BlockBefore

Rocketdyne Manufacturing Facility, Building 004, 6633 Canoga Avenue, Canoga Park

Rocketdyne Manufacturing Facility, Building 004, 6633 Canoga Avenue, Canoga Park, Los Angeles County, CA. Surveyed as HAER CA-2355-D, with a 899-word written history.

From the record

“Rocketdyne Manufacturing Facility, Building 004, 6633 Canoga Avenue, Canoga Park, Los Angeles County, CA”

Survey record header. Machine-read text.

Surveyed by the federal HAER program as HAER CA-2355-D · the record runs 899 words · one of 386 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Location

64 words

Source document Quoted word for word from HAER CA-2355-D. Not written, edited or summarised by this site.

The Rocketdyne Manufacturing Facility is located in Canoga Park, California. The facility is situated on an approximately 47- acre site (portion of Lot 2 Tract No. and portion of Lot 1 Tract No. bounded by Victory Boulevard on the south, Canoga Avenue on the east, and Owensmouth on the west. Building 004 is located at latitude: longitude: Present Owner/ Occupant: United Technologies Corporation (UTC)/vacant

Written history

568 words

Source document Quoted word for word from HAER CA-2355-D. Not written, edited or summarised by this site.

See Building 001 Record ROCKETDYNE MANUFACTURING FACILITY, BUILDING 004 HAER No. CA-2355-D (Page 2) Part I. Historical Information A. Physical History: 1. Date(s) of construction: 2. Architect/Engineer: Kenneth Neptune, architect; Richard Bradshaw, engineer 3. Builder, contractor, suppliers: Diversified Buildings, Inc. 4. Original plans and construction: See Supplemental Materials 5. Alterations and additions: Cryptographic Room Addition Mail Room Addition addition laboratory office and conference room modification earthquake safety earthquake restoration relocation of medical area B. Historical Context: See Building 001 Record Part II. Architectural and Structural/Design/Equipment Information A. General Statement: 1.

Character: Building 004 is located at the north end of the complex across an open parking lot from the facilities main factory building (Building Building 004 is a large single-story concrete structure with a convex roof. Designed as a utilitarian structure with mid-century modern characteristics, Building 004 distinguishing features include a large rectangular mass on the east elevation, clad in concrete with an embossed grid pattern, and multiple flat canopies supported by metal beams. 2. Condition of fabric: The exterior of Building 004 appears to be in good condition with no major indications of deterioration. However, Building 004 was vacated and closed resulting in a deteriorated condition of the interior. B. Description of Exterior: 1.

Overall dimensions: Building 004 is a rectangular building with overall dimensions of approximately 300 long by 150 wide. The building is approximately square feet. 2. Foundations: Building 004 sits on a reinforced concrete foundation. 3. Walls: The exterior walls consist of reinforced concrete. 4. Structural system, framing: Building 004 s structural system consists of a prefabricated steel frame attached to concrete walls and steel girders and beams. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 004 HAER No. CA-2355-D (Page 3) 5. Porches, stoops, balconies, bulkheads: The primary entrance consists of an elevated concrete porch located near the south end of the main elevation (east) and is accessed via a pair of concrete steps or a concrete ramp with metal railings.

There are two additional porches on the south fa ade of Building Near the east end of the south elevation is a long concrete porch beneath a flat roof canopy supported by metal posts. The porch is partially enclosed with a concrete block planter. Near the west end of the south elevation is a small concrete porch beneath a flat roof canopy supported by metal posts and partially enclosed with metal railings. 6. Openings: a. Doorways and doors: Building 004 s primary entrance is located on the east elevation, near the south end of the Building. The entry consists of a pair of fully glazed aluminum doors located beneath a fixed transom. Along the south elevation of Building there are two additional entrances.

Near the east end of the south elevation, a pair of fully glazed aluminum frame doors provides access to the building. Near the west end of the south elevation, there is a single, partially glazed, metal door. Finally, near the center of the west elevation there is a pair of fully glazed, aluminum frame doors , beneath a flat roof canopy supported by metal beams. b. Windows: Fenestration is limited to Building 004 s primary elevation (east) and includes large fixed floor-to-ceiling plate glass windows, one south of the primary entrance, and three north of the entryway. 7. Roof: a. Shape, covering: Building 004 has a low sloping convex roof with a tar and gravel surface. Part III. Sources of Information A. Primary

Sources

177 words

Source document Quoted word for word from HAER CA-2355-D. Not written, edited or summarised by this site.

See Building 001 Record B. Secondary See Building 001 Record C. Likely sources not yet investigated: See Building 001 Record ROCKETDYNE MANUFACTURING FACILITY, BUILDING 004 HAER No. CA-2355-D (Page 4) Part IV. Supplemental Material ROCKETDYNE MANUFACTURING FACILITY, BUILDING 004 HAER No. CA-2355-D (Page 5) Fig. 1. Propulsion Center Canoga Annex, Canoga Park California. Sheet A-1 Plot and Roof Plan. November 22, Kenneth H. Neptune, AIA Architect, Beverly Hills, California. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 004 HAER No. CA-2355-D (Page 6) Fig. 2. Propulsion Center Canoga Annex, Canoga Park California. Sheet A-3 Elevations and Sections. November 22, Kenneth H. Neptune, AIA Architect, Beverly Hills, California. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 004 HAER No.

CA-2355-D (Page 7) Fig. 3. Cryptographic Room & Milk Room Canoga Annex, Canoga Park California. Designer Fitzmorris. Plan, Elevation Sections & Details. February 18, Rocketdyne A Division of North American Aviation, Inc., Plant Engineering. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 004 HAER No. CA-2355-D (Page 8) Fig. 4. Rearrange Chrysler Office. Plan, Section, & Details. February 18, Designer Fitzmorris. Rocketdyne A Division of North American Aviation, Inc., Plant Engineering.

In context

Canoga Park, California The place record: every map, photograph and survey of this town.
Los Angeles County, California 1,078 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Canoga Park

15 records

The federal surveyors worked through Canoga Park building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
Pacific FurnaceHAER CA-22804,909 words
Rocketdyne Manufacturing FacilityHAER CA-2355-O1,369 words
Rocketdyne Manufacturing FacilityHAER CA-2355-B1,187 words
Rocketdyne Manufacturing FacilityHAER CA-2355-L1,060 words
Rocketdyne Manufacturing FacilityHAER CA-2355-C880 words
Rocketdyne Manufacturing FacilityHAER CA-2355-J722 words
Rocketdyne Manufacturing FacilityHAER CA-2355-I663 words
Rocketdyne Manufacturing FacilityHAER CA-2355-F655 words
Rocketdyne Manufacturing FacilityHAER CA-2355-N596 words
Rocketdyne Manufacturing FacilityHAER CA-2355-K570 words
Rocketdyne Manufacturing FacilityHAER CA-2355-P556 words
Rocketdyne Manufacturing FacilityHAER CA-2355-E541 words
Rocketdyne Manufacturing FacilityHAER CA-2355-G519 words
Rocketdyne Manufacturing FacilityHAER CA-2355-M498 words
Rocketdyne Manufacturing FacilityHAER CA-2355-H490 words

Provenance

  • Written history. Quoted verbatim from HAER CA-2355-D. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.