See Building 001 Record ROCKETDYNE MANUFACTURING FACILITY, BUILDING 002 HAER No. CA-2355-B (Page 2) Part I. Historical Information A. Physical History: 1. Date(s) of construction: 2. Architect/Engineer: Unknown 3. Builder, contractor, suppliers: Unknown 4. Original plans and construction: See Supplemental Materials B. Historical Context: See Building 001 Record Part II. Architectural and Structural/Design/Equipment Information A. General Statement: 1. Character: Similar to many of the other buildings at the Rocketdyne manufacturing facility, Building 002 is a rectangular shaped utilitarian structure with a flat metal roof supported by metal trusses. The two-story building has a cement foundation, and concrete exterior walls.
Distinguishing features include the large metal roll-up doors found on all four elevations, the large metal industrial tripartite 2 x 5 windows on the north elevation, and the corrugated metal awning extending from the south elevation. The interior is divided by wood-frame partitions with a concrete-slab floor. The ceiling is supported by metal trusses and contains exposed ducting, pipes, metal rafters, and beams. Industrial lighting is provided by suspended fluorescent lights. Original machinery, including a drill press and a lathe, are still housed in the building. 2. Condition of fabric: There is currently ongoing deterioration caused primarily by water damage due to the extensive roof leaks.
The brickwork appears to have been consistently maintained in the past; however, there is evidence of deterioration, most likely from dripping water and dampness on the walls. The roof trusses generally appear to be in fair condition but show evidence of rust. The exposed wood ceiling shows evidence of localized discoloration from water leaks that may also indicate rot, and there are holes in the ceiling. The metal industrial windows show evidence of rust but generally appear to be in fair condition. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 002 HAER No. CA-2355-B (Page 3) B. Description of Exterior: 1. Overall dimensions: Building 002 is a rectangular building with overall dimensions of approximately 140 long by 80 wide. The building is approximately square feet. 2.
Foundations: Building 002 has a concrete foundation. 3. Walls: The exterior walls consist of reinforced concrete. 4. Structural system, framing: Building 002 s structural system consists of a prefabricated steel frame attached to pre-cast concrete wall panels, steel girders and beams. 5. Porches, stoops, balconies, bulkheads: None 6. Openings: a. Doorways and doors: Along the west elevation of Building 002 is a large metal roll-up door providing vehicular access to the facility. Imbedded within the metal garage door is a smaller pedestrian doorway with partial glazing. On Building 002 s north elevation there are three metal roll-up garage doors near the northwest corner of the building. The western most garage door contains a single pedestrian doorway embedded within.
Near the east side of the north elevation is a single metal door with partial glazing. On Building 002 s primary (east elevation, there is a single metal door with partial glazing and a metal pull-handle. There are four large metal roll-up garage doors located near the north end of the east elevation providing additional vehicular access to the Building. The south elevation contains two additional large metal garage doors near the southwest corner of the Building. The doors are shaded by a large, corrugated metal awning. Near the southeast corner of the Building there is a small doorway containing a s ingle metal, partially glazed door beneath a small metal canopy. b. Windows: There are eight tripartite groupings of pivot sash windows arranged in a row along Building 002 s west elevation.
The windows are steel frame with six-light configuration. Located along the north elevation are two large window openings. These window openings share a similar arrangement of steel frame windows organized in three columns, each consisting of pivot sash and fixed windows composing a ten-light configuration. There are ten (five on the Building s second floor and five on the ground floor) sets of windows arranged in tripartite groupings of four-light pivot sash windows along the building s east elevation. Aluminum awnings provide shade for ROCKETDYNE MANUFACTURING FACILITY, BUILDING 002 HAER No. CA-2355-B (Page 4) some of the windows. Some of the window openings have been infilled with wood paneling. There are no windows on Building 002 s south elevation. 7. Roof: a.
Shape, covering: The roof is a pitched metal surface surrounded by a short parapet wall. C. Description of Interior: 1. Floor plans: The original floor plan was dominated by the maintenance shop. Building 004 also included a stock room and carpenter shop at its southeast corner. On the northwest corner was a wash rack. In the building was expanded, doubling in size. The new addition included a large machine shop and relocated several exterior wall panels opening up the interior space. Since its original construction and expansion, Building 002 has been further divided, adding wood framed plaster walls to create small rooms. Second floor office spaces have been added as well as temporary bulkheads throughout the structure. 2.
Stairways: Three wood-frame staircases are located near the central east/west axis of the building. A fourth staircase is located at the southeast corner of the Building. 3. Flooring: Flooring throughout Building 002 is concrete. 4. Wall and ceiling finish: Walls very in finishes from concrete along the perimeter of the Building, to wood framed, plaster partitions in the interior spaces. Temporary aluminum framed bulkheads have been added to further divide the space. The ceiling consists of exposed corrugated metal composing the Building s roof. 5. Openings: a. Doorways and doors: There are several doorways leading to different areas of Building 002 s interior. These doorways consist of single and double metal doors.
Doors along the Building s exterior are covered above in the exterior features section. 6. Mechanical equipment: a. Heating, air conditioning, ventilation: The ventilation ducts are exposed in the working bays of Building b. Lighting: Lighting throughout the Building is provided by fluorescent fixtures hanging from the ceiling. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 002 HAER No. CA-2355-B (Page 5) Part III. Operations and Process A. Operations: Building 002 housed a maintenance shop, carpenter shop, and offices. Part IV. Sources of Information A. Primary