BlockBefore

Union Iron Works Turbine Machine Shop, 2200 Webster Street, Alameda

Union Iron Works Turbine Machine Shop, 2200 Webster Street, Alameda, Alameda County, CA. Surveyed as HAER CAL,1-ALAM,2-, with a 3,125-word written history.

From the record

“The Union Iron Works Turbine Machine Shop building is both historically and architecturally significant.”

Written record, HAER CAL,1-ALAM,2- survey. Machine-read text.

Surveyed by the federal HAER program as HAER CAL,1-ALAM,2- · the record runs 3125 words · one of 198 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Location

42 words

Source document Quoted word for word from HAER CAL,1-ALAM,2-. Not written, edited or summarised by this site.

Webster Street (approximately 500 feet east of Webster Street and feet south of the southernmost boundary of the U. S. Pierhead and Bulkhead line for the Oakland Inner Harbor [estuary]) City of Alameda, Alameda County, California Quad: Oakland West Date of Construction:

Significance

3003 words

Source document Quoted word for word from HAER CAL,1-ALAM,2-. Not written, edited or summarised by this site.

The Union Iron Works Turbine Machine Shop building is both historically and architecturally significant. As the nucleus of a major West Cost shipyard which made important contributions to ship building in both world wars, the large structure was first utilized (World War I) for production of reciprocating engines, diesel engines and marine turbines and, subsequently (during the Depression and World War II), for fabricating structural steel for a number of important buildings and structures on the West Coast and in parts of ship building.

The building, the only known major industrial design by the locally prominent architect, John Reid, is an impressive example of a large, open-plan industrial structure with vast interior spaces made possible by the use of steel trusses and steel frame construction and by curtain walls that lighted and ventilated the huge spaces. Its architectural quality is derived from its simplicity of structure, massing and detail; its curtain walls; and its straightforward response to its function Historians: Michael Corbett and Margaret Welden Charles Hall Page and Associates September Transmitted by: Jean P. Yearby, HAER, Union Iron Works Turbine Machine Shop HAER No.

CA-43 (Page 2) The Union Iron Works Turbine Machine Shop is a large rectangular industrial building, of steel frame construction with curtain walls of red brick and industrial sash. Measuring 552 feet by 164 feet and standing 85 feet high, the building is 23 bays long by 7 bays wide. It sites on a forest of concrete pile caps. Its roof is flat, except fora large monitor skylight crossed by 12 auxiliary skylights which run the length of the building. The main building is flanked by two buttress-like utility towers on both the north and south elevations. The dominant visual features of the buildings are the red color of its back piers and spandrels and the vast windows that occupy 90% of its wall area.

Both the narrow end walls and the long, buttressed, side walls of the building are articulated snd organized by a series of major and minor piers. The seven bays of the end walls are grouped by major piers in pairs of bays- This central pavilion projects above the rest of the building to hide the monitor roof. Major piers set off the end bays of the longer side walls. The piers of all elevations are crossed by two spandrel divisions that suggest a three-story interior space. In fact, the lower and more prominent spandrel corresponds to an interior mezzanine level along the aisles, but the narrow, higher spandrel merely reflects a major beam and does not correspond to a second upper level. The central pavilion reflects the major, central, unbroken space.

Ornamental brickwork on all main elevations is relegated to the lower spandrel panels, to the piers, and to the cornice. Spandrel panels are criss-crossed with raised brickwork, forming a diamond pattern; piers are treated with abstracted capitals; and the cornice is little more than a patterned frieze. The utility towers, which are the only part of the building with a predominance of brick over glass, have all of these elements plus herringbone patterned brick panels. Inside, unclad steel columns divide the area into three sections, a vast central area open from floor to floor, flanked by two aisles divided vertically by mezzanine floors.

The heavy but uncomplicated steel framing of the walls, aisles, and mezzanine floors gives way to a simple truss sytem that carries the flat roofs and to a more complicated system of light steel trusses that carry the monitor roof, with all its bays, over the unbroken central space. The combination of exposed steel framing, light trusses, vast areas of glass, and the bays of the monitor produce an animated and exciting interior space. The ground floor, once covered with creosoted redwood blocks, is a concrete slab surface. The mezzanine floor and roof areas were planed and surfaced. The utility towers housed elevators, stairs, and small rooms which originally functioned as offices, locker rooms, and quiet places somewhat apart from the noise of the shop itself.

Union Iron Works Turbine Machine Shop HAER No. CA-43 (Page 3) Although designed for the production of machine turbines, the layout of the building was sufficiently flexible to accommodate changing methods in their manufacture as well as in the manufacture of other heavy industrial products. The only permanent determinants of any manufacturing process in the building, apart from the building itself, were a giant crane spanning the central space above the mezzanine level that was designed to run the length of the building on tracks; railroad tracks that entered the east, west, and north side of the building; and cantilevered loading balconies at each bay of the mezzanine. The crane is still in place.

The railroad tracks, that were linked to the Southern Pacific lines at the western edge of the property and that were also used for transporting heavy materials around the plant, have been taken up. The building itself is unaltered except for the replacement of old steel doors for new ones at the ground level, and for the destruction by vandalism of large numbers of panes of glass. Most of the other buildings which contributed to the shipbuilding and industrial activities on the site were razed decades ago. Formerly the most prominent member of this industrial complex, the Union Iron Works Turbine Machine Shop has had its visual and functional relationships to such complex almost completely changed as a result.

The Union Iron Works Turbine Machine Shop is architecturally one of the most impressive examples in the San Francisco Bay Area of an early century industrial building. At the time of its construction, it was the largest of its kind on the Pacific Coast. It is the most prominent example of industrial architecture by the important San Francisco architect, John Reid, a man who is best known for his contributions to the San Francisco Civic Center and as a designer of San Francisco school buildings. The building was also important as the nucleus of a shipyard that played nationally recognized roles in shipbuilding in both World Wars, and that was important in the industrial development of the Alameda estuary and the city of Alameda.

It was the largest and most prominent building in the shipyard. The turbine machine shop is an excellent example of a type of industrial building found in major industrial centers throughout the United States in the early century, including buildings for Bethlehem Steel at Sparrow's Point, Maryland, and Elizabeth, New Jersey. The type is characterized by vast interior spaces made possible by the use of steel trusses and steel frame construction, and by curtain walls of industrial sash that light and ventilate the huge spaces. These buildings are open in plan and thus sufficiently flexible to accommodate changing industrial processes. Such big American industrial structures were major influences on early modern architects in the United States and Europe.

Due to its size and its prominent location near the Alameda estuary, the turbine machine shop is widely known today and still admired for the same qualities that appealed to early modernists: its simplicity of structure, massing, and detail; its straightforward response to its function; and its vast curtain walls of industrial sash. Although there Union Iron Works Turbine Machine Shop HAER No. CA-43 (Page 4) are other buildings of a similar type and age in the Bay Area, few were as handsome as this. The architect, John Reid, was one of the leading architects in San Francisco in the and He studied at the Ecole des Beaux Arts in Pris from to and received his diploma in He was one of three architectural advisors in the planning and building of the San Francisco Civic Center.

Later, he became San Francisco City Architect and built a great many schools in that capacity. Most of his work was in San Francisco. Although it is the only known industrial structure designed by him, the turbine machine building reflects the orderly design of all his work, suitable in its plan and appearance to its function. Mr. Reid was assisted in the design by the firm of Hall and Snyder, Engineers, and the structural plans were prepared under the supervision of Mr. C. H. Snyder of that firm. The history of the turbine machine shop is inseparable from that of the shipyard around it. The shipyard was located on land which had long been known as the Alameda Marsh.

By about Alaska sailing vessels moored there during the winter and, before Dickie Brothers of San Francisco built a slip for the construction of small wooden ships. In the United Engineering Company of San Francisco bought the property, improved it and, by built up an extensive business in repairing and drydocking steam schooners and other ships. This was the first important industry on the Alameda side of the estuary and one of the first at the western end of Alameda, areas that during the World War I would become central to the industrial economy of the whole East Bay. In the yard was bought by Union Iron Works, a manufacturer of mining machinery, locomotives, and ships, which already operated the Potrero Works, Risdon Works, and Hunters Point Works in San Francisco.

The Alameda Yard was known as the Alameda Works of Union Iron Works. In Union Iron Works had been bought by the Bethlehem Steel Corporation. In in response to the World War, Bethlehem Steel set up the Bethlehem Shipbuilding Corporation, a consolidation of several shipyards throughout the United States. The three works of Union Iron Works became known as the Union Plant of the Bethlehem Shipbuilding Corporation.

A major expansion of the shipbuilding facilities of the Alameda Works took place at that time, including construction of six ways for the assembling of ships up to 550 feet long; the 500-foot plate shop; the marine building for warehousing and the construction of small parts; the power house; an employee cafeteria; several office buildings; an employee hospital, and the turbine machine shop for the production of reciprocating engines, diesel engines, and marine turbines. The complex was entered through a formal entrance gate at Tynan Avenue.

Altogether, the Alameda Works "spread over seventy acres and was considered one of the largest and best equipped yards in the country."^ The turbine machine shop itself was referred to as "the finest machine shop on the Pacific Coast."2 Union Iron Works Turbine Machine Shop HAER No.CA-43 (Page 5) During World War I, several accomplishments of the yard attracted widespread public acclaim and official acknowledgement.

In the company newsletter stated, "Figured on a basis of tons per slip per man, the Alameda plant leads all other plans in the United States for the year This record included construction of the two largest ships ever built on the Pacific Cost up to that time, the launching of the ton freighter "Invincible" after only 24 working days, and the launching of four ton freighters on July 4, The latter event was one of the important rallying points of the war years for Alameda citizens: "The Bethlehem yards were gay with flags and streamers for the quadruple launching, and thousands of spectators crowded every available vantage point to witness the spectacle."^ These speed records were due in large part to the assembly and riveting on the ground of major sections of ships, which were then hoisted into place.

All in all, between and a total of 58 ships were built. After the Alameda Works ceased making ships but continued its drydocking and ship repairing operations. In the turbine machine shop was renamed the Alameda Fabricating Works and was revamped "for the sole function of fabricating structural steel."^ It maintained this function through World War II years, producing steel for the Alameda County Court House, the San Francisco Mint, and many Army and Navy buildings on the Pacific Coast, among others. It also continued to produce parts for the revitalized shipyard at the Alameda Works during World War II.

At the beginning of World War II, the Alameda Works was reestablished as the Bethlehem Alameda Shipyard, Inc., which was sold to the United States Maritime Commission and leased back to Bethlehem. The yard was modernized and expanded. Among the most prominent of the new structures were a five-story reinforced concrete warehouse; new ways; and new housing that was built south of the yard. During the war, the yard repaired over vessels, and it produced p 2 troop transport ships, "the largest non-combatant vessel to be built by any American shipyard since Pearl Harbor." A contract for 10 of these 23,000-ton ships called for them to be convertible to luxury liners after the war.

After World War II, ownership of the Alameda Works reverted back to the Bethlehem Steel Corporation, although there remained some confusion in the title for many years. Shipbuilding came to an end and, by the early the old Alameda yard was used principally to maintain and repair equipment used by other Bay Area facilities of Bethlehem Steel. Following its closure by and the demolition of many of its buildings, the old Alameda Works was owned by a series of different companies, none of whom used the works to its capacity. Most buildings on the property were torn down, but the turbine machine shop was not significantly altered. During these years, it was used to sell heavy machinery and for a marine salvage business. Since 19 72, the building has been vacant.

Union Works Turbine Machine Shop HAER No. CA-43 (Page 6) The building was proposed for retention in a Master Plan approved by the city of Alameda in The owners of the building subsequently performed lengthy and detailed analyses of the structural characteristics and code requirements for the building. In its owners developed an economically-feasible program for adaptive reuse of the building, consistent with the prior approval: a mixed-use facility with shopping, parking, recreation, and multiple-dwelling residential use was proposed. Such residential use was, however, precluded by provisions of a amendment to the City Charter of Alameda. A citizens committee, Alamedans to Save the Red Brick Building, was formed in January to retain the building.

The committee qualified a ballot measure to exempt the structure from the restrictions on residential use, but the ballot measure was defeated by a majority of the voters in June No other economic rehabilitation of the structure has been presented to or by its owners, and retention is not possible or appropriate under such circumstances. FOOTNOTES 1 Merritt, Frank Clinton, History of Alameda County, California. Chicago and S. J. Clarke Publishing Company, Vol. I, page 2 Bethlehem Shipbuilding Corporation, p. 3 "Records Within Records" Make for Speed at Alameda Plant, Bethlehem Star, Vols. 1 and 5, April 4 Merritt, p.

5 Bethlehem Pacific Coast Steel Corporation, Bethlehem Pacific Steel Facilities, 6 Western Shipbuilders in World War II: A Detailed Review of Wartime Activities of Leading Maritime and Navy Contractors. Oakland Shipbuilding Review Publishing Association, Union Iron Works Turbine Machine Shop HAER No. CA-43 (Page 7) BIBLIOGRAPHY 1. Alameda County Building Permits 2. Bethlehem Pacific Coast Steel Corporation. Bethlehem Pacific Steel Facilities. 3. Bethlehem Shipbuilding Corporation, (Union Plant), "Union Plant History Shows Marvelous Development," (June 3. 4. Bethlehem Shipbuilding Corporation, 5. Christy, Robert E. The United Engineering Works and the United Engineering Company: A Brief History of Two Alameda Shipyards. 6. Hansen, P. R. The History of Bethlehem Steel Alameda Shipyards. 7.

Merritt, Frank Clinton. History of Alameda County, California. Chicago and S. J. Clarke Publishing Company, Vol. I. 8. Morrow, Irving F., "Work by John Reid, A.I.A.," The Architect and Engineer, (February 9. "Records Within Records" Make for Speed at Alameda Plant, Bethlehem Star, Vols. 1 and 5, April 10. Rudd Gast & Associates, Inc. Bethlehem Steel Shop Building. 11. Schwab, Charles M. "Pacific Coast Shipbuilders Lead the Nation," Architect and Engineer LIV:1 (July 12. Western Shipbuilders in World War II: A Detailed Review of Wartime Activities of Leading Maritime & Navy Contractors. Oakland Shipbuilding Review Publishing Association. 13. "With the Architects," The Architect and Engineer. XLVI:1 (July 134 nd LI:1 (October UNION IRON WORKS HAER No.

CA -43 Page 8 rrt 4 n It or** ^ v BOSK A ^ I- ?* *< I |ft a i o 6 a i f t o I t * i - J. - - 4.- if .. .*. > Q UNION IRON WORKS HAER No. CA-43 Page 9 MUJ ' -. " .r^ - w** ~ J s* T J UNION IRON WORKS HAER No. CA-43 Page 10 UNION IRON WORKS HAER No. CA-43 Page 11 nnm !feu .w? U Is 3** SITSp 33 8? * > wmuv H * X ^9 ft IP 4! ft ;% t^fey; I r- su - ' 8 *# III 1 Hi Iff* w filV 2 ^5 HI 2 si 9 a isl ff ^*p ' 1 UNION IRON WORKS HAER No. CA-43 Page 12 UNION IRON WORKS HAER No. CA-43 Page 13 UNION IRON WORKS HAER No. CA-43 Page 14 f> z : - ; < -' % '-; & UNION IRON WORKS HAER No, CA-43 Page 15 UNION IRON WORKS HAER No0 CA-43 Page 16 *J- ir* UNION IRON WORKS HAER No. CA-43 Page 17 UNION IRON WORKS HAER No. CA-43 Page 18 ^r $* & UNION IRON WORKS HAER No.

CA-43 Page 19 .-Avfefiw UNION IRON WORKS JAER No. CA-43 Page 20 3 5 si -i&k -o ^ zi B-l T* I! <u N A ;* i U i= ^ , 4 o 3= Zi * IT lit L * i FSF T?y o - o UNION IRON WORKS HAER No. CA-43 Page 21 UNION IRON WORKS HAER NoQ CA-43 Page 22 UNION IRON WORKS HAER No. CA-43 (Page 23^ 37 lr 'i"*""' @:is,;w& It UNION IRON WORKS HAER NOo CA-43 Page 24 L1 4 A UNION IRON WORKS HAER No0 CA-43 Paee 25 fyl UNION IRON WORKS HAER No. CA-43 Page 26 UNION IRON WORKS HAER No0 CA-43 Page 27 UNION IRON WORKS HAER No. CA-43 Page 28 UNION IRON WORKS HAER No. CA-43 Page 29

In context

Alameda, California The place record: every map, photograph and survey of this town.
Alameda County, California 231 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Alameda

24 records

The federal surveyors worked through Alameda building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
United Engineering Company ShipyardHAER CAL,1-ALAM,4-22,920 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4A-8,911 words
Alameda City HallHABS CAL,1-ALAM,1-6,900 words
GTS Admiral William M. CallaghanHAER CA-23316,040 words
SS Keystone StateHAER CA-23345,179 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4D-4,308 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4B-4,177 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4F-2,995 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4I-2,885 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4H-2,675 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4J-2,173 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4G-2,035 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4C-1,836 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4Q-1,656 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4M-1,600 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4K-1,451 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4L-1,432 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4R-1,326 words
U.S. Coast Guard Support Center AlamedaHABS CAL,1-ALAM,3-1,278 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4P-1,257 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4O-1,121 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4E-1,072 words
Henry H. Meyers GardenHALS CA-48831 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4N-49 words

Provenance

  • Written history. Quoted verbatim from HAER CAL,1-ALAM,2-. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.