Building 810 is significant as an excellent example of a double-cantilever, medium bomber hangar used for maintenance of the It was one of the first such double-bay bomber hangars erected nationwide by the Strategic Air Command (SAC). The was SAC's first long-range, intercontinental bomber carrying nuclear weapons, the only aircraft during the early years of the Cold War capable of reaching-and returning from- the Soviet Union. This maintenance hangar, in response to the size of the bomber, was monumental.
Similar structures were built at SAC installations between and The double-cantilever, hangar was one of the first symbolic military structures of the Cold War; its physical size foreshadowed the moleholes and alert apron of the and tanker (Geo-Marine, Description: This building is an oversized, steel frame, and open-truss hangar, with a flat roof, reinforced, concrete slab foundation and metal-deck roof. Clad in corrugated metal siding, it is high and measures by with an by offset and four by 6-inch wing additions. The primary (north) and rear (south) fac;ades are defined by full-fac;ade motorized sliding pocket doors dominated by two parallel rows of multi-light steel industrial ribbon windows provided for access of the large aircraft.
Various modifications are visible at the west elevation. The interior is dominated by a vast open expanse of metal trusses. The small portion of the building's center is enclosed, and presumably contains office and storage space. Additionally, the westernmost portion is enclosed, encompassing office, shop and storage areas. Missile . triangulation stations, brass plates set in reinforced concrete piers independent of the hangar floor, occupied a significant portion of the northern half of the shop area. Travis Air Force Base Hangar (Building No. HABS No. CA-2669-B (page 2) Historical Context: The hangar was initially developed in mid-1947 by the engineering firm of Roberts & Schaefer of Chicago as a monolithic, rib-and-shell vault structure designed to accommodate two and named the hangar.
Only three hangars of this type are known to have been constructed. In a second prototype was developed, with only one hangar constructed by Pacific Iron and Steel of Los Angeles. SAC selected a third design, that by the Kuljian Corporation of Philadelphia, named a double- cantilever, heavy bomber hangar, or hangar. Its truss roof was designed to permit easy extension without complex structural modifications while incorporating a fully open plan inside. The truss was derived from the three-dimensional space frame patented by Charles W. Atwood in and was the result of innovations for the movable truss patented by Komad Wachsmann and Paul Weidlinger in The mobile truss was designed for extension in all four directions from two central trussed bents.
Wachsmann, a German architect-engineer, had immigrated to the United States during World War II with the aid of Albert Einstein, and had also patented a prefabricated modular house with architect Walter Gropius. The Air Force adopted three sizes of the prototype: a single bay designed to accommodate two a double-bay designed for three and a triple-bay for five bombers. By October the Air Force had constructed 50 hangars on 44 bases, many sited immediate to key nuclear weapons storage and production sites. Three- quarters of the hangars were of the single-bay type, and only six were of the triple-bay type.
Travis AFB received its first from Vaulted Vultee Corporation in with its inventory reaching 43 by The original drawings for the hangar were completed in July by the Kuljian Corporation of Philadelphia, and modified for Travis AFB in December Building constructed in is a double-bay hangar, measuring square feet for the maintenance of this aircraft. Minor modifications were introduced in according to the designs of Ned H. Adams and Associates. In this structure was modified by Earl and Wright to accommodate a GAM-77/ GAM-72 assembly, guidance, and maintenance shop (housing missile racks); the west fa9ade was extended for GAM-72 storage, and SAC administrative offices were added at the east end.
A missile assembly shop was added to the west end in In response to SAC's leave-taking of Travis AFB and housing by the Military Airlift Command, three prefabricated maintenance stations were added in the center of the space in August to service transports, according to the designs of Hudgins, Thompson, Ball & Associates. These were again removed in to accommodate C-5A maintenance. Travis Air Force Base Hangar (Building No. HABS No. CA-2669-B (page 3)