This HAER documentation has been prepared for the US Department of Energy, Livermore Site Office, with supervision from the California State Historic Preservation Office. In April the National Nuclear Security Administration (NNSA) Livermore Field Office in consultation with the California State Historic Preservation Officer (SHPO) determined Buildings 806A, 817A, 827A, and to be contributors to a Site 300 Process Area Historic District. LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 3) Part I. Historical Information A. Physical History 1. Date of Erection: Buildings 817A and were constructed in Building was constructed in 2.
Architect: Buildings 817A and were designed by Rogers Engineering between and Building was designed by Ruth and Going, Inc., between and 3. Original and subsequent owners, occupants, uses: The complex has always been owned by the U.S. Government, as part of the Atomic Energy Commission (AEC) and its successor agencies (currently the Department of Energy/National Nuclear Security Administration [DOE/NNSA]).3 The original user was the Lawrence Radiation Laboratory, which evolved into Lawrence Livermore National Laboratory.
The occupants had continuously been Lawrence Livermore National Laboratory employees, and the complex was continuously used for nuclear research, supporting the weapons program, in addition to chemistry, physics, and biomedical research programs at the and Lawrence Berkeley National Laboratory 5. Original plans and construction: Rogers Engineering designed Buildings 817A and starting in and construction was complete by Building 817A has a flat roof and an earthen-filled, concrete retaining wall. The structure is covered in a gravel mound. Building is a metal building on a concrete foundation with a gently pitched roof. Buildings 817A and sit at the northwest corner of the Building 817 Complex.
Ruth and Going, Inc., designed building starting in and construction was complete by This building is a concrete bunker with a flat roof. 6. Alterations and additions: The buildings at the Pressing Complex are still being used for their originally designed functions. Minor equipment and mechanical system upgrades have taken place over time. Building was originally a cold-storage facility for HE compounds, and now operates as oven facility to heat and anneal explosives. B. Historical Context Cold War Context The following context related to the development of and the Hydrodynamic Test Facilities was created in as part of the Historic Context and Building Assessments for the Lawrence Livermore National Laboratory Built Environment: 2 Michael Anne Sullivan and Rebecca Ann Ullrich.
Historic Context and Building Assessments for the Lawrence Livermore National Laboratory Built Environment, UCRL-TR-234717 (Livermore: Lawrence Livermore National Laboratory, 265 3 Lawrence Livermore National Laboratory, High Energy Laser Facility, Written Historical and Descriptive Data, Historic American Engineering Record, National Park Service, U.S. Department of the Interior, page 2. From Prints and Photographs Division, Library of Congress (HAER No. CA-232; LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 4) The primary historic context for assessing the significance of buildings is the Cold War.
The Cold War, although still a fairly recent event in US history, has been universally recognized as an event of exceptional significance within the nation s history. The Cold War spanned the forty-six years from to and encompassed a series of events, policy decisions, and conflicts between the United States and Soviet Union over the economic and political orientation of various countries in Europe, Asia, and the Middle East. In essence, the United States and the Soviet Union had incompatible and conflicting visions for the fate of the post-war world. The US was wedded to a world that closely mirrored its capitalist and democratic economic and political structure, while the Soviet Union hoped for a world that resembled its communist political and economic structure.
The Cold War dominated almost every aspect of American life-diplomatic, military, social, economic, scientific, and political. Nevertheless, only two aspects of Cold War history are relevant to the history of the arms race and the more general history of nuclear science.5 Early History The was the brainchild of E. O. Lawrence and Edward Teller, physicists affiliated with the Manhattan Engineering District. Lawrence and Teller believed that the existing Los Alamos National Laboratory (LANL) was not working aggressively enough to achieve the goal of accelerating advancements in nuclear weaponry.
The two physicists advocated for the founding of a second laboratory, determined that the design and production of a thermonuclear weapon in a new facility would be the next advancement in nuclear weaponry. Lawrence and Teller's argument was well received within the AEC, as the Soviet Union had just detonated its first atomic weapon in American nuclear policymakers felt an urgency to stay ahead of the Soviet Union both technologically and militarily, fearing the potential actions of an enemy armed with nuclear weapons. To deter the use of such weapons by the opposition, policymakers were determined to significantly increase the U.S. stockpile.
Convinced that a second laboratory would accelerate the process of building up a nuclear arsenal, the AEC established the in Livermore, California, in September of as a second nuclear weapons design facility.6 Herbert York, the first director of articulated four missions for the new laboratory; including designing thermonuclear weapons, providing diagnostic measurements for weapons tests for LANL and developing a controlled thermonuclear reaction for power sources, and basic physics research.
York was in strong pursuit of both weapons and non-weapons related research, as he felt that a diversified research program at would attract the country s brightest young scientists.7 5 Sullivan and Ullrich, Historic Context and Building Assessments, 6 Ibid.,, 247 7 Herbert York, Making Weapons, Talking Peace, Physics Today (April LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 5) Establishment of the HE Process Area administrators noted the need for a remote site to conduct HE tests for the weapons program in administrators decided that the LANL in New Mexico was too distant to be reliable for the fabrication and test firing of various devices.
Considering that obtaining land for a self-sufficient high explosives test site was crucial for the long-term success of the weapons design program, purchased acres of ranch land east of Livermore, California in The first two buildings of s Process Area were Building 805 and the Building 806 Complex, both built in The Process Area would continue to expand to twenty-six buildings with construction being complete in The HE Process program remained dedicated to the creation and progression of HE for through the end of the Cold War in 8 Sullivan and Ulrich, Historic Context and Building Assessments, 252 LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 6) Part II. Structural/ Design/ Equipment Information A.
General Statement 1. Architectural character: The buildings in the Pressing Complex look like the other buildings in the Site 300 Complex, as they share a similar visual language of non- ornamented, industrial construction, made to serve utilitarian purposes. Highly utilitarian in character, The Pressing Complex buildings are void of ornamental features or decorative finish treatments. Constructed as the primary control facility for the complex, the rectangular central node of Building 817A is partially enclosed by three poured concrete walls; two angled concrete walls flank from the central western elevation. Earthen infill and gravel covers the flat roof of this structure. The building contains two control rooms and an office.
Building is rectangular in footprint and comprised of one double-height room with an exterior staircase. Clad in painted metal/Masonite panels, the building features a gently pitched roof. The facade of the one-room Building features a single poured-in-place concrete elevation in the form of an isosceles trapezoid. With a flat roof, the building is topped with gravel, creating a steep earthen slope on all remaining sides. 2. Condition of fabric: Efflorescence and minor cracks are present on the fa ades of buildings 817A and Paint is peeling off of Building s Masonite panels, and there is some exterior oxidation of the metal components toward the base of the building. B. Description of Exterior 1.
Overall dimensions: The building is approximately 380 -0 by 560 -0 at the main rectangular volume, and 180 -0 by 180 -0 at the square addition at the northwest corner. Rectangular in footprint, Building 817A is a one-story, 459-gross-square-foot bunker. Building is a rectangular metal building with a double-height single story, measuring gross square feet, and an exterior staircase. Building is a rectangular one-story bunker with 565 gross square feet. 2. Foundations: Poured concrete slab foundations are present at all complex buildings. 3. Walls: Constructed as the primary control facility for the complex, the rectangular central node of Building 817A is partially enclosed by three poured concrete walls; two angled concrete walls flank from the central western elevation.
Building has metal walls with Masonite panels. The fa ade of the one-room Building features a single poured-in-place concrete elevation in the form of an isosceles trapezoid. 5. Porches and loading docks: Concrete walkways surround the perimeter of Building 817A and portions of Buildings and LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 7) 7. Openings: a. Doorways and doors: Building 817A has three metal exterior doors on its east elevation. Building has one paired metal-door entrance at its north elevation and a matching door at its south elevation. Building has one paired metal-door entrance at its b. Windows and shutters: There are no windows present at this building complex. 8. Roof: a.
Shape, covering: Earthen infill and gravel covers the flat roof of Building 817A. Building features a gently pitched roof. Building has a flat roof topped with gravel, creating a steep earthen slope on all remaining sides. C. Description of Interior 1. Floor plans: Building 817A contains two control rooms and an office. Buildings and both consist of one room. Historically, Building 817A housed a control room/office and an equipment room. The control room operated the presses and ovens in the complex, located in buildings and respectively. Powdered HD was dried in ovens, including those found in Building before being pressed into various shapes of billets. Building s single room held multiple presses, which would press dried powdered HE into billets. 3.
Flooring: Finished concrete and vinyl flooring comprise the original flooring of the buildings in this complex. 4. Wall and ceiling finish: a. Wall finish: The concrete interior walls are finished with white panels of an unknown material. b. Ceiling finish: The ceilings of machining areas are painted white with exposed structural framing, mechanical piping and corrugated metal roofing. Remote control rooms have dropped, acoustical ceilings. 6. Openings: a. Doorways and doors: There are no doors present in the interior of this building complex. b. Windows: There are no windows present in the interior of this building complex. 8. Mechanical equipment: a. Heating, air conditioning, ventilation: The heating, air conditioning and ventilation equipment of the Pressing Complex is unknown. b.
Lighting: Suspended fluorescent fixtures are present throughout the interior. Several types of industrial-grade exterior light fixtures surround the buildings, mounted directly onto the walls. LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 8) D. Machines: Building contains isostatic presses, including a 14-inch press and an 18-inch press. Building contains ovens. E. Site Layout: The Pressing Complex is located in the southeastern portion of the Site 300 Complex. Buildings 817A and sit at the northwest corner of the Pressing Complex.
Building sits to the south of Buildings 817A and A cement-lined trench, dry well, two HE process rinse water lagoons (removed from service in and a septic tank with two cesspools are auxiliary landscape features that contributed to the functions of Building The disposal lagoon was decommissioned and closed in 9 Ibid., LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 9) Part III. Operations and Process A. Operations: The Pressing Complex was designed to turn powdered HE into pressed and dried billets of explosives, and was in use for more than forty years.10 The complex consists of eight structures, with buildings 817A, and acting as the primary buildings in the complex.
Buildings 817A, and were constructed between and and served as the initial HE Press and Oven Facility for the Site 300 Process Area. B. Technology: Building 817A contained electronic remote controls for the ovens and presses located in other buildings in the Pressing Complex. Theses operations were remote controlled to keep workers from being injured by an accidental detonation. Building housed 14-inch and 18-inch isostatic presses that turned dried powdered HE into billets. Building housed two ovens that would dry the powdered HE on sheets before it was pressed into billets. C. End Product: The billets produced at the Pressing Complex were machined and then assembled at other buildings in the Site 300 Process Area.
10 Sullivan and Ulrich, Historic Context and Building Assessments, LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 10) Part IV. Sources of Information A. Architectural drawings: Figure A-9, Facility Floor Plan Building 817 Complex in Appendix A Facility Plot Plans and Floor Plans. Lawrence Livermore National Laboratory, B. Interviews: Scott, John E., Site 300 Manager, and Dawn Chase, Special Projects Manager. Site Personal interview. 16 Sept. C. Secondary sources: Hallam, John S. Energetic Materials Facility: Operated by the Chemistry and Materials Science Department. Livermore: Lawrence Livermore National Laboratory, University of California.
Lawrence Livermore National Laboratory, High Energy Laser Facility, Written Historical and Descriptive Data, Historic American Engineering Record, National Park Service, U.S. Department of the Interior, From Prints and Photographs Division, Library of Congress (HAER No. CA-232; Sullivan, Michael A., and Heidecker. Five-Year Re-Evaluation of Historic Building Assessment: Main Site and Site Livermore: Lawrence Livermore National Laboratory, Sullivan, Michael A., and Rebecca A. Ulrich. Historic Context and Building Assessments for the Lawrence Livermore National Laboratory Built Environment. Livermore: Lawrence Livermore National Laboratory, Webster-Scholten, C. P., Ed.
Final Site-Wide Remedial Investigation Report, Lawrence Livermore National Laboratory Site Livermore: Lawrence Livermore National Laboratory, York, Herbert. Making Weapons, Talking Peace, Physics Today (April LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 11) Appendix Figure 1. Building 817 Complex, Facility Plot Plan. (Lawrence Livermore National Laboratory Archives) LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 12) Figure 2. Building 817A, Facility Plot Plan. (Lawrence Livermore National Laboratory Archives) LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 13) Figure 3.
Building Facility Plot Plan. (Lawrence Livermore National Laboratory Archives) LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 14) Figure 4. Building Facility Plot Plan. (Lawrence Livermore National Laboratory Archives) LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 15) Figure 5. Building 817 Complex looking north (Lawrence Livermore National Laboratory Archives) Figure 6. Wall between Buildings 817A and looking south (Lawrence Livermore National Laboratory Archives) LAWRENCE LIVERMORE NATIONAL LABORATORY, SITE HIGH EXPLOSIVES PROCESS AREA, PRESSING COMPLEX HAER No. CA-2353-D (Page 16) Figure 7.
Building looking south west (Lawrence Livermore National Laboratory Archives)