Bishop Creek Hydroelectric System, Plant 4, Cottage No. 1, Bishop Creek, Bishop
Bishop Creek Hydroelectric System, Plant 4, Cottage No. 1, Bishop Creek, Bishop, Inyo County, CA. Surveyed as HAER CAL,14-BISH.V,5A-, with a 2,619-word written history.
From the record
“Building 102 Plant 4 (formerly Cottage, Building No. 1, Plant 4), a small bungalow cottage, is a rare, surviving example of early worker's housing at the Bishop Creek Hydroelectric System.”
Written record, HAER CAL,14-BISH.V,5A- survey. Machine-read text.
Surveyed by the federal HAER program as HAER CAL,14-BISH.V,5A- · the record runs 2619 words · one of 71 surveyed structures published for this county.
Source document
Quoted word for word from HAER CAL,14-BISH.V,5A-.
Not written, edited or summarised by this site.
Near Bishop Creek in North 1/2 of the Southeast 1/4 of Section 19, Township 7 South, Range 32 East, Inyo County, California. Eastern Sierra Nevada approximately 2,5 miles southwest of the town of Bishop, California, and 225 air miles due north of Los Angeles. Date of Construction: Builder: Unknown
Significance
2489 words
The headings the report itself prints. Each one jumps to where it begins.
Source document
Quoted word for word from HAER CAL,14-BISH.V,5A-.
Not written, edited or summarised by this site.
Building 102 Plant 4 (formerly Cottage, Building No. 1, Plant 4), a small bungalow cottage, is a rare, surviving example of early worker's housing at the Bishop Creek Hydroelectric System. Built in Plant 4 was the first on the Bishop Creek System, and it remains the system's operating headquarters. This house is one of the four earliest cottages built for employees at Plant 4. The Bishop Creek System is considered significant for its role: (1) in the expansion of hydroelectric generation technology, (2) in the development of eastern California, and (3) in the development of long-distance power transmission and distribution. Report Prepared By: Ward Hill Architectural Historian BioSystems Analysis, Inc.
303 Potrero Street, Suite Santa Cruz, CA Date: January 19, BISHOP CREEK HYDROELECTRIC SYSTEM, PLANT 4, COTTAGE NO. 1 (BUILDING NO. HAER NO. CA-145-4-A (Page 2) L
Description
Building 102 Plant 4 is a small, Craftsman style cottage about 170 feet south of the Bishop Creek Hydroelectric System Plant 4 powerhouse. This cottage was part of a residential enclave of 12 houses, most of which have been demolished, where the Plant 4 workers lived. The project area is about five miles southwest of the town of Bishop, Inyo County, California. The Bishop Creek System is primarily located along the south, middle, and north forks of Bishop Creek on the steep eastern slopes of the southern Sierra Nevada Range. Plant 4 is one of five plants sited at varying elevations along Bishop Creek. Situated in the middle of the Bishop Creek System, Plant 4 is northeast of Plants 2 and 3, and southwest of Plants 5 and 6.
Building 102 Plant 4, set about 3 feet higher than the street, is on a site that slopes slightly down toward the low, stone retaining wall separating the front yard from the street west of the house (Photo 1). A concrete stair with six steps penetrates through the stone wall providing access to the front yard and the house. The small front yard consists of a lawn and two, large mature trees flanking the house. A curving concrete path leads from the front of the house to the rear along the south elevation (Photo 2). Three more steps lead up from the front yard to the house's entrance porch and the off-center front door. Building 102 Plant No.
4 is a single-story with basement, square plan (27 X 27 feet), bungalow style house characterized by its steeply-pitched, transverse gable roof and a prominent front entrance porch along the west elevation (Photos 3, 4 and 5). Structurally, the building is stud-wall, wood-frame construction set on a perimeter concrete foundation. The exterior walls are covered with rough textured stucco, except for the areas covered with wood shingles under the side gables. The roof is covered with asphalt shingles. An old front elevation drawing of this house in the files of Southern California Edison (SCE) indicates that the exterior surfaces now stuccoed (including the front porch) were originally covered with clapboard siding above a base of stone facing.
The wood siding on many of the buildings in the Bishop Creek System was covered with asbestos shingles or stucco in recent years as part of a program to reduce fire hazards (Theodoratus Cultural Research The roof was also originally covered with wood shingles, and there were decorative scrolls protruding above the peak of the end gables. The roof has exposed rafters under the front and side eaves. The front exposed rafters have decorative rounded and notched ends (Photo 6). One metal chimney projects above the gable ridge. Building 102 Plant 4 has 1-over-l, wood-sash, double-hung windows framed with plain boards, except for the fixed, multi-pane window used for the glazed rear porch. Large vents BISHOP CREEK HYDROELECTRIC SYSTEM, PLANT 4, COTTAGE NO. 1 (BUILDING NO- HAER NO.
CA-145-4-A (Page 3) open below the ridges of the side gables. The glazed, rear porch across the entire rear elevation is a later addition to the house (photo 8). According to drawings in the SCE files, the house originally had a screened-in porch projecting 4 feet from the right half (off the kitchen) of the rear elevation. The open, front entrance porch is formed by a large, shed roof projecting from the house's main gable. The front porch roof is supported by four heavy, square-shaped, chamfered columns set on a low parapet wall enclosing the porch. Two porch columns symmetrically flank each side of the central stairs leading to the entrance porch (Photo 2).
The columns have overscaled decorative brackets forming capitals below the heavy beam along the front of the porch roof (Photo 6 and 7). The front entrance door has inset panels below a nine pane window. The house has about 720 square feet of interior space divided into five rooms: a kitchen, a bathroom, a dining room, a bedroom and a living room. Except for one small hall joining the kitchen and the dining room, the house's compact plan has no halls with the rooms opening directly one to another. Although the original plan is essentially intact, the interior has been remodeled into offices in recent years.
As part of this remodeling, three walls of the living room are covered with new wood paneling and two large, flat fluorescent lighting fixtures were installed on the ceiling, now covered with acoustical tiles (Photos 9 and The plain boards framing the interior door and window openings in the living room appear to be original. The bedroom also has an acoustical tile ceiling with flat fluorescent lighting fixtures (Photos 11 and A built-in storage cabinet on one wall of this room is also a recent alteration. The dining room also has a ceiling with fluorescent lighting and acoustical tiles (Photo The built-in cabinet and closet on one wall in this room is a later addition. The dining room's paneled door and hardware is original.
Original architrave door moldings survive in the hallway from the dining room to the kitchen (Photo The fixtures and cabinets in the kitchen and bathroom have recently been remodeled (Photo 15 and The original rear door with inset panels below a window opens from the kitchen into the glazed rear porch area (Photos 17 and The glazed rear porch, a single space with a concrete floor, is a later addition that projects from the rear wall of the house. H.
Historical Context
The Bishop Creek Hydroelectric System is significant in the history of hydroelectric power generation technology, the development of eastern California, and the development of long- BISHOP CREEK HYDROELECTRIC SYSTEM, PLANT 4, COTTAGE NO. 1 (BUILDING NO. HAER NO. CA-145-4-A (Page 4) distance power transmission and distribution. The hydroelectric electric system is an early example of a high-head, impulse water wheel, high-voltage electric generation system. The system exhibits a high level of innovative planning, maximizing the production of energy by combining use of the steep slope of the eastern Sierra Nevada with specialized generation technology.
The five power plants of the Bishop Creek System were built between and The power from the system supplies customers in southern California and Nevada. The first hydroelectric power generation along Bishop Creek was a small plant operated by the Bishop Light and Power Company. The plant, a Stanley polyphase generator horsepower) driven by a 48-inch Pelton wheel, generated power for local use. The impetus for the development of the Bishop Creek System was the discovery of economic minerals in the Tonopah and Goldfield areas of Nevada. The local power companies in these areas generated electricity by burning fuels, an expensive and unreliable source of power for industrial applications. Loren B. Curtis and Charles M.
Hobbs arrived in the Tonopah and Goldfield areas in because of their interest in mining. Curtis and Hobbs recognized that the economic potential of mining in this area could not be tapped unless a reliable and inexpensive power source could be developed. Curtis, an engineer, decided that Bishop Creek in the eastern Sierra would be the best location for production of hydroelectric power for the nearby Nevada mining areas. Hobbs, a banker and financier, obtained financial backing for the project, and then incorporated with his partner as the Nevada Power, Mining and Milling Company in December 24, Construction commenced in January on the first generating plant, Power Plant 4; nine months later, in September electricity was delivered to the Goldfield substation.
Since Nevada Power, Mining and Milling had secured contracts for power delivery to the mining companies in Goldfield and Tonopah, there was a ready market for Bishop Creek electricity. The inexpensive power from Bishop Creek made it possible to mine economically in these areas, producing a new mining boom and a period of posterity in Nevada (Elliott On January 5, the Nevada-California Power Company was incorporated as the successor to Nevada Power, Mining and Milling Company. In Nevada-California Power expanded Power Plant 4, and they purchased the capital stock of Hillside "Water Company, thus permitting the construction of additional plants along Bishop Creek. In a fifth operating unit was installed at Power Plant 4 and construction was completed on Power Plant 2.
Power Plant 5 was constructed in and South Lake was enlarged. # BISHOP CREEK HYDROELECTRIC SYSTEM, PLANT 4, COTTAGE NO. 1 (BUILDING NO. HAER NO. CA-145-4-A (Page 5) Each power plant was originally developed with an associated residential complex occupied by operating and maintenance crews. A number of new houses, like Building 102 at Plant 4, were constructed during the expansion period of to accommodate the additional workers needed to operate the power plants. Building 102 Plant 4 is one of four bungalow style houses built in at Plant 4, the earliest worker houses constructed at this plant (Theodoratus Cultural Research A-72).
The company development of employee living areas, especially at Plant 4, permitted comprehensive planning seldom seen in privately developed residential areas during this period. The setting of Building 102 Plant 4 still retains many elements of the old residential planning in this area, including picturesque curving streets, houses sited on terraces with stone retaining walls, manicured front lawns with unified groupings of shade trees, and integrally designed lighting standards. After the expansion period of the Bishop Creek System produced substantially more power than was needed by its current market, still primarily mining operations in Nevada.
In an attempt to expand the market for Bishop Creek power, the directors of Nevada- California Power Company incorporated the Southern Sierra Power Company as a subsidiary in with its main purpose being to service the power needs of southeast. California. The total output of the Bishop Creek plants was kW in when construction began on a transmission line to San Bernardino where a steam plant was built. Power Plant 3 was completed in adding kW to the system. During and the southern California system was expanded substantially, and in Power Plant 6 was completed increasing the system's capacity to kW. By the end of the Bishop Creek System was essentially complete with all five plants existing today in operation.
Southern Sierra Power Company, which continued to expand by buying smaller power companies, played a significant role in the development of southeastern California, particularly the Imperial Valley. In the longest power transmission line in the world (at the time) was completed, delivering power from Bishop Creek to the Imperial Valley. As a result of the electrical power now available, the population of the Imperial Valley grew from about 50 to over in the next 20 years. During the the power-generating system was "fine- tuned" to extract as much power as possible from the existing plants.
Much of the company's 'The creation of Southern Sierra Power Company consolidated several associated companies, including the Nevada-California Power Company, the Bishop Light and Power Company, the Corona Gas and Electric Company, the Lytle Creek Power Company and the Hillside Water Company. BISHOP CREEK HYDROELECTRIC SYSTEM, PLANT 4, COTTAGE NO. 1 (BUILDING NO. HAER NO. CA-145-4-A (Page 6) resources at this time were used to market energy at the far reaches of the distribution network and to purchase other power companies. There was only limited development in Bishop Creek during the because of the world wide depression.
Increased competition from rival companies producing cheaper energy on the Colorado River forced the Bishop Creek company to withdraw from the Imperial and Coachella valley markets. The Nevada-California Electric Corporation, formed as a holding company in for the companies associated with Southern Sierra Power Company, became an operating company in when the subsidiary companies were dissolved and the operating properties transferred to the parent company. In the company changed its name to California Electric Power Company (later known as Calectric). The properties of Calectric were acquired by Southern California Edison Company in through a merger consolidation. Southern California Edison (SCE) is the present operator of the Bishop Creek plants.
Since automation of much of the power plant equipment and centralizing of many functions has resulted in the elimination of many of the on-site employees. During the all the housing units at Plants 2 and 3 were demolished, leaving structures only at Plant 4, 6 and the Control Station (near Plant 5). m.
Sources
Coleman, Charles M. P. G. and E. of California: The Centennial Story of Pacific Gas and Electric Company, McGraw-Hill Book Company, Inc., New York. Elliott, Russell R. History of Nevada. University of Nebraska Press, Lincoln. Intermountain Research An Architectural and Historical Evaluation of Structures Associated with the Bishop Creek Hydroelectric Power System, Inyo County, California, December, Unpublished report prepared for Southern California Edison. Theodoratus Cultural Research, Inc. Evaluation of the Historic Resources of the Bishop Creek Hydroelectric System, July, Unpublished report prepared for Southern California Edison. BISHOP CREEK HYDROELECTRIC SYSTEM, PLANT 4, COTTAGE NO. 1 (BUILDING NO. HAER NO. CA-145-4-A (Page 7) Weitze, Karen J. California's Mission Revival.
Hennessey and Ingalls, Inc., Los Angeles, California. Whiffen, Marcus American Architecture Since MIT Press, Cambridge, Massachusetts. IV. PROJECT INFORMATION This Historic American Engineering Record documentation of Building 102 Plant 4, a cottage at Plant 4 of the Bishop Creek Hydroelectric System, was undertaken because the building represents excess housing. SCE is continuing to automate the Bishop Creek power plants. The automation of the power plants has made it unnecessary to have on-site crews, thus, residential units like this cottage have become obsolete. BISHOP CREEK HYDROELECTRIC SYSTEM, PLANT 4, COTTAGE NO. 1 (BUILDING NO. HAER NO. CA-145-4-A (Page 8) torage Construction rPffice U107 Flowline Shed 124 Recreation Hall Rock Walls Bridge manor ^KUJiiv mmtiMUJiA^iiui.
aiotjuvi, ri^A^i * , COTTAGE NO.l (BUILDING NO. 0 HAERNO. CA-145-4-A -. . *: (Page?) <: U -o f\ A fO \ i J-. O i; H ' V o .71 o > r~ O tl) r 1 i-H UJ , r-* CM r> ( ) ^ < *. : ty a E=Q *iH <~i H /I ! i I II I II I ' "> OJ BISHOP CREEK HYDROELECTRIC SYSTEM, PLANT 4, COTTAGE (BUILDING NO. 'J '* " ' ^^ ! ~~~ HAER NO. CA~145-4-A (Page 10)
The federal surveyors worked through Bishop building by building. These are the other structures
they measured and filed a report on, longest report first.
Written history. Quoted verbatim from HAER CAL,14-BISH.V,5A-. United States federal work, no copyright under 17 U.S.C. 105.
Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.