This project is part of the Historic American Engineering Record (HAER), a long-range program to document historically significant engineering and industrial works in the United States. The Heritage Documentation Programs of the National Park Service, U.S. Department of the Interior, administers the HAER program. The project was prepared under the direction of Todd Croteau (HAER Maritime Program Coordinator). Crystal Olin (HAER Intern Architect) generated the vessel drawings. Jet Lowe (HAER Photographer) produced the large-format photographs. Special thanks go to Erhard Koehler (U.S. Maritime Administration) whose assistance greatly benefited this project. Mission Santa Ynez HAER No.
CA-337 Page 3 BACKGROUND One of the first priorities of the United States upon entering World War II was the construction of ships. The global experience and ferocity of World War I taught the United States that World War II would be on a grander scale, in more places, involve more people, and require more equipment total war.1 During World War II, the U.S. Maritime Commission became a pivotal force in the development and construction of ships, much like the U.S. Shipping Board had been in World War I. Created in the Maritime Commission succeeded the Shipping Board, but generally followed the same directive: the promotion of U.S. shipping interests.
After the United States entered World War II, the Maritime Commission established the Emergency Program, a massive ship construction plan that utilized new and existing shipyards across the United States.2 The need for the Emergency Program stemmed from the decline of the maritime industry in the inter-war years. A majority of the ships in the Merchant Marine originated from the mobilization endeavor authorized by the U.S. Shipping Board to support American troops in World War I. The board approved the construction of 470 ships to support the war effort. Between and the board added ships to the Merchant Marine, giving the United States a more robust presence in international shipping than it had had in seventy years. The U.S.
stock market crash in and the Great Depression were major setbacks to the maritime industry. Many steamship companies were unable to replace or update aging ships over 90 percent of the fleet was over twenty years old and had an average speed of between 10 and 11 knots.3 In the mid-1930s, the U.S. government intervened with new legislation to aid the beleaguered maritime industry. President Franklin D. Roosevelt s New Deal economic policies eventually helped revive the Merchant Marine when Congress passed the Merchant Marine Act of The act created the U.S. Maritime Commission, superseding the U.S. Shipping Board, and it infused new capital and ideas for rebuilding the fleet. By the U.S.
Maritime Commission had developed a long-range program for building 500 ships that were both contemporary and economical over a ten-year period. In the Maritime Commission determined that the production quota of fifty ships per year was too low and doubled it.4 1 Russell F. Weigley, The American Way of War: A History of United States Military Strategy and Policy (New York, NY: Macmillan Publishing Co., Inc., pp. xxi-xxiii. 2 Ren De La Pedraja, A Historical Dictionary of the U.S. Merchant Marine and Shipping Industry since the Introduction of Steam (Westport, CT: Greenwood Press, pp. During World War II, the Maritime Commission issued contracts for vessels. Private firms built another 111 ships while foreign firms built sixty-five for a total of ships. 3 Brian J.
Cudahy, Box Boats: How Container Ships Changed the World (New York: Fordham University Press, pp. L.A. Sawyer and Mitchell, Victory Ships and Tankers: The History of the Victory Type Cargo Ships and of the Tankers Built in the United States of American during World War II (Cambridge, MD: Cornell Maritime Press, Inc., p. 15. 4 Cudahy, Box Boats, p. 3; Sawyer and Mitchell, Victory Ships and Tankers, p. 15. Mission Santa Ynez HAER No. CA-337 Page 4 There were mounting concerns about the war in Europe and the success of the German U- boat campaign against English shipping, particularly since U.S. steamship companies traded with England and France. The U.S. also feared that Germany might next turn its attention to U.S. ships or U.S. trade routes.
In response, the Maritime Commission raised its shipping quota once again in August to 200 ships per year.5 Tankers played a crucial role in successfully defeating the Japanese in the Pacific during World War II. The necessity of tankers became apparent to the U.S. Navy after the fall of the Philippines and Guam, two important forward bases, which forced the navy to supply its forces at sea. Navy tankers like the Mission Santa Ynez generally supplied vessels at anchor or in safe locations, such as an atoll or lagoon. Later, the U.S. Armed Forces constructed forward bases that the tankers utilized as staging areas. In the last stages of the war in the Pacific, the U.S.
Navy employed tankers using underway replenishment (UNREP) since the warships were at sea for longer periods of time and thus using more fuel, supplies, and ammunition. The UNREP method of fueling consisted of two or more vessels reaching similar speed and course. With the ships on a parallel course and at a close distance, the tankers, like the Mission Santa Ynez, passed a line to the receiving ship. High-strength lines strung between ships allowed cargo and fuel lines to be pulled across to the receiving ship. The tanker s boom held the fuel hose through a saddle, and the hose was attached to the receiving vessel s bunker for refueling.6 T2 TANKER The most common type of tanker was the T2-SE-A1 (see HAER No. VA-128, Saugatuck, for example).
The design can be traced to a commercial plan developed by the Sun Shipbuilding and Dry Dock Company for Standard Oil of New Jersey and later furnished to the Maritime Commission in The standard measurements of the T2 tanker were an overall length of 68' amidships, and a 30' draft. The American Bureau of Shipping rated the vessel at gross tons and deadweight tons. It displaced tons of water. The ship had a raked bow, cruiser stern, and three islands. The T2-SE-A2, of which the Mission Santa Ynez is an example, was similar to the T2-SE-A1 design except that its single-screw, turbo-electric propulsion unit provided shaft horsepower to allow the vessel to reach a top speed of 16- knots with an average cruising distance of around miles.
In comparison, the T2-SE-A1 had shaft horsepower and a maximum speed of 15- knots.7 The plant of the Mission ships was problematic for engineers. Capt. Ted Anderson remembered 5 Sawyer and Mitchell, Victory Ships and Tankers, p. 16 6 James L. George, History of Warships: From Ancient Times to the Twenty-First Century (Annapolis, MD: Naval Institute Press, pp. A.S. Bussey, Skillful Technique Developed in Replenishment at Sea, Bureau of Ships Journal 7 (July pp. 7 This description is based on Sawyer and Mitchell, Victory Ships and Tankers, pp. and U.S. Navy, Ships Data, U.S. Naval Vessels: Auxiliary, District Craft, and Unclassified Vessels (Washington, DC: Government Printing Office, pp. Mission Santa Ynez HAER No.
CA-337 Page 5 .from the standpoint of breakdown and the necessity for repairs, I ll tell you they were just absolute workhorses for engineers. They were terrible, just terrible. The big problem with those Mission ships though, more than the standard T-2 with the horsepower plant, was you had a higher pressure and higher temperature on those boilers. Those darn handheld plugs on the economizer element had what they called a flexitallic gasket that was part metal and part asbestos. They d wind up leaking and steam would come out and cut a groove in the steel or the seat of the gasket .Another thing that we played with all the time was condenser leaks you were constantly dumping sawdust into the condensers to plug up all these holes.
And then every once in a while you just had to stop and then you replaced the tubes in those condensers.8 Like the T2-SE-A1, one of the defining features of the T2-SE-A2 tanker design was the nine cargo tanks. The total cargo-handling capacity was gallons or barrels of oil. Tanks 2 through 9 measured wide and were made up of center tanks carrying gallons with side tanks (sometimes referred to as wing tanks) on the port and starboard sides that each carried gallons. Tank 1 differed in that it was made up solely of the side tanks and thus measured wide. Twenty-six cargo hatches in the upper deck with stairwells provided access to the tank interiors. In addition to the cargo tanks, cubic feet of dry cargo could be carried just forward of Tank 1.
A 15' x 12' hatch covered the cargo space and two 5-ton booms on the foremast serviced the area. Ballast was incorporated into the forepeak, and a collision bulkhead was located at the end of the tank. Another tank aft of the bulkhead could carry ballast or additional fuel. Most the drinking water came from two 35-ton tanks located amidships and an auxiliary tank in the stern. On the upper deck were two kingposts in the after well and 3-ton 30' booms to handle the fuel and steam lines used during the underway replenishment operations. Raised catwalks on the upper deck between the islands provided a place for the crew to walk and avoid the extensive network of pipes.
In order to pump out the liquid contained within the cargo tanks, the Mission tankers had two pump rooms, one forward and one aft. A small pump house on the upper deck gave the crew access to the pump rooms. Because of their role in World War II, the T2-SE-A2 tankers carried an assortment of weapons. A single dual-purpose gun was located on the stern and a single dual- purpose gun was mounted on the bow. Four twin guns and twelve twin guns were mounted at various points around the ship. There were two ammunition lockers to supply the armament. The forward ammunition storeroom was below the chain locker and under the waterline for protection. The rear ammunition lock was aft of the after peak and 8 Quoted in Walter W.
Jaffee, The Last Mission Tanker (Sausalito, CA: Scope Publishing Company, unpaginated. Copy included in field records accompanying the documentation. Mission Santa Ynez HAER No. CA-337 Page 6 supplied the 5" gun on the poop deck. Both had flash-proof shafts and elevators to transport the ammunition. Crew accommodations included two berthing areas and a galley. The middle island contained the officers quarters, while the aft island contained the majority of berths for the enlisted crew of forty-four men. The crew s mess was on the starboard side and was separated from the wardroom on the port side by the galley. The life-saving equipment consisted of small boats on either side of the tanker.
There was enough space for the entire crew on each side because a sinking ship tends to list, and the elevated side prevented the crew from deploying the craft. The lifeboats (twenty-five-person capacity) contained quick-release tackle on special skids. There were two additional life rafts suspended from inclined troughs. Additionally, there were emergency kick-out panels on divisional bulkheads in the living quarters, and chain ladders in the ventilation ducts coming up from the machinery spaces. CONSTRUCTION The Marinship Corporation laid the keel of the Mission Santa Ynez on 9 September The W.A. Bechtel Company established the Marinship Corporation in response to a request from Adm. Emory S. Land, chairman of the U.S. Maritime Commission, to build a shipyard.
The Bechtel Company had been involved in shipbuilding through its association with the Seattle-Tacoma Shipbuilding Corporation. After scouting prospective sites, Kenneth Bechtel settled on an abandoned Northwestern Pacific Railroad terminal in Sausalito, California. On 12 March the Maritime Commission awarded the Bechtel Company a contract to build the shipyard and thirty-four Liberty ships. In summer1942, however, the company learned its facility would be constructing tankers instead. The company produced eighteen Liberty ships from to December when it began building tankers. The first nine were fleet oilers while the next thirty-four were Mission tankers, including Mission Santa Ynez. From June until September Marinship built ninety ships under the U.S.
Maritime Commission and employed people.9 Ralph K. Davies sponsored the Mission Santa Ynez at its launching on 19 December and it entered naval service on 13 March It took the Marinship Corporation 186 days to build the ship 101 days on the way and eighty-five days in dock. The Mission class tankers, of which there thirty-four (although only twenty-five maintained their original names), were all named after Catholic missions dating to the late eighteenth and early nineteenth centuries. (For a complete list of the Mission tankers, see Appendix B.) The Mission Santa Ynez was named for a Franciscan mission in colonial California dating to 9 Richard Finnie, ed., Marinship: The History of a Wartime Shipyard (San Francisco: Marinship Corporation, pp. Jaffee, The Last Mission Tanker, unpaginated.
10 U.S. Navy, Dictionary of American Naval Fighting Ships, Vol. IV (Washington, DC: Naval Historical Center, p. Mission Santa Ynez HAER No. CA-337 Page 7
The Mission Santa Ynez was built following the general arrangement of the T2-SE-A2 tanker. At the fore end of the ship are winches on the forecastle deck with storage and utility spaces below. The bridge contains the upper bridge deck with the captain s office, stateroom, radio room, and two boats, the bridge deck with officer quarters, followed by fresh water storage. Aft is the poop deck, where the mess, galley, and crew quarters are located, and beneath it are the boilers and turbines. The nine cargo tanks are located in the midsection of the ship on the second deck, with the pump and engine rooms aft. Three centrifugal pumps manufactured by Ingersoll-Rand are located in the aft pump room and are rated at gallons per minute Electric motors in separate compartments drive the pumps.
Other pumps include two Worthington vertical steam-reciprocating pumps, one Worthington vertical steam-reciprocating cargo pump, and one Worthington stripping pump. The engine room was altered from the original T2-SE-A1 design to accommodate the larger engine. The propulsion equipment includes a General Electric turbo-generator, as well as two General Electric auxiliary generators that produced a 450-volt alternating current. Two Babcock & Wilcox boilers are located behind the turbo-generator in the back room. The boilers provide the steam for the main turbine, auxiliaries, and pumps. The working steam pressure is 600 pounds per square inch at 825 degrees Fahrenheit. Todd oil burners and Hagen controls provide combustion.
Inside the aft steering compartment is an electro-hydraulic gear built by Stetson-Ross Machine Company. The upper deck holds the chillroom, meat room and butter locker, along with the steward s stores at the aft end with storage compartments, the carpenter shop, and the chain room at the fore end.
Pacific Tankers, Inc. chartered the ship, and its first assignment was to carry fuel to U.S. forces overseas. The ship continued running fuel between various locations, including Balboa in the Canal Zone, Eniwetok in the Marshall Islands, and Ulithi in the Western Caroline Islands until the end of the war. The Maritime Commission reacquired the Mission Santa Ynez on 28 March and laid up the ship in the National Defense Reserve Fleet in James River, Virginia.11 On 22 October the navy reacquired the ship and placed it in service with the Naval Transportation Service. On 1 October the navy transferred it to the Military Sea Transportation Service and chartered it to Mathiasen s Tanker Industries for operations.
No records about the ship s movements could be found until when the Mission Santa Ynez delivered fuel to Greenland. In the ship supported the Sixth Fleet and conducted thirty-two underway replenishments while in the Mediterranean.12 11 U.S. Navy, Dictionary of American Naval Fighting Ships, p. 12 U.S. Navy, Dictionary of American Naval Fighting Ships, p. Mission Santa Ynez HAER No. CA-337 Page 8 The worked on the Mission Santa Ynez to extend its service life. Modifications were undertaken on 10 January to 18 March at the Savannah Machine and Foundry Company in Savannah, Georgia. The shipyard sandblasted and painted the ship, removed the wartime features, and upgraded machinery. These modifications improved the ship s appearance, efficiency, and ability to perform assigned tasks.
The Mission Santa Ynez remained in service another ten years and provided ports to Vietnam with fuel and supplies as well as delivering aviation gas and petroleum products around the world until Military Sealift Command decommissioned it in The Mission Santa Ynez is the sole remaining ship afloat in its class and currently is located in National Defense Reserve Fleet in Suisun Bay, California. The visible era of World War II ships is slowly disappearing as these remaining vessels await disposal.13 13 Upgrading of Two Coated Is Now Nearing Completion, Sealift Magazine 15 (November-December pp. Mission Santa Ynez HAER No.
CA-337 Page 9 Appendix A: Historic Photographs Figure 1: USNS Mission Santa Ynez (AO-134) in service with From MSC Files, Naval Historical Center Photographic Section, Washington, DC. Mission Santa Ynez HAER No. CA-337 Page 10 Figure 2: USNS Mission Santa Ynez (AO-134) refueling-at-sea rig. From MSC Files, Naval Historical Center Photographic Section, Washington, DC. Mission Santa Ynez HAER No.
CA-337 Page 11 Appendix B: List of T2-SE-A2 Mission Tankers and Their Dispositions Yard Hull # MC # Name Date Disposition Constructed Marinship 25 Mission Purisima November AO-118, to National Defense Reserve Fleet scrapped Marinship 26 Mission Santa Cruz December AO-133, to scrapped Marinship 27 Mission Soledad January AO-136, to sold private and converted to containership, scrapped Marinship 28 Mission San Jose January AO-125, to sold private and converted to containership, scrapped Marinship 29 Mission San Juan January AO-126, to USN as Flagstaff (AGM renamed Mercury, scrapped Marinship 30 Mission San Miguel February AO-129, wrecked and abandoned Marinship 31 Mission San February AO-114, to USN as Fernando Johnstown (AGM renamed Redstone, scrapped Marinship 32 Mission Santa Ynez March AO-134, later AOT to Marinship 33 Mission San Rafael March AO-130, to scrapped Marinship 34 Mission Solano March AO-135, to sold private and converted to containership, scrapped Mission Santa Ynez HAER No.
CA-337 Page 12 Marinship 35 Mission San Luis March AO-128, to Rey scrapped Marinship 36 Mission San Carlos April AO-120, to sold private and converted to containership, scrapped Marinship 38 Mission San Diego April AO-121, to sold private and converted to containership, scrapped Marinship 39 Mission Carmel May AO-113, to sold private and converted to containership, scrapped Marinship 40 Mission San Antonio May AO-119, to sold private and converted to containership, scrapped Marinship 41 Mission San Gabriel May AO-124, to sold private and converted to containership, scrapped Marinship 42 Mission Dolores May AO-115, to sold private and converted to containership, scrapped Marinship 43 Mission Capistrano June AO-112, to to USN as AG sold private and converted to drill ship Marinship 44 Mission Santa Clara June AO-132, to to Pakistan as Dacca (A0- Marinship 45 Mission June AO-111, to to Buenaventura Mission Santa Ynez HAER No.
CA-337 Page 13 Marinship 46 Mission Santa July AO-131, to Barbara sold private and converted to containership, scrapped Marinship 47 Mission San Luis July AO-127, to Obispo sold private and converted to containership, scrapped Marinship 48 Mission Loreto July AO-116, to scrapped Marinship 49 Mission Santa Maria August Sold private scrapped Marinship 51 Mission San Lorenzo August AO-92, renamed Abatan, converted to distilling ship (AW 4) to to Guantanamo Bay sunk as target Marinship 52 Mission Santa Ana December AO-93, renamed Soubarissen, converted to water tanker to Marinship 53 Mission Alamo January AO-94, renamed Anacostia, to sold private and converted to containership, scrapped Marinship 54 Mission Los Angeles March AO-95, renamed Caney, to to USA as power plant Marinship 55 Mission San April AO-96, renamed Francisco Tamalpais, to to USA as power plant Mission Santa Ynez HAER No.
CA-337 Page 14
Books Cudahy, Brian J. Box Boats: How Container Ships Changed the World. New York: Fordham University Press, De La Pedraja, Ren . A Historical Dictionary of the U.S. Merchant Marine and Shipping Industry since the Introduction of Steam. Westport, CT: Greenwood Press, Finnie, Richard, ed. Marinship: The History of a Wartime Shipyard. San Francisco, CA: Marinship Corporation, George, James L. History of Warships: From Ancient Times to the Twenty-First Century. Annapolis, MD: Naval Institute Press, Jaffee, Walter W. The Last Mission Tanker. Sausalito, CA: Scope Publishing, Lane, Frederick C. Ships for Victory: A History of Shipbuilding under the U.S. Maritime Commission in World War II. Baltimore, MD: The John Hopkins Press, Sawyer, L.A. and Mitchell.
From America to United States: The History of the Merchant Ship Types Built in the United States of America under the Long-Range Programme of the Maritime Commission. Kendal, UK: World Shipping Society, Victory Ships and Tankers: The History of the Victory Type Cargo Ships and of the Tankers Built in the United States of America During World War II. Cambridge, MD: Cornell Maritime Press, Inc., U.S. Navy. Dictionary of American Naval Fighting Ships. Vol. 4. Washington, DC: Naval Historical Center, Ships Data, U.S. Naval Vessels: Vol. III Auxiliary, District Craft, and Unclassified Vessels. Washington, DC: Government Printing Office, Articles Bussey, A.S. Skillful Technique Developed in Replenishment at Sea. BuShips Journal (July pp. Upgrading of Two Coated is now Nearing Completion.
Military Sea Transportation Service Sealift Magazine 15 (November-December ADDENDUM TO: HAER CA-337 MISSION SANTA YNEZ HAER CA-337 (AO-134) Suisun Bay Reserve Fleet Benicia vicinity Solano County California PHOTOGRAPHS HISTORIC AMERICAN ENGINEERING RECORD National Park Service U.S. Department of the Interior C Street NW Washington, DC