BlockBefore

Rocketdyne Manufacturing Facility, Building 029, 6633 Canoga Avenue, Canoga Park

Rocketdyne Manufacturing Facility, Building 029, 6633 Canoga Avenue, Canoga Park, Los Angeles County, CA. Surveyed as HAER CA-2355-I, with a 663-word written history.

From the record

“Rocketdyne Manufacturing Facility, Building 029, 6633 Canoga Avenue, Canoga Park, Los Angeles County, CA”

Survey record header. Machine-read text.

Surveyed by the federal HAER program as HAER CA-2355-I · the record runs 663 words · one of 386 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Location

63 words

Source document Quoted word for word from HAER CA-2355-I. Not written, edited or summarised by this site.

The Rocketdyne Manufacturing Facility is located in Canoga Park, California. The facility is situated on an approximately 47-acre site (portion of Lot 2 Tract No. and portion of Lot 1 Tract No. bounded by Victory Boulevard on the south, Canoga Avenue on the east, and Owensmouth on the west. Building 029 is located at latitude: longitude: Present Owner/ Occupant: United Technologies Corporation (UTC)/vacant

Written history

488 words

Source document Quoted word for word from HAER CA-2355-I. Not written, edited or summarised by this site.

See Building 001 Record ROCKETDYNE MANUFACTURING FACILITY, BUILDING 029 HAER No. CA-2355-I (Page 2) Part I. Historical Information A. Physical History: 1. Date(s) of construction: 2. Architect/Engineer: None 3. Builder, contractor, suppliers: Unknown 4. Original plans and construction: None 5. Alterations and additions: Earthquake Safety Relocation of Tooling Plastics Lab B. Historical Context: See Building 001 Record Part II. Architectural and Structural/Design/Equipment Information A. General Statement: 1. Character: The South Shed (Building is located near the southwest corner of the complex. Building 029 is a large single-story utilitarian prefabricated metal structure with a pitched roof.

Building 029 s distinguishing features include a large, full-length, metal shed-roof style canopy supported by metal brackets. The interior space is separated into multiple bays with concrete-slab floors separated by metal partitions. The bays are accessed via door openings of various scale, located along the east elevation. The ceilings are made up of exposed corrugated steel supported by metal trusses, brackets, and rafters. Industrial lighting is provided by suspended fluorescent lights. 2. Condition of fabric: Building 029 appears to be in good condition with no major indications of deterioration. B. Description of Exterior: 1. Overall dimensions: Building 029 is a rectangular building with overall dimensions of approximately 220 long by 40 wide.

The building is approximately square feet. 2. Foundations: Building 029 sits on a reinforced concrete foundation. 3. Walls: The exterior walls consist of prefabricated corrugated steel sheathing and horizontal wood siding. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 029 HAER No. CA-2355-I (Page 3) 4. Structural system, framing: Building 029 s structural system consists of a prefabricated steel frame attached to corrugated steel sheathing and steel girders and beams. Portions of the Building also appear to be made of wood framing with horizontal wood siding. 5. Porches, stoops, balconies, bulkheads: None 6. Openings: a. Doorways and doors: Building 029 has several door openings located along its east (primary) elevation.

The door openings are of various sizes and uses, including single and double width garage door openings and single and double wide pedestrian entrances. The seven garage door openings on the east elevation consist of metal roll-up doors. In addition to the garage doors, there are eight pedestrian doorways on the east elevation. Near the Buildings south end, there are two single, metal, partially glazed doors. Near the center of the Building are three pairs of metal doors, no glazing. At the north end of the Building, there are three single metal doors, one of which is partially glazed. One door near the north end is topped with a metal shed-roof style canopy. 7. Roof: a. Shape, covering: Building 029 has a low sloping pitched roof with a corrugated steel surface. b.

Dormers, cupolas, towers, clerestories, monitors: A variety of roof-top ventilators are located on the Building. Additional features on Building 029 s roof include large flood lights directed at the open space in front of the Building. Part III. Sources of Information A. Primary

In context

Canoga Park, California The place record: every map, photograph and survey of this town.
Los Angeles County, California 1,078 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Canoga Park

15 records

The federal surveyors worked through Canoga Park building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
Pacific FurnaceHAER CA-22804,909 words
Rocketdyne Manufacturing FacilityHAER CA-2355-O1,369 words
Rocketdyne Manufacturing FacilityHAER CA-2355-B1,187 words
Rocketdyne Manufacturing FacilityHAER CA-2355-L1,060 words
Rocketdyne Manufacturing FacilityHAER CA-2355-D899 words
Rocketdyne Manufacturing FacilityHAER CA-2355-C880 words
Rocketdyne Manufacturing FacilityHAER CA-2355-J722 words
Rocketdyne Manufacturing FacilityHAER CA-2355-F655 words
Rocketdyne Manufacturing FacilityHAER CA-2355-N596 words
Rocketdyne Manufacturing FacilityHAER CA-2355-K570 words
Rocketdyne Manufacturing FacilityHAER CA-2355-P556 words
Rocketdyne Manufacturing FacilityHAER CA-2355-E541 words
Rocketdyne Manufacturing FacilityHAER CA-2355-G519 words
Rocketdyne Manufacturing FacilityHAER CA-2355-M498 words
Rocketdyne Manufacturing FacilityHAER CA-2355-H490 words

Provenance

  • Written history. Quoted verbatim from HAER CA-2355-I. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.