See Building 001 Record ROCKETDYNE MANUFACTURING FACILITY, BUILDING 043 HAER No. CA-2355-O (Page 2) Part I. Historical Information A. Physical History: 1. Date(s) of construction: 2. Architect/Engineer: None 3. Builder, contractor, suppliers: Unknown 4. Original plans and construction: See Supplemental Material 5. Alterations and additions: Portico Addition Alteration; Demolished Rebuilt for Auditorium, Mission Control, and Exhibit Use for SSME Earthquake Safety Window Safety Boeing Product Display and Training Facility Raised Floor Area Upgrade B. Historical Context: See Building 001 Record Part II. Architectural and Structural/Design/Equipment Information A. General Statement: 1.
Character: The Building also known as the Leadership and Learning Center, was originally constructed to house the facilities cafeteria in The original designer s name is not listed on the plans. Building 043 s primary elevation is located on the east side of the building and features two large sliding doors beneath a modern double-height portico. The exterior appears to have been renovated in the recent past, adding new doors and altering the primary entrance from the original plans. The Building features an irregular convex roof line, highlighted by a modern cornice-like feature. The walls are clad in stucco and feature panels arranged in an uneven grid pattern. Aside from the fenestration on the east elevation, there are no windows.
The interior has been altered from its original use as a cafeteria to its new use as a Leadership and Learning Center. The interior space is dominated by a centrally located open space originally used as a dining room. Most recently, the open space housed exhibits displaying the products produced at the facility. Another interesting feature of the interior space is the Control Room known as the Rocketdyne Operations Support Center, which once featured banks of computer screens along its perimeter walls and a large centrally located trapezoidal conference table. Now vacant, the control room s screens have been removed and much of Building 043 is empty. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 043 HAER No. CA-2355-O (Page 3) 2.
Condition of fabric: Building 043 appears to be in good condition with no major indications of deterioration. B. Description of Exterior: 1. Overall dimensions: Building 043 is a rectangular building with overall dimensions of 100 long by 150 wide. The building is approximately square feet. 2. Foundations: Building 043 sits on concrete slab foundation. 3. Walls: The exterior walls of Building 043 are made of concrete blocks, arranged in a common bond pattern, clad with tan stucco and arranged in rectangular panels separated from white grout lines. 4. Structural system, framing: Building 043 s concrete block exterior walls support steel tapered beams and purlins in the roof structure. 5.
Porches, stoops, balconies, bulkheads: On Building 043 s east elevation is a large double-height portico supported by metal posts. The portico s roof consists of modern streel trusses and a corrugated metal roof surface. 6. Chimneys/stacks: There is a small metal ventilation shaft near the Building s south west corner 7. Openings: a. Doorways and doors: The main entrance is located on the east elevation and consists of metal framed, fully glazed, sliding double-doors. North of the oversized entrance is a smaller opening featuring a set of metal double-doors. Further north along the east elevation is a single metal door under a metal canopy. Also located on the east elevation near the southeast corner of the building is a single metal door, with partial glazing under a metal canopy.
On the south elevation there are two doorways. One doorway is located near the fa ade s midpoint tucked beneath a small metal canopy and features a single metal door with partial glazing. At the southwest corner of Building 043 s south elevation there is another single metal framed door with a louvered window. b. Windows and shutters: The only windows on Building 043 s exterior elevations are located on the east fa ade. The main entrance consists of two large sliding doors surrounded by an assembly of large, fixed window panes set in an aluminum frame. The windows are arranged in a similar fashion as the stucco paneling of the Building s exterior walls. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 043 HAER No. CA-2355-O (Page 4) 8. Roof: a.
Shape, truss type, covering: The roof of Building 043 is concave, reaching its lowest point slightly west of the south elevation s center. The roof is covered with asphalt type roofing material and features mechanical equipment as well as two large satellite dishes. Two yellow ladders and associated metal railings add to the roof s features. The irregular shape of Building 043 s roof is outlined by a wide dark brown cornice-like feature along its various elevations. C. Description of Interior: 1. Floor plans: The floor plan of Building 043 features a large open space located immediately adjacent to the primary entrance. This space was originally used as a dining room when the Building acted as a cafeteria. Most recently the large open space was used as a museum and auditorium.
To the north of the auditorium space is two large restrooms. At the northwest corner of the building is a large space used to house computer servers. South of the server room is the control center, also known as the Rocketdyne Operations Support Center. 2. Flooring: The auditorium space features carpet flooring while other spaces, such as the server rooms, have synthetic tiles. 3. Wall and ceiling finish: The walls throughout Building 043 consist of drywall over wood framing. The Ceiling is made up of acoustic tiles arranged in an aluminum framed structure. 4. Openings: a. Doorways and doors: Doors throughout Building 043 consist of single and double metal doors. 5. Mechanical equipment: a.
Heating, air conditioning, ventilation: Due to the cooling needs of the computer servers, ventilation was essential to the day-to-day operations occurring within Building Ventilation ducts are located above the drop- ceiling s acoustic tiles. Mechanical equipment used to power the heating and air-conditioning system was located on the roof. b. Lighting: Lighting in Building 043 consisted of recessed canned lighting and fluorescent fixtures. c. Plumbing: Two large restrooms are located on the northeast corner of the Building. ROCKETDYNE MANUFACTURING FACILITY, BUILDING 043 HAER No. CA-2355-O (Page 5) Part III. Sources of Information A. Primary