Building 906 is significant as a contributor to the AFSWP "Q" Area, also referred to as Fairfield Air Force Station (AFS), the Air Materiel Command (AMC) West River Depot, and the Air Defense Command (ADC)/Air Defense Group (ADG). It is interpreted as a rare and distinguishable entity, three components of which are distinctive: the "A" structure, the "C" structure, and the interconnected weapons assembly structures. This district was designed as four concentrations of buildings and structures within high- security fencing: administrative buildings, communications-intelligence center, power plant, and base spares warehousing.
It is one of three buildings designed as warehousing for the compound (Geo-Marine, Description: This 6,262-square-foot, rectangular, concrete block, masonry building sits perpendicular to Dixon Avenue, with the primary fac;:ade facing south. It has a flat, built-up roof. The south fac;:ade consists of (left to right): two 9-light metal "projected type" industrial sash; a metal clad, wood sliding door with a sheet metal hood; a 9-Iight metal "projected type" industrial sash measuring a metal clad, wood sliding door with a sheet metal hood; and another identical window.
The north elevation, left to right, is defined by: another identical window; a metal door with stoop, an identical window; a double metal door (leading to the mechanical room); an identical window; a metal door; an identical window; a metal door; and a larger 20-light metal "projected type" industrial sash measuring The east elevation is defined by 3 9-light sashes; and the west by 2 20-light sashes, followed by 1 4-light sash.
The interior of this building is divided into a number of irregular spaces: three interconnected offices are at the southeast comer; to their north is a toilet room with a single stall and urinal; to the north and east is a large, single, open space, followed by an "L"-shaped area comprising four offices and a mechanical room; the remainder of the interior consists of an open warehouse. Historical Context: Building 906 was constructed in as inert spares storage.
It was designed by Black & Veatch, Kansas City, Missouri, in The exterior appeared much the same as it does today, with the following exceptions: no double door was at the center of the north elevation, while the existing doors were sheltered by small wood canopies; the interior consisted of one large open warehouse space, with only a single office in the northwest comer, sharing a common wall with the toilet room, which was provided with sound insulation. The warehouse space was defined by 12 wood-clad concrete columns standing on-center. The office interior was finished with an asphalt tile floor, Travis Air Force Base Inert Spares Storage Building (Building No. HABS No.
CA-2669-D (page 2) wood base molding, and gypsum board wall and ceiling; while the warehouse included a concrete floor, a wood base mold, a plywood wainscot, gypsum wall, and an exposed, unfinished ceiling. An alarm and a fire suppression sprinkler system were included in the original building design. A major remodeling occurred in with alterations designed by Pacifica Services, Inc., and lndeco Engineers. These included the introduction of the double doors at the north elevation, a subdivision of the interior, and the removal of the wood canopies.