide.1 2. Foundations: Reinforced concrete. 3. Walls: Reinforced concrete walls and structural members on the first floor. The second story consisted of a metal frame with metal lath and plaster covering both interior and exterior walls. These were destroyed upon salvage of the metal framing members in 4. Structural System, Framing: Reinforced concrete. Steel second floor and roof framing. 5. Openings: Original openings consisted of Fenestra steel sash windows supported by reinforced concrete frame. 6.

Roof: The roof is no longer extant. It was originally sheathed with galvanized corrugated steel. C. Description of Interior 1. Floor Plan: The ground level is divided into two large rooms separated by a hallway. The hallway has a concrete stairway to the second floor which is no longer extant, but was constructed of a metal frame clad with lath and plaster. 2. Flooring: Reinforced concrete. 3. Wall and Ceiling Finish: Interior walls and ceiling were originally finished with metal lath and plaster. These finishes were destroyed during salvage efforts in D. Site Layout The Assay Office is located southwest of the Precipitation and Refining Building and is the first building encountered upon arrival to the site. 1 Walter L.

Reid "Design and Construction of United Comstock Mills," Mining and Metallurgy 191 AMERICAN FLAT MILL, ASSAY OFFICE (Comstock Merger Mine Mills) HAER No. (Page 5) Part III. OPERATIONS AND PROCESS The Assay office was used for testing and sampling of ore and bullion. The building contained equipment for grinding and testing ore samples, as well as a furnace room, laboratory and a mill superintendent's office. PART IV. SOURCES OF INFORMATION A. Architectural Drawings Selected drawings depicting process flow charts, plans and sections of buildings at the mill may be found in: George Young, "New Treatment Plant of United Comstock Mines," Engineering and Mining Journal 114 B.

Early Views Early views of the American Flat Mill are available from the Nevada Historical Society, Special Collections and University Archives Photographs at the University of Nevada, Reno. The views during operation range in date from approximately to with some later views dating from the and representing a total of 86 views. An additional private collection owned by Mr. Joseph Curtis of Virginia City represents approximately 50 views of the mill during its operating years.

Some unique views of the building and its machinery may be found in George Young, "New Treatment Plant of United Comstock Mines," Engineering and Mining Journal 114 One aerial view of the mill ruins from is available from the University of California, Davis, in the Eastman's Originals Collection, Department of Special Collections, General Library. C. Interviews Glass, M. Royce Aller Hardy: Reminiscence and a Short Autobiography. Oral History Program, University of Nevada, Reno, AMERICAN FLAT MILL, ASSAY OFFICE (Comstock Merger Mine Mills) HAER No. (Page 6) D. Selected Sources Bray, John L. The Principles of Metallurgy. Boston: Ginn and Company, The Athenaeum Press, Gavazzi, I., and R. Kendall.

American Flat: Stepchild of the Comstock, Virginia City, Nevada: Mark Twain Bookstore, Goin, P., and E. Raymond. Changing Mines in America. Santa Fe, New Mexico: The Center for American Places, Hamilton, E. M. Manual of Cyanidation. New York: McGraw-Hill Book Company Inc., Hardesty, D. National Register Evaluation of the East Yellow Jacket Mine and the American Flat Mill Sites, Storey County, Nevada. Report prepared by University of Nevada, Reno. Submitted to Bureau of Land Management, Carson City Field Office, Kendall, Robert E. "American Flat: Stepchild of the Comstock Lode Part II," Nevada Historical Society Quarterly Lincoln, Francis Church. Mining Districts and Mineral Resources of Nevada. Reno: Nevada Newsletter Publishing Company, Morse Brothers Machinery and Supply Company.

"Mining and Milling Machinery of The Comstock Merger Mines and Mills at Virginia City, Nevada" Catalog by the Morse Brothers Machinery and Supply Company, Denver, Virginia City, Reno, ca. Located in the Special Collections and University Archives, University of Nevada, Reno. Reid, Walter L. "Design and Construction of United Comstock Mills," Mining and Metallurgy 191 Weinig, A. J. "A General Study of United Comstock Metallurgy," in Papers Related to the Geology, Mining, Metallurgy and Milling of the Comstock Orebodies of the United Comstock Mines Company, San Francisco: American Institute of Mining and Metallurgical Engineers, Young, George.

"New Treatment Plant of United Comstock Mines Company," in Engineering and Mining Journal 114 AMERICAN FLAT MILL, ASSAY OFFICE (Comstock Merger Mine Mills) HAER No. (Page 7) Zeier, Charles, Michael Drews and Ron Reno. An Architectural and Archaeological Inventory of the American Flat Mill, Storey County, Nevada. Clinton, Tennessee: Zeier and Associates, E. Likely Sources Not Yet Investigated Newspaper clippings on file at the Nevada Historical Society, Subject Card Index: "American Flat".