See Building 001 Record ROCKETDYNE MANUFACTURING FACILITY, BUILDING 016 HAER No. CA-2355-F (Page 2) Part I. Historical Information A. Physical History: 1. Date(s) of construction: 2. Architect/Engineer: None 3. Builder, contractor, suppliers: Unknown 4. Original plans and construction: None 5. Alterations and additions: None B. Historical Context: See Building 001 Record Part II. Architectural and Structural/Design/Equipment Information A. General Statement: 1. Character: Building 016 is located near the northwest end of the complex, next to the North Shed (Building Building 016 is a large single-story utilitarian prefabricated metal structure with a pitched roof.
Building 016 s distinguishing features include two large, full-length, metal canopies supported by metal posts and beams, one with a pitched roof located on the Building s west elevation and one with a shed roof on the south elevation. The interior is divided by steel-frame partitions with a concrete-slab floor. The ceiling is supported by metal trusses and contains exposed ducting, pipes, and sprinklers. Industrial lighting is provided by suspended fluorescent lights. Original storage shelves on tracks are still housed in the building. 2. Condition of fabric: Building 016 appears to be in good condition with no major indications of deterioration. B. Description of Exterior: 1.
Overall dimensions: Building 016 is a rectangular building with overall dimensions of approximately 75 long by 40 wide. The building is approximately square feet. 2. Foundations: Building 016 sits on a reinforced concrete foundation. 3. Walls: The exterior walls consist of prefabricated vertical metal sheathing. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 016 HAER No. CA-2355-F (Page 3) 4. Structural system, framing: Building 016 s structural system consists of a prefabricated steel frame attached to vertical metal sheathing and steel girders and beams. 5. Porches, stoops, balconies, bulkheads: None 6. Openings: a. Doorways and doors: Building 016 s primary entrance is located on the east elevation and consists of a single, metal frame door with partial glazing.
There are two additional entrances located on the south elevation. A doorway accessing an interior office space is located near the Building s southeast corner and consists of a single, metal, partially glazed door. A second entrance is located near the southwest corner, leading to the Building s large open interior space once used to store tools. The entry consists of a single metal door with no glazing. On the Building s north elevation, there is a large roll- up metal door providing vehicle access to the tool storage area. b. Windows: Fenestration is limited to Building 016 s east and south elevations. On the Building s east elevation, near the southeast corner, there is a single fixed, undivided plate glass window.
There are two identical windows on the Building s south elevation, flanking the door near the southeast corner of the structure. 7. Roof: a. Shape, covering: Building 016 has a low sloping pitched roof with a metal surface. Part III. Sources of Information A. Primary