Central Pacific Transcontinental Railroad, Tunnel "O", Milepost 132.69, Applegate
Central Pacific Transcontinental Railroad, Tunnel "O", Milepost 132.69, Applegate, Placer County, CA. Surveyed as HAER CAL,31-APGT.V,1-, with a 1,112-word written history.
From the record
“The Central Pacific First Transcontinental Railroad is a segment of the western half of the first transcontinental railroad, built from Sacramento, California to Promontory Summit, Utah between and where it joined the Union Pacific Railroad which had built west from Omaha.”
Written record, HAER CAL,31-APGT.V,1- survey. Machine-read text.
Surveyed by the federal HAER program as HAER CAL,31-APGT.V,1- · the record runs 1112 words · one of 28 surveyed structures published for this county.
Source document
Quoted word for word from HAER CAL,31-APGT.V,1-.
Not written, edited or summarised by this site.
The Central Pacific First Transcontinental Railroad is a segment of the western half of the first transcontinental railroad, built from Sacramento, California to Promontory Summit, Utah between and where it joined the Union Pacific Railroad which had built west from Omaha. For the purpose of the current project, the first transcontinental railroad was found likely to be eligible for the National Register of Historic Places at the national level of significance under Criterion A for its significance in transportation history, in uniting the East and the West, and in the development of the West.
The railroad's period of significance is to from the line's completion in through the years of its role in the settlement and development of the West, to the conclusion of the railroad's achievements in World War II. Tunnel "0" is a contributive element of this historic property, virtually the last extant unmodified Central Pacific tunnel. Report Prepared By: John W. Snyder Co-Principal Preservation Services P.O. Box Sacramento CA CENTRAL PACIFIC TRANSCONTINENTAL RAILROAD, TUNNEL "0" HAER No. CA-199 Page 2
Description
Tunnel "0" is an abandoned, unlined single track railroad tunnel, approximately 800 feet in length and of inverted horseshoe section, with granite ashlar portal faces and wingwalls, and a stone masonry-lined bore. The tunnel is on a tangent (no curve) alignment, and originally carried the tracks of the Central Pacific Railroad Transcontinental Line. II. HISTORICAL INFORMATION When the Central Pacific built the first transcontinental rail line over the Sierra Nevada in expediency stemming from time considerations and from the hand labor used to build the line forced a circuitous route that, wherever possible, hugged the outside slopes of hills to maintain reasonable grades in the climb over the mountain rampart.
The builders were able to avoid tunneling until they had nearly reached Blue Canon, more than seventy miles from Sacramento. There they built Tunnel 1 (HAER CA-207), and sequentially numbered the tunnels following to the east as they pushed the tracks toward Promontory Summit and the May meeting with the Union Pacific. Following completion of the transcontinental railroad in events unclear today forced the Central Pacific to build a new tunnel near Applegate, well to the west of Tunnel 1. It may have been that the south slope of the hill that the original line followed proved to be unstable; a cave- in at that location during the construction of Tunnel 23 (HAER CA-198) in during the construction of the second track between Rocklin and Colfax may provide a clue.
At any rate, in the Central Pacific built Tunnel "0" at about milcpost this remained the westernmost tunnel on the original line west of Sacramento until the double-tracking effort in the first decade of the century. At that time, crews of the Utah Construction Company built Tunnel 23 (then called Tunnel 9) parallel to the structure and on a slightly lower grade; the old tunnel remained in use, carrying the eastbound mainline.
At an unknown later date, Southern Pacific rerouted the old mainline around the south slope of the hill, constructing a wide bench to carry it, and abandoned Tunnel It remains today, largely hidden behind vegetation at both ends, as virtually the last extant unmodified Central Pacific tunnel (Tunnel 1 was enlarged as a double-track tunnel in and the other original Central Pacific tunnels to the east were enlarged in the and again in the Tunnel "0" is included in the documentation set for the Central Pacific Transcontinental Railroad (HAER No. CA-196) in order to provide context, and as a rare survivor of the pioneer route. HI. SOURCES "Colfax Grade Revision; Southern Pacific," Railway Age Gazette, February 18, Daggett, Stuart. Chapters on the History of the Southern Pacific.
New York: Augustus M. Kelley, Publishers, originally published CENTRAL PACIFIC TRANSCONTINENTAL RAILROAD, TUNNEL "0" HAER No. CA-199 Page 3 Deverell, William. Railroad Crossing: California and the Railroad, Berkeley: University of California Press, Hofsommer, Don L. The Southern Pacific, College Station, TX: Texas A&M University Press, Howard, Robert West. The Great Iron Trail: The Story of the First Transcontinental Railroad. New York: G. P. Putnam's Sons, Kraus, George. High Road to Promontory: Building the Central Pacific across the High Sierra. Palo Alto: American West Publishing Company, Sabin, Edwin L. Building the Pacific Railway. Philadelphia and London: J. B. Lippincott Company, Signor, John R.
to Richard Starzak, Memorandum, "Brief Chronological History of Sierra Tunnels," October "The Days When The Central Pacific Was Young," Southern Pacific Bulletin, May United States Geological Survey. Topographic map. Greenwood, Calif, quadrangle, IS series, (photorevised IV. PROJECT INFORMATION As a result of the merger of the Union Pacific and Southern Pacific Railroads, a federal undertaking under the jurisdiction of the Surface Transportation Board of the U.S. Department of Transportation, and in order to accommodate freight trains utilizing longer and taller cars and loads-tri-level auto rack cars and cars carrying double-stacked containers, the Union Pacific will need to increase tunnel clearances on the former Southern Pacific Donner Pass Route.
The tunnels, built between and are contributing elements of the National Register-eligible Southern Pacific Donner Pass Route Tunnels Historic District. All tunnels have been laser- measured and the railroad will determine clearance needs on a tunnel-by-tunnel basis. Some, because of curved alignment, will require interior work to allow for longer cars such as tri-lcvel auto rack cars; others will require both interior and portal work to provide sufficient vertical clearance for "double-stack" container cars. The latter work may impact the character-defining tunnel portals if crown mining of the tunnels (as opposed to lowering the tunnel floors) is selected.
Inasmuch as this would cause an adverse effect to the tunnels, Union Pacific has elected to record the tunnels for the Historic American Engineering Record. Tunnel "0" is included in the documentation set for the Central Pacific Transcontinental Railroad (HAER No. CA-196) in order to provide context, and as a rare survivor of the pioneer route. Documentation was carried out by Preservation Services, John Snyder Field Director and Historian, and Ed Andersen, Photographer. Photos were made in August and research was carried out from August through March
The federal surveyors worked through Applegate building by building. These are the other structures
they measured and filed a report on, longest report first.
Written history. Quoted verbatim from HAER CAL,31-APGT.V,1-. United States federal work, no copyright under 17 U.S.C. 105.
Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.