See Building 001 Record ROCKETDYNE MANUFACTURING FACILITY, BUILDING 003 HAER No. CA-2355-C (Page 2) Part I. Historical Information A. Physical History: 1. Date(s) of construction: 2. Architect/Engineer: Unknown 3. Builder, contractor, suppliers: Unknown 4. Original plans and construction: See Supplemental Materials B. Historical Context: See Building 001 Record Part II. Architectural and Structural/Design/Equipment Information A. General Statement: 1. Character: Building 003 is located near the northeast corner of Building Building 003 is a small single-story concrete structure with a flat roof an overhanging eaves.
Designed as a utilitarian structure with mid-century modern characteristics, Building 003 distinguishing features include large overhanging eaves, aluminum framed door and windows and a large aluminum squared bay window. The interior is divided into several offices with carpet flooring. The drop-down ceiling is made up of metal framing and acoustic ceiling tiles. Industrial lighting is provided by suspended fluorescent lights. 2. Condition of fabric: Building 003 appears to be in good condition with no major indications of deterioration. B. Description of Exterior: 1. Overall dimensions: Building 003 is a rectangular shaped building with overall dimensions of approximately 60 long by 40 wide. The building is approximately square feet. 2.
Foundations: Building 003 sits on a reinforced concrete foundation. 3. Walls: The exterior walls consist of stucco over metal lath and plywood sheathing. 4. Structural system, framing: Building 003 s structural system consists of steel framing including structural steel and light-gage framing with galvanized materials. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 003 HAER No. CA-2355-C (Page 3) 5. Porches, stoops, balconies, bulkheads: Building 003 s primary entrance consists of an elevated concrete stoop located slightly off center on the main elevation (east) and is accessed via a winding concrete ramp with metal railings.
Building 003 is connected to the adjacent structure of Building 001 by a breezeway enclosed with six floor-to-ceiling plate glass windows, surmounted by four smaller plate glass windows and two vents across the front. 6. Openings: a. Doorways and doors: Building 003 s primary entrance is located on the east elevation, slightly off center between two large sliding windows. The entry consists of a pair of fully glazed aluminum doors located beneath a fixed transom. Along the north elevation of Building there are additional doors providing access to a small utility structure with a shed roof. The doors on this structure include a single, partially glazed, metal door and a pair of louvered metal doors. b.
Windows: Fenestration on the Building s primary elevation (east) includes two large aluminum sliding windows flanking the primary entrance. There does not appear to be any additional windows on Building 003 s other elevations. 7. Roof: a. Shape, covering: Building 003 has a flat roof with a tar and gravel surface. b. Cornice, eaves: Building 003 s eaves overhang and there is no other distinguishing ornamentation. c. Dormers, cupolas, towers, clerestories, monitors: None C. Description of Interior: 1. Floor plans: Historic building plans show several offices arranged around open spaces used for secretarial purposes. At the southeast corner of the building is a conference room adjacent to the lobby and control room. 2. Flooring: Building 003 contained both carpeting and vinyl flooring.
The carpet installed was Dupont Antron III, dyed nylon carpeting manufactured by Patrick Carpet Mills. Vinyl flooring consisted of Armstrong Standard Excelon Tile, 1/8 thick, imperial texture. 3. Wall and ceiling finish: The ceiling in Building 003 s interior spaces were made up of a drop ceiling and Armstrong white minaboard acoustical ceiling panels with plastic finish. The interior walls were painted with Beach semi-gloss paint. 4. Mechanical equipment: ROCKETDYNE MANUFACTURING FACILITY, BUILDING 003 HAER No. CA-2355-C (Page 4) a. Heating, air conditioning, ventilation: Heating/air condition ventilation consists of standard ventilation ducts within the drop ceiling with outlet vents located throughout the spaces. b.
Lighting: Industrial lighting is provided by suspended fluorescent lights. Part III. Operations and Process A. Operations: Building 003 consists of office spaces and was originally used as a security office restricting access to the facility. Part IV. Sources of Information A. Primary