Building was constructed in as part of the original construction within the administrative area of the China Lake Pilot Plant facility. Built as an office building, it is a contributing building in the China Lake Historic District. While inferior in its design qualities to the major buildings in this area it is nonetheless consistent with the general character of the area and retains a high degree of integrity. Naval Ordnance Test Station Inyokern. China Lake Pilot Plant, Office Building (Naval Air Weapons Station, China Lake Pilot Plant, Office Building) HABS No. CA-2774-C (Page 2) PART I. HISTORICAL INFORMATION A. Physical History I. Date of erection: 2.
Engineers and Consulting Architect: The design of China Lake Pilot Plant facility was not handled under the master architect-engineer contract with Stafford, Davies. and Gogerty. designers of most of the Naval Ordnance Testing Stations. Instead. the Navy hired the engineering firm of Holmes and Narver and in collaboration with Oliver G. Bowen. consulting engineer and Palmer Sabin. consulting architect both hired by California Institute of Technology (CalTech), they produced the design of the facility. Published histories of the construction of the plant emphasize the degree to which CalTech scientists controlled the design process for this plant. The design of Building is attributed to Oliver G. Bowen who.
as noted, was under contract with Ca!Tech for design of buildings associated with the university's work in the Navy's rocket program. Minutes from meetings indicate that Palmer Sabin was also involved in this design work. Palmer Sabin was a private architect who worked from an office in Pasadena. Credited chiefly with the design of residential buildings. Sabin was under contract with CalTech throughout its work with the Navy during World War II. It is likely that Sabin was most heavily involved in developing the architectural theme or program for the administrative complex. 3. Original and subsequent use: The building has been used as an office building since its construction. 4. Builder: Haddock. 5.
Original plans and construction: There are limited plans available for this building which only include a rough floor plan and section of the building. They in general provide little information about the original appearance of the building. 6. Alterations and additions: There have been no major alterations to this building. Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Office Building (Naval Air Weapons Station, China Lake Pilot Plant, Office Building) HABS No. CA-2774-C (Page 3) B. Historical Context The China Lake Pilot Plant was established in to replace a smaller test plant at Eaton Canyon near Pasadena that was operated by the California Institute of Technology (CalTech) to test manufacturing method for ballistite, a material used as a solid propellant for rockets.
Although not intended for large-scale production, the test plant in Pasadena actually produced tons of propellant between and The new facility at China Lake was set up to make an even greater production, while avoiding safety problems associated with an ordnance assembly plant in an urban area. The China Lake Pilot Plant was also designed for research into new materials and production methods, other than the established materials and methods used in large-scale production of rocket motors. The history of this facility is presented in greater detail in HABS No. CA-2774. Building is one of four contributing resources in the China Lake Pilot Plant Historic District and was built as part of the original group of buildings in the administrative area.
The plant was sufficiently distant from the Main site (located a mile east of this building) that it was necessary to construct a small administrative and support complex at the entrance of the plant area. Sixteen buildings were planned for the area including office buildings, warehouses, a carpenters shop, machine shop, maintenance shop, fire station, a solvent building, Marine barracks, a lunch room, a laundry room, a battery building, and a telephone building. These buildings functioned as a "village" and are not substantially different from the administrative and service buildings at the Main Site at China Lake. Most of the buildings in this service area, including Building were constructed of wood frame with exterior stucco walls.
They were structurally and architecturally different from buildings constructed in the industrial sector, which were almost always built of reinforced concrete cast in place around the machinery. Naval Ordnance Test Station lnyokern, China Lake Pilot Plant, Office Building (Naval Air Weapons Station. China Lake Pilot Plant, Office Building) HABS No. CA-2774-C (Page 4) PART II. ARCHITECTURAL INFORMATION A. General Statement: I. Architectural character: Building I I 080 is simple in design with an International style motif similar to the other service buildings at the China Lake Pilot Plant site. 1 Condition of Fabric: Building retains a high degree of integrity and a high condition of historic fabric. B. Description of Exterior: I.
Overall dimensions: This office building is rectangular in plan with a small addition located on the south side. The main building measures approximately I 00 feet long with eight bays located on the front side and is 30 feet wide with one bay on both the north and south sides. It is one story in height approximately 20 feet high. ? Foundation: This office building rests on a poured concrete slab foundation with unfinished floors. 3. Walls: The walls are finished with stucco although the construction drawings and field investigation did not determine how the stucco was attached. 4. Structural system. framing: Structural systems for this building are unknown. 5. Openings: a. Doorways and doors: There are two doors on the northern and southern side of the building.
They are single leaf doors. b. Windows: There are eight groups of paired two over two double hung windows along the west and east sides. 6. Roof: a. Shape, covering: Covered with a shallow gable roof sheathed with an unknown sheathing material. b. Cornice, eaves: There are large overhanging eaves supported by triangular kneebraces. Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Office Building (Naval Air Weapons Station, China Lake Pilot Plant, Office Building) BABS No. C A-2774-C (Page 5) C. Site: 1. General setting and orientation: The China Lake Pilot Plant was sited in the area of the base for reasons of safety. The buildings are widely dispersed for the same reason. Because the buildings are spread out over such a wide area.
the boundaries of this historic district include many acres of undeveloped land. This land has always been used for miscellaneous purposes, chiefly the storage of equipment and material used in the experiments and production facilities. ' Historic landscape design: There is no evidence that the original planners of the China Lake Pilot Plant made any attempt to develop a formal landscape in the plant area. Instead, some minor efforts were made to beautify the administrative area, although most of these appear to post- date the period of significance for the historic district. Within the processing area, the focus was on the widely-dispersed siting of the processing buildings as well as the provision of safe corridors for moving the processed material. 3.
Outbuildings: There are no outbuildings associated with Building