This HAER documentation has been prepared for the US Department of Energy, Livermore Site Office, with supervision from the California State Historic Preservation Office. In April the National Nuclear Security Administration (NNSA) Livermore Field Office in consultation with the California State Historic Preservation Officer (SHPO) determined Buildings 806A, 817A, 827A, and to be contributors to a Site 300 High Explosives Process Area Historic District. LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA HAER No. CA-2353 (Page 2) For individual building descriptions and histories of the contributors to the determined Site 300 High Explosives Process Area Historic District, see the following: Building HAER No. CA-2353-A Building 806 Complex (Buildings 806A and HAER No.
CA-2353-B Building HAER No. CA-2353-C Pressing Complex (Buildings 817A, and HAER No. CA-2353-D Building HAER No. CA-2353-E Building HAER No. CA-2353-F Chemistry Development Complex (Buildings 827A and HAER No. CA-2353-G List of Acronyms: AEC Atomic Energy Commission HE High explosive LANL Los Alamos National Laboratory Lawrence Livermore National Library NNSA National Nuclear Security Administration SHPO State Historic Preservation Officer LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA HAER No. CA-2353 (Page 3) Part I. Historical Information A. Physical History 1. Date of Erection: 2. Architect: Multiple architects and engineers were involved in the design of the buildings in the Site 300 Process Area.
Architects of the buildings within the Site 300 Process Area that were determined to be contributors to a Site 300 Process Area Historic District are listed below.
Building Increment 1 of Building 805 was designed in by Plant Engineering and constructed in Increment 2 was designed in by Indenco Engineers of San Leandro and completed in The third and final increment was designed in by Garretson, Elmendorf, Zinov and Reibin Architects and Engineers of San Francisco and completed in 1 Building 806 Complex (Buildings 806A and Buildings 806A and were both designed by Rogers Engineering and constructed in Building 807 was designed in by Indenco Engineers of San Leandro, California, and constructed in Pressing Complex (Buildings 817A, and Buildings 817A and were designed by Rogers Engineering between and Building was designed by Ruth and Going, Inc., between and Building 826 was designed in by Indenco Engineers of San Leandro, California and constructed in Chemistry Development Complex (Buildings 827A and Ruth and Going designed the buildings in the Chemistry Development Complex in and construction was complete by 3.
Original and subsequent owners, occupants, uses: The Site 300 Process Area has always been owned by the U.S. Government, as part of the Atomic Energy Commission (AEC) and its successor agencies (currently the Department of Energy/National Nuclear Security Administration [DOE/NNSA]).7 1 Michael Anne Sullivan and Rebecca Ann Ullrich. Historic Context and Building Assessments for the Lawrence Livermore National Laboratory Built Environment, UCRL-TR-234717 (Livermore: Lawrence Livermore National Laboratory, 259 2 Ibid., 3 Ibid. 4 Ibid., 265 5 Ibid., 6 Ibid., 270 7 Lawrence Livermore National Laboratory, High Energy Laser Facility, Written Historical and Descriptive Data, Historic American Engineering Record, National Park Service, U.S. Department of the Interior, page 3.
From Prints and Photographs Division, Library of Congress (HAER No. CA-232; LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA HAER No. CA-2353 (Page 4) The original user was the Lawrence Radiation Laboratory, which evolved into Lawrence Livermore National Laboratory. The occupants had continuously been Lawrence Livermore National Laboratory employees, and the buildings were continuously used for nuclear research, supporting the weapons program, in addition to chemistry, physics, and biomedical research programs at the and Lawrence Berkeley National Laboratory LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA HAER No. CA-2353 (Page 5) B.
Historical Context Cold War Context The following context related to the development of and the Hydrodynamic Test Facilities was created in as part of the Historic Context and Building Assessments for the Lawrence Livermore National Laboratory Built Environment: The primary historic context for assessing the significance of buildings is the Cold War. The Cold War, although still a fairly recent event in US history, has been universally recognized as an event of exceptional significance within the nation s history. The Cold War spanned the forty-six years from to and encompassed a series of events, policy decisions, and conflicts between the United States and Soviet Union over the economic and political orientation of various countries in Europe, Asia, and the Middle East.
In essence, the United States and the Soviet Union had incompatible and conflicting visions for the fate of the post-war world. The US was wedded to a world that closely mirrored its capitalist and democratic economic and political structure, while the Soviet Union hoped for a world that resembled its communist political and economic structure. The Cold War dominated almost every aspect of American life-diplomatic, military, social, economic, scientific, and political. Nevertheless, only two aspects of Cold War history are relevant to the history of the arms race and the more general history of nuclear science.8 Early History The was the brainchild of E. O. Lawrence and Edward Teller, physicists affiliated with the Manhattan Engineering District.
Lawrence and Teller believed that the existing Los Alamos National Laboratory (LANL) was not working aggressively enough to achieve the goal of accelerating advancements in nuclear weaponry. The two physicists advocated for the founding of a second laboratory, determined that the design and production of a thermonuclear weapon in a new facility would be the next advancement in nuclear weaponry. Lawrence and Teller's argument was well received within the Atomic Energy Commission (AEC), as the Soviet Union had just detonated its first atomic weapon in American nuclear policymakers felt an urgency to stay ahead of the Soviet Union both technologically and militarily, fearing the potential actions of an enemy armed with nuclear weapons.
To deter the use of such weapons by the opposition, policymakers were determined to significantly increase the U.S. stockpile. Convinced that a second laboratory would accelerate the process of building up a nuclear arsenal, the AEC established the in Livermore, California, in September of as a second nuclear weapons design facility.9 Herbert York, the first director of articulated four missions for the new laboratory; including designing thermonuclear weapons, providing diagnostic measurements for weapons tests for LANL and developing a controlled 8 Sullivan and Ullrich, Historic Context and Building Assessments, 9 Ibid. LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA HAER No. CA-2353 (Page 6) thermonuclear reaction for power sources, and basic physics research.
York was in strong pursuit of both weapons and non-weapons related research, as he felt that a diversified research program at would attract the country s brightest young scientists.10 Establishment of the HE Process Area administrators noted the need for a remote site to conduct HE tests for the weapons program in administrators decided that the LANL in New Mexico was too distant to be reliable for the fabrication and test firing of various devices.
Considering that obtaining land for a self-sufficient high explosives test site was crucial for the long-term success of the weapons design program, purchased acres of ranch land east of Livermore, California in The first two buildings of s Process Area were Building 805 and the Building 806 Complex, both built in The Process Area would continue to expand to twenty-six buildings with construction being complete in The HE Process program remained dedicated to the creation and progression of HE for through the end of the Cold War in The HE Assembly Process The Site 300 Process Area was devoted to the formulation, blending, casting, pressing, machining, and assembling of HE into billets for use in nuclear weapons.
To make HE billets, chemicals are first formulated and mixed; then dried in ovens; then pressed into forms; and finally, machined into custom shapes. The Site 300 Process Area produced two kinds of HE billets: paste and plastic. Paste billets were extruded into molds, which were then precisely machined. Plastic HE billets were mixed with plastic and then mechanically or isostatically pressed into specific shapes. Mechanically pressed plastic billets would be ready for immediate use, while isostatically pressed billets would have to be machined like paste billets. HE billets would be X-rayed multiple times during the production process to make sure that the billets did not have any cracks or impurities.
Finished HE billets were assembled into device designs.12 Construction Chronology of the Site 300 Process Area The first buildings in the Site 300 Process Area were built in These included Building 805 and the Building 806 Complex. HE billets were machined in the Building 806 Complex and then assembled for hydrodynamic test shots in Building The Site 300 Process Area had expanded by to have buildings devoted to each step of the HE development and fabrication process. These included building which was constructed in to house chemistry laboratories for formulating and testing large batches of HE. Building 809 was also constructed in and was where workers would X-ray HE billets to make sure there were no deformities, cracks, or other mistakes in each of the billets.
Buildings 825 and built in and respectively, housed additional chemistry facilities for the Site 300 Process Area. Building 807 was completed in to house the process area s large-scale mixing and blending work. The Pressing Complex was built between and and contained ovens and isostatic presses that were controlled remotely from a separate building. Between and the Building 828 Complex was built as an experimental remote-machining facility. The 10 Herbert York, Making Weapons, Talking Peace, Physics Today (April 11 Sullivan and Ulrich, Historic Context and Building Assessments, 252 12 Ibid. LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA HAER No.
CA-2353 (Page 7) Chemistry Development Complex opened in and took over many of the former duties of Building 13 Ibid., 253 LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA HAER No. CA-2353 (Page 8) Part IV. Sources of Information A. Architectural drawings: Drawing PSZ55-805-005JA. Plans, Elevations and Details Trim and Assembly Building: Building Number Phase II Construction. Livermore: U.S. Atomic Energy Commission University of California Radiation Lab, revised Drawing PSZ58-805-008JA. Site Building Floor Plan, Sections, Finish Schedule. San Leandro: Indenco Engineers, Inc., Figure A-1, Facility Floor Plan Building 805 in Appendix A Facility Plot Plans and Floor Plans.
Lawrence Livermore National Laboratory, Figure A-2, Facility Floor Plan Building 806 in Appendix A Facility Plot Plans and Floor Plans. Lawrence Livermore National Laboratory, Figure A-3, Facility Floor Plan Building 807 in Appendix A Facility Plot Plans and Floor Plans. Lawrence Livermore National Laboratory, Figure A-9, Facility Floor Plan Building 817 Complex in Appendix A Facility Plot Plans and Floor Plans. Lawrence Livermore National Laboratory,, Plot Plan for the H.E. Lens Facility Building 805 Site San Francisco: Gattetson, Elmendorf, Zinov, Reibin Architects and Engineers, revised B. Interviews: Scott, John E., Site 300 Manager, and Dawn Chase, Special Projects Manager. Site Personal interview. 16 Sept. C. Secondary sources: Hallam, John S.
Energetic Materials Facility: Operated by the Chemistry and Materials Science Department. Livermore: Lawrence Livermore National Laboratory, University of California. Lawrence Livermore National Laboratory, High Energy Laser Facility, Written Historical and Descriptive Data, Historic American Engineering Record, National Park Service, U.S. Department of the Interior, From Prints and Photographs Division, Library of Congress (HAER No. CA-232; Sullivan, Michael A., and Heidecker. Five-Year Re-Evaluation of Historic Building Assessment: Main Site and Site Livermore: Lawrence Livermore National Laboratory, Sullivan, Michael A., and Rebecca A. Ulrich. Historic Context and Building Assessments for the Lawrence Livermore National Laboratory Built Environment.
Livermore: Lawrence Livermore National Laboratory, LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA HAER No. CA-2353 (Page 9) Webster-Scholten, C. P., Ed. Final Site-Wide Remedial Investigation Report, Lawrence Livermore National Laboratory Site Livermore: Lawrence Livermore National Laboratory, York, Herbert. Making Weapons, Talking Peace, Physics Today (April LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA HAER No. CA-2353 (Page 10) Appendix Figure 1. Map of Site 300 from the Historic Context and Building Assessments for the Lawrence Livermore National Laboratory Built Environment report (UCRL-TR-234717).