BlockBefore

Bolster, Suisun Bay Reserve Fleet, Benicia

Bolster, Suisun Bay Reserve Fleet, Benicia, Solano County, CA. Surveyed as HAER CA-355, with a 3,326-word written history.

From the record

“The Bolster was the first ship in a class of six salvage vessels built for the U.S.”

Written record, HAER CA-355 survey. Machine-read text.

Surveyed by the federal HAER program as HAER CA-355 · the record runs 3326 words · one of 191 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Location

89 words

Source document Quoted word for word from HAER CA-355. Not written, edited or summarised by this site.

Suisun Bay Reserve Fleet, Benicia vicinity, Solano County, California Rig/Type of Craft: Auxiliary Number: ARS-38 Trade: Salvage rescue Principal Dimensions: Length (oa): Length Beam: 43' Draft: Displacement: long tons Maximum continuous shaft horsepower: Service speed: 16 knots (The listed dimensions are as built, but it should be noted that draft, displacement, and tonnages were subject to alteration over time as well as variations in measurement.) Propulsion: Diesel-electric plant, twin screw Dates of Construction: Keel laying: 20 July Launching: 23 December Commissioning: 1 May Builder: Basalt Rock Company, Napa, California

Significance

51 words

Source document Quoted word for word from HAER CA-355. Not written, edited or summarised by this site.

The Bolster was the first ship in a class of six salvage vessels built for the U.S. Navy during World War II. The Bolster performed numerous salvage operations during its career and remains notable for being the last surviving American vessel afloat in its class. BOLSTER HAER No. CA-355 (Page 2)

Written history

3115 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CA-355. Not written, edited or summarised by this site.

This project is part of the Historic American Engineering Record (HAER), a long-range program to document historically significant engineering and industrial works in the United States. The Heritage Documentation Programs of the National Park Service, U.S. Department of the Interior, administers the HAER program. The project was prepared under the direction of Todd Croteau (HAER Maritime Program Coordinator). Ashley T. Walker (HAER Contract Architect) generated vessel drawings. Jet Lowe (HAER Photographer) produced the large-format photographs. Special thanks to Erhard Koehler (U.S. Maritime Administration) whose help and assistance greatly benefited this project. BOLSTER HAER No.

CA-355 (Page 3) BACKGROUND One of the first priorities of the United States upon entering World War II was the construction of ships. The global experience and ferocity of World War I taught the United States that World War II would be on a grander scale, in more places, involve more people, and require more equipment total war.1 During World War II, the U.S. Maritime Commission became a pivotal force in the development and construction of ships, much like the U.S. Shipping Board had been in World War I. Created in the Maritime Commission succeeded the Shipping Board, but it generally followed the same directive: the promotion of U.S. shipping interests.

After the United States entered World War II, the Maritime Commission established the Emergency Program, a massive ship construction plan that utilized new and existing shipyards across the United States.2 The need for the Emergency Program stemmed from the decline of the maritime industry in the inter-war years. A majority of the ships in the Merchant Marine originated from the mobilization endeavor authorized by the U.S. Shipping Board to support American troops in World War I. Although the board approved the construction of 470 ships to support the war effort, the United States participation in the war was brief.

Between and however, the board added another ships to the Merchant Marine, giving the United States a more robust presence in international shipping than it had had in seventy years. The U.S. stock market crash in and the Great Depression were major setbacks to the maritime industry. Many steamship companies were unable to replace or update aging ships over 90 percent of the fleet was over twenty years old and had an average speed of between 10 and 11 knots.3 In the mid-1930s, the U.S. government intervened with new legislation to aid the beleaguered maritime industry. President Franklin D. Roosevelt s New Deal economic policies eventually helped revive the Merchant Marine when Congress passed the Merchant Marine Act of The act created the U.S. Maritime Commission, superseding the U.S.

Shipping Board, and it infused new capital and ideas for rebuilding the fleet. In the U.S. Maritime Commission developed a long-range program for building 500 ships that were both contemporary and economical over a ten-year period. In the Maritime Commission determined that the production quota of fifty ships per year was too low and doubled it.4 There were mounting concerns about the war in Europe and the success of the German U-boat campaign against English shipping, particularly since U.S. steamship companies traded with England and France. The United States also feared that Germany might next turn its attention to 1 Russell F. Weigley, The American Way of War: A History of United States Military Strategy and Policy (New York, NY: MacMillan Publishing Co., Inc., pp. xxi-xxiii.

2 Ren De La Pedraja, A Historical Dictionary of the U.S. Merchant Marine and Shipping Industry since the Introduction of Steam (Westport, CT: Greenwood Press, pp. During World War II, the Maritime Commission issued contracts for vessels. Private firms built an additional 111 ships while foreign firms built sixty-five for a total of 3 Brian J. Cudahy, Box Boats: How Container Ships Changed the World (New York: Fordham University Press, pp. L.A. Sawyer and Mitchell, Victory Ships and Tankers: The History of the Victory Type Cargo Ships and of the Tankers Built in the United States of America during World War II (Cambridge, MD: Cornell Maritime Press, Inc., p. 15. 4 Cudahy, Box Boats, p. 3; Sawyer and Mitchell, Victory Ships and Tankers, p. 15. BOLSTER HAER No. CA-355 (Page 4) U.S.

ships or U.S. trade routes. In response, the Maritime Commission raised its shipping quota once again in August to 200 ships per year.5

Bolster Class

The U.S. Congress passed legislation on 24 October establishing the Naval Salvage Service. After the attack on Pearl Harbor, the legislation allowed the navy to begin salvage operations through a contract with Merritt-Chapman and Scott on 11 December In addition, it allowed the U.S. Navy to have Merritt-Chapman and Scott train future naval salvage operators.6 A salvage crew s main job was to augment damage control beyond the capacity of the ship s crew. This could include fire fighting, towing ships to repair facilities, and clearing harbors of scuttled ships and vessels targeted in combat. The U.S. Navy quickly learned that it was far faster to repair a damaged vessel than to construct a new one.

During the island-hopping campaigns of the Pacific in World War II, for example, salvage crews cleared the beaches of landing craft while also retaining many of the damaged ones for repair. The craft and their cargoes could then be used in future operations, but, more importantly, the beaches were cleared for additional assault waves as the beach heads became staging areas.7 The U.S. Navy designed and ordered the Bolster class, which was a group of salvage ships. The navy s own Bureau of Construction, along with naval officers and the salvage industry, developed this new class during World War II. The salvage ships were sturdy, oceangoing tugs equipped with diesel-electric propulsion units and strong, auto-tensioned towing winches. The U.S.

Navy modeled the Bolster class on the Diver salvage-ship design. The key difference between the two types of salvage ships was that the Bolster class had 5' longer beam, which made it more stable and allowed it to carry more equipment. Otherwise, the Bolster and Diver classes were identical.8 CONSTRUCTION The Basalt Rock Company s Steel Division built all six of the vessels in the Bolster class. The company was located south of Napa, California, on the Napa River. As the name suggests, the company had originally started in as a rock quarry operation, but by it had begun constructing its own barges. In addition to the Bolster class, the shipyard built sixteen Diver- class vessels, 115 barges, and various other vessels for the U.S.

Navy from until The Bolster s keel was laid on 20 July 5 Sawyer and Mitchell, Victory Ships and Tankers, p. 16; Thomas Wildenberg, The Origins and Development of the T2 Tanker, American Neptune (Summer pp. 6 C.A. Bartholomew, Mud, Muscle, and Miracles: Marine Salvage in the United States Navy (Washington, DC: Department of the Navy, pp. 55, 69. 7 Bartholomew, Mud, Muscles, and Miracles, pp. 8 Bartholomew, Mud, Muscles, and Miracles, pp. 54, 9 Basalt Rock Company, Napa, CA, available at accessed 17 August BOLSTER HAER No. CA-355 (Page 5)

Description

The Bolster measured in overall length with a 43' beam and a limiting draft of The steel-hulled ship displaced tons of water when fully loaded. The twin-screw, diesel- electric propulsion plant created shaft horsepower per motor for a top speed of 16 knots. Flank speed resulted in a radius of nautical miles while cruising speed extended the radius to nautical miles. At 95 percent capacity, the fuel tanks held barrels of diesel fuel for the main engines and auxiliary generators. There were also tanks that could carry a total of barrels of gasoline for use in portable generators and pumps and for the two small boats carried onboard.10 The machinery spaces contained a wide assortment of equipment dedicated both to operating the ship and to the salvage operations.

The engine room on the first platform contained four 8- cylinder Cooper-Bessemer diesel engines. Connected to the engines were four Westinghouse generators that produced 610 kilowatts to create a 500-volt DC current. The generators powered four Westinghouse motors rated at 765 horsepower that drove two shafts at 200 A single Farrel-Birmingham reduction gear stepped the power down on each shaft to turn a four- blade propeller. The aft steering compartment housed two quadrant steering gears that turned the rudders. In the early the Bolster underwent a service life extension plan (SLEP) that resulted in the replacement of the engines with four new 399 Caterpillar diesel engines.

The 16- cylinder engines increased the shaft horsepower from to Originally, auxiliary power for the ship came from two service generators and one emergency generator. The two primary generators were located in the hold between the main and reduction gears. Two 6-cylinder Cooper-Bessemer diesel generators produced 200 kilowatts creating 120 volts of AC power apiece. The emergency generator was on the first platform and only generated 60 kilowatts as opposed to the main ones.12 The forecastle deck had one mast with an 8-ton boom and various salvage gear. An anchor windlass for two Bower-Dunn anchors weighing pounds apiece was located near the bow.

Behind the anchor windlass was another windlass for the foremast boom; this windlass could also be used for picking up salvage through two forward lifting rollers built into the hull on the port and starboard sides. The windlass was rated for 20 tons. At the front of the stern was a mast and beneath that was the Almon-Johnson towing winch (series The towing winch drum held of 2"-steel cable, and the maximum pull rating was pounds. Aft of the bulkhead were two capstans on the port and starboard sides. A towing bit was located between the capstans while a towing hawser containing of 5 "-nylon line was in a hold beneath the deck.13 10 U.S. Navy, Ships Data: U.S. Naval Vessels, Vol. III (Washington, DC: Government Printing Office, pp. 11 U.S. Navy, Ships Data, pp.

Bolster ARS-38 Naval Cruise Book, Class of available at accessed 23 July 12 U.S. Navy, Ships Data, p. Booklet of General Plans USS Bolster (ARS-38), Plates 3, 9, in Record Group 19, National Archives and Records Administration-College Park. 13 Booklet of General Plans, Plates 3, 6. BOLSTER HAER No. CA-355 (Page 6) The ship held an assortment of compressors and pumps. Four compressors were located on the first platform. Two Davy Industrial 100-psi compressors and two Worthington 600-psi compressors pumped air to the divers and to the hyperbaric chamber available to divers suffering from the bends (decompression sickness).

Four large pumps in the hold level could be used for pumping out the bilge, pumping water to the fire-fighting monitors, pumping air into salvage vessels, or pumping water out of laden ships.14 The ship s crew also had the ability to make minor repairs to the Bolster itself while underway. A small DC electric shop complete with a welder was located on the main deck, while a larger machine-and-electrical shop that could replicate parts and conduct repairs was on the second deck. The crew could fabricate minor parts using onboard machines, including a drill press, grinder, and lathe.

Crewmembers also had access to onboard equipment to patch salvage vessels, but shipyards generally performed the larger and more complex repairs that superseded the crew s ability.15 Crew accommodations for the 120 men (seven officers and 113 enlisted personnel) consisted of the executive officers and captain s living quarters on the forecastle deck. The officer s wardroom was on the forecastle deck beneath the navigation bridge. The enlisted personnel berths were on the main deck and the first platform. A sick bay was also located on the main deck. The chief petty officer s mess was on the main deck forward of the galley, while the mess for the enlisted crew was on the port side of the galley.

Food storage spaces were on the first platform, fore of the berths.16 Navigation of the ship took place on the bridge, and the electronics were updated throughout the vessels service life. The bridge contained a compass, engine-order telegraph, gyro repeater, and helm. Behind the bridge on the starboard side was the chartroom while the radar room with a fathometer was on the port side. In the aft section of the bridge deck were communications rooms that received and sent communiqu s. The gyro room was on the first platform beneath the navigation bridge.17 During World War II, the U.S. Navy equipped the Bolster with defensive armament and safety equipment. The ship s 40-millimeter gun was primarily used as a defensive weapon against aircraft and small ships.

After the war, the navy switched the ship s armament to two 20- millimeter guns and two 50-caliber machine guns. Eventually, the Bolster only carried the 50- caliber guns. In case of sinking, there were two 35' craft in cradles and seven rubber lifeboats available off the navigation bridge.18 14 Booklet of General Plans, Plate 9. 15 Booklet of General Plans, Plate 7. 16 Booklet of General Plans, Plates 6, 7. 17 Booklet of General Plans, Plates 18 Booklet of General Plans, Plate 5; Bolster ARS-38 Naval Cruise Book, Class of available at accessed 23 July BOLSTER HAER No. CA-355 (Page 7)

Operational History

On 23 December A.C. Mayo, Jr. christened the Bolster as it slid down the ways. The U.S Navy commissioned the Bolster on 1 May and Lt. Lewis took command of the ship. The Bolster conducted repair duties along the California coast in July before setting sail for Pearl Harbor, Hawaii. While the ship was stationed in Pearl Harbor, Japan surrendered, and the war in the Pacific ended on 15 August The Bolster left Pearl Harbor the same day and headed for Yokosuka, Japan, to conduct salvage operations.

After the crew completed their duties in Japan, the Bolster sailed to Subic Bay, Philippines, on 10 October and remained there for six months carrying out salvage work.19 The Bolster returned to the United States in April and spent the next three years working between Adak, Alaska, and Pearl Harbor, Hawaii, doing salvage and towing jobs. In August the Bolster was needed to pull two barges to Sasebo, Japan. The ship continued working in the Central Pacific and assisted troops during the Korean War.

The crew took part in the Inchon Landing on 15 September and the Hungnam Evacuation from 9 December to 25 December returning to Pearl Harbor on 6 July During the following year, the Bolster periodically traveled to the Far East, performing salvage work and making ports-of-call in Hong Kong, Japan, Korea, Okinawa, and the Philippines.20 After the Korean War, the Bolster continued salvage operations out of Pearl Harbor. In May the ship participated in Operation Wigwam, a nuclear test conducted 500 miles southwest of San Diego, California. The Bolster continued salvage operations in the Central Pacific, and in assisted the Ajah Soliman, a Philippine ship, after it was grounded.

That same year, the Bolster recovered the destroyer Frank Knox and towed it back to port for repairs.21 From the mid-1960s through the early the Bolster performed various salvage operations in support of the U.S. Navy. During the Vietnam War, the Bolster was stationed off the coast of Da Nang, South Vietnam. In the Bolster rescued the Sea Raven and salvaged the Excellency the following year. Afterward the Bolster participated in the recovery of the Air Force s Skylab 4 mission in Two years later, the Bolster saved the merchant vessel Lindenbery. In the ship came to the aid of the USNS Ute off the coast of China, and the following year, the Bolster towed the guided-missile destroyer USS Preble back to Pearl Harbor for repairs.

Another notable salvage effort took place in when the Bolster retrieved a Marine Corps jet that had crashed near Subic Bay, Philippines. The navy changed the Bolster s homeport the following year to Long Beach, California, and the ship operated there until its decommissioning.22 19 U.S Navy, Dictionary of American Naval Fighting Ships, Vol. II (Washington, DC: Naval Historical Center, pp. 20 U.S. Navy, Dictionary, p. 21 Bolster ARS-38 Naval Cruise Book, Class of p. 7. 22 Bolster ARS-38 Naval Cruise Book, Class of p. 7. BOLSTER HAER No. CA-355 (Page 8) CONCLUSION On 24 September the U.S. Navy decommissioned the Bolster, and it was struck from the naval list the same day. On 1 February the U.S.

Maritime Administration acquired the Bolster and put the vessel in its mothball fleet in Suisun Bay, California. The Bolster s forty- nine-year career illustrates how important the ship was to the U.S. Navy. Even though the ship was built during World War II, the Bolster continued to provide valuable salvage services to the U.S. Navy. The conclusion of the Cold War and budgetary cuts signaled the end of the Bolster s service in the early Currently, a non-profit group is interested in turning the Bolster into a floating museum exhibit, and the U.S. Maritime Administration has consequently placed the ship on donation hold. BOLSTER HAER No.

CA-355 (Page 9) APPENDIX A: Bolster Class, List of Ships Bolster (ARS-38) Decommissioned 24 September National Defense Reserve Fleet, Suisun Bay, California Conserver (ARS-39) Decommissioned 1 April disposed of through U.S. Navy ship sinking exercises (SINKEX) Hoist (ARS-40) Decommissioned 30 September scrapped 1 December Opportune (ARS-41) Decommissioned 30 April scrapped 5 December Reclaimer (ARS-42) Decommissioned 16 September SINKEX Recovery (ARS-43) Decommissioned 30 September transferred to Taiwan Retriever (ARS-44) Cancelled Skillful (ARS-45) Cancelled Support (ARS-46) Cancelled Toiler (ARS-47) Cancelled Urgent (ARS-48) Cancelled Willing (ARS-49) Cancelled BOLSTER HAER No. CA-355 (Page 10)

Bibliography

Government Documents General Booklet of Plans USS Bolster (ARS-38). Record Group 19. National Archives and Records Administration-College Park. Books Bartholomew, C.A. Mud, Muscle, and Miracles: Marine Salvage in the United States Navy. Washington, DC: Department of the Navy, Cudahy, Brian J. Box Boats: How Container Ships Changed the World. New York: Fordham University Press, De La Pedraja, Ren . A Historical Dictionary of the U.S. Merchant Marine and Shipping Industry since the Introduction of Steam. Westport, CT: Greenwood Press, Lane, Frederick C. Ships for Victory: A History of Shipbuilding under the U.S. Maritime Commission in World War II. Baltimore: Johns Hopkins Press, Sawyer, L.A. and Mitchell.

Victory Ships and Tankers: The History of the Victory Type Cargo Ships and of the Tankers Built in the United States of America during World War II. Cambridge, MD: Cornell Maritime Press, Inc., U.S. Navy. Dictionary of American Naval Fighting Ships. Vol. VI. Washington, DC: Naval Historical Center, Ships Data U.S. Naval Vessels: Auxiliary, District Craft, and Unclassified Vessels. Washington, DC: Government Printing Office, Internet Material Basalt Rock Company, Napa CA. Available at accessed 17 August Bolster ARS-38 Naval Cruise Book, Class of Available at http://www.e- accessed 23 July Bolster ARS-38 Naval Cruise Book, Class of Available at http://www.e- accessed 23 July

In context

Benicia, California The place record: every map, photograph and survey of this town.
Solano County, California 258 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Benicia

24 of 57 records shown

The federal surveyors worked through Benicia building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
American RacerHAER CA-34614,934 words
USNS CometHAER CA-3489,619 words
Benicia State CapitolHABS CAL,48-BENI,2-5,680 words
US Coast Guard Icebreaker GlacierHAER CA-3415,404 words
Esso GettysburgHAER CA-3545,367 words
WichitaHAER CA-3565,295 words
St. Paul's Episcopal ChurchHABS CAL,48-BENI,15A-4,754 words
General Edwin D. PatrickHAER CA-3444,661 words
Alaska StandardHAER CA-3474,624 words
Benicia ArsenalHABS CAL,48,BEN1,4-S-4,440 words
SperryHAER CA-3424,323 words
TalugaHAER CA-3364,106 words
General John PopeHAER CA-3433,965 words
Mission Santa YnezHAER CA-3373,807 words
SS PetersburgHAER CA-23323,637 words
Benicia ArsenalHABS CAL,48-BENI,4T-2,980 words
Crooks HouseHABS CAL,48-BENI,7-2,938 words
Riddell Fish HouseHABS CAL,48-BENI,8-2,747 words
Winthrop VictoryHAER CA-3452,735 words
MispillionHAER CA-3382,700 words
Benicia ArsenalHABS CAL,48-BENI,4P-2,542 words
Fischer-Hanlon HouseHALS CA-272,442 words
Carr HouseHABS CAL,48-BENI,6-2,067 words
Benicia ArsenalHABS CAL,48-BENI,4J-1,951 words

Provenance

  • Written history. Quoted verbatim from HAER CA-355. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.