BlockBefore

Central Pacific Transcontinental Railroad, Tunnel No. 28, Milepost 134.75, Applegate

Central Pacific Transcontinental Railroad, Tunnel No. 28, Milepost 134.75, Applegate, Placer County, CA. Surveyed as HAER CAL,31-APGT.V,7-, with a 1,483-word written history.

From the record

“The Central Pacific First Transcontinental Railroad is a segment of the western half of the first transcontinental railroad, built from Sacramento, California to Promontory Summit, Utah between and where it joined the Union Pacific Railroad which had built west from Omaha.”

Written record, HAER CAL,31-APGT.V,7- survey. Machine-read text.

Surveyed by the federal HAER program as HAER CAL,31-APGT.V,7- · the record runs 1483 words · one of 28 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Significance

1381 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CAL,31-APGT.V,7-. Not written, edited or summarised by this site.

The Central Pacific First Transcontinental Railroad is a segment of the western half of the first transcontinental railroad, built from Sacramento, California to Promontory Summit, Utah between and where it joined the Union Pacific Railroad which had built west from Omaha. For the purpose of the current project, the first transcontinental railroad was found likely to be eligible for the National Register of Historic Places at the national level of significance under Criterion A for its significance in transportation history, in uniting the East and the West, and in the development of the West.

The railroad's period of significance is to from the line's completion in through the years of its role in the settlement and development of the West, to the conclusion of the railroad's achievements in World War II. Tunnel 28 is a contributive element of this historic property. Report Prepared By: John W. Snyder Co-Principal Preservation Services P.O. Box Sacramento CA CENTRAL PACIFIC TRANSCONTINENTAL RAILROAD, TUNNEL 28 HAER No. CA-204 Page 2

Description

Tunnel 28 is a 3,200-foot, single track railroad tunnel, with granite ashlar portal faces and wingwalls. As-built, the tunnel was concrete-lined for several hundred feet in from each portal, with the remainder lined in redwood timber; the railroad has subsequently covered the timbering with shotcrete. The tunnel is on a tangent (no curve) alignment, and carries the tracks of the Union Pacific Railroad's (formerly Southern Pacific) Donner Pass line. H.

Historical Information

Contractors, Utah Construction Company of Ogden built Tunnel 28 (originally numbered Tunnel 13) in as an element of the reconstruction and double-tracking of the original Central Pacific line between Rocklin and Colfax. [For a full history of this line and of this undertaking, see the documentation set for the Central Pacific Transcontinental Railroad (Southern Pacific Overland Route) (Southern Pacific Donner Pass Route), Southern Pacific Donner Pass Route Tunnels, HAER No. CA-196.] After assuming control of the Southern Pacific/Central Pacific and merging them with the Union Pacific in Edward H. Harriman had embarked on a series of huge reconstruction projects system-wide.

One of these was the double-tracking of the original Central Pacific line over Donner Pass, the first segment of which was from Rocklin to Colfax. In connection with this, Harriman also moved the roundhouse and locomotive shop facilities originally built at Rocklin by the Central Pacific, to nearby Roseville where he built a much larger and more modern facility to handle the larger locomotives he was bringing onto the system. Two contracting firms divided the work, with Utah Construction Company building the portion from Colfax west to Clipper Gap, and Erickson & Petterson handling the work from Rocklin east to Clipper Gap. All the tunnels, whether single- or double-track, conformed to Southern Pacific Common Standard plans.

Utah Construction Company built their tunnels by driving two drifts (small pilot tunnels) at the spring line of the final arch. They then drove a third drift at grade level and centered, roofing it with loose timbers. Workers then blasted the "bench", the material between the floor of the upper drifts and the ceiling of the lower drift, then removed some of the lower drift's roof timbers to drop the loose material down into dump cars for removal. At Tunnel 28, crews faced the longest tunnel on the Rocklin-to-Colfax reach, a 3,200-foot bore through the northwest slopes of Hotchkiss Hill. The contractors encountered clay shale at each end of the tunnel, with slate in the center. Working from both ends, the crews took fifteen months to drive all but the last 400 feet.

At this tunnel, because of the size of the job, they also used a small air-operated power shovel to take out the bench. It was at Tunnel 28 that Utah Construction built its own power plant to supply electricity for the air drills, lights, pumps, and ventilating fans. Due to the length of the bore, smoke hung badly in the tunnel after blasting. The solution was to run a suction pipe up to the headworks. After detonating a charge, crews turned on the air supply to the drills and started the suction fan. While effective, this system was slow in clearing the air sufficiently to allow work to proceed. The contractors then experimented with other methods, including placing the suction pipe about 400 CENTRAL PACIFIC TRANSCONTINENTAL RAILROAD, TUNNEL 28 # HAER No.

CA-204 Page 3 feet back from the heading since that was the greatest distance the smoke seemed to reach, and then exhausting compressed air close to the headworks; they also tried omitting the suction pipe and simply injecting compressed air at the headworks to blow the smoke completely back out of the portal. In order to alleviate fumes from the dynamite, they inserted an ammonia cartridge with the dynamite, the ammonia fumes neutralizing those of the explosive; the amount of ammonia used varied with the size of the explosive charge. This tunnel received more concrete lining originally than the other tunnels on the line because when it was begun, the intent was to fully line all the tunnels, so crews drove the first part based on that expectation.

Too, the roof was thin at the west end, and crews encountered water in the rock at the east end, making longer-than-average concrete lining expedient. HI. SOURCES "Colfax Grade Revision; Southern Pacific," Railway Age Gazette, February Daggett, Stuart. Chapters on the History of the Southern Pacific. New York: Augustus M. Kelley, Publishers, originally published Deverell, William. Railroad Crossing: California and the Railroad, Berkeley: University of California Press, "E.H. Harriman Is President," The Sacramento Bee, September 30, "Electrification on the Southern Pacific," The Railroad Gazette, September "General News Section," Railway Age Gazette, April 21, June 30, March 17, Hofsommer, Don L. The Southern Pacific, College Station, TX: Texas A&M University Press, Howard, Robert West.

The Great Iron Trail: The Story of the First Transcontinental Railroad. New York: G. P. Putnam's Sons, Kraus, George. High Road to Promontory: Building the Central Pacific across the High Sierra. Palo Alto: American West Publishing Company, "Millions To Be Expended: Southern Pacific Is to Be Put in Fine Shape," The Sacramento Bee, June 25, "Oil Burning Mallets; Southern Pacific," Railway Age Gazette, 50:24a, June 16, "Railroad Construction," The Railroad Gazette, November December 27, May 5, June 16, Sabin, Edwin L. Building the Pacific Railway. Philadelphia and London: J. B. Lippincott Company, CENTRAL PACIFIC TRANSCONTINENTAL RAILROAD, TUNNEL 28 HAER No. CA-204 Page 4 Signor, John R.

to Richard Starzak, Memorandum, "Brief Chronological History of Sierra Tunnels," October 4, "Survey For The Big Tunnel," The Sacramento Bee, August 24, 'The Days When The Central Pacific Was Young," Southern Pacific Bulletin, May "The Harriman Influence," The Railroad Gazette, January "The Harriman Investigation," The Railroad Gazette, March "The Interstate Commerce Commission's Report on the Harriman Investigation," The Railroad Gazette, July "The Roseville Yards of the Southern Pacific," The Railroad Gazette, December 27, United States Geological Survey. Topographic map. Colfax, Calif, quadrangle, series, (photorevised IV.

PROJECT INFORMATION As a result of the merger of the Union Pacific and Southern Pacific Railroads, a federal undertaking under the jurisdiction of the Surface Transportation Board of the U.S. Department of Transportation, and in order to accommodate freight trains utilizing longer and taller cars and loads-tri-level auto rack cars and cars carrying double-stacked containers, the Union Pacific will need to increase tunnel clearances on the former Southern Pacific Donner Pass Route. The tunnels, built between and are contributing elements of the National Register-eligible Southern Pacific Donner Pass Route Tunnels Historic District. All tunnels have been laser- measured and the railroad will determine clearance needs on a tunnel-by-tunnel basis.

Some, because of curved alignment, will require interior work to allow for longer cars such as tri-level auto rack cars; others, including Tunnel 28, will require both interior and portal work to provide sufficient vertical clearance for "double-stack" container cars. The latter work may impact the character-defining tunnel portals if crown mining of the tunnels (as opposed to lowering the tunnel floors) is selected. Inasmuch as this would cause an adverse effect to the tunnels, Union Pacific has elected to record the tunnels for the Historic American Engineering Record. Documentation was carried out by Preservation Services, John Snyder Field Director and Historian, and Ed Andersen, Photographer. Photos were made in August and research was carried out from August through March

In context

Applegate, California The place record: every map, photograph and survey of this town.
Placer County, California 357 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Applegate

8 records

The federal surveyors worked through Applegate building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
Ponderosa Way BridgeHAER CA-23804,209 words
Central Pacific Transcontinental RailroadHAER CAL,31-APGT.V,4-1,349 words
Central Pacific Transcontinental RailroadHAER CAL,31-APGT.V,6-1,315 words
Central Pacific Transcontinental RailroadHAER CAL,31-APGT.V,2-1,300 words
Central Pacific Transcontinental RailroadHAER CAL,31-APGT.V,5-1,245 words
Central Pacific Transcontinental RailroadHAER CAL,31-APGT.V,3-1,204 words
Central Pacific Transcontinental RailroadHAER CAL,31-APGT.V,8-1,196 words
Central Pacific Transcontinental RailroadHAER CAL,31-APGT.V,1-1,112 words

Provenance

  • Written history. Quoted verbatim from HAER CAL,31-APGT.V,7-. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.