BlockBefore

United Engineering Company Shipyard, Boiler Maker's House, 2900 Main Street, Alameda

United Engineering Company Shipyard, Boiler Maker's House, 2900 Main Street, Alameda, Alameda County, CA. Surveyed as HAER CAL,1-ALAM,4O-, with a 1,121-word written history.

From the record

“The boiler maker's house is a contributing structure in the United Engineering Corrfpany Shipyard historic district that has been determined eligible for the National Register of Historic Places.”

Written record, HAER CAL,1-ALAM,4O- survey. Machine-read text.

Surveyed by the federal HAER program as HAER CAL,1-ALAM,4O- · the record runs 1121 words · one of 198 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Significance

560 words

Source document Quoted word for word from HAER CAL,1-ALAM,4O-. Not written, edited or summarised by this site.

The boiler maker's house is a contributing structure in the United Engineering Corrfpany Shipyard historic district that has been determined eligible for the National Register of Historic Places. The United Engineering Company Shipyard, established in to build and repair ships for the U.S. Navy, is the last surviving of several large World War II shipyards in Alameda. United Engineering built 21 tugboats and repaired hundreds of ships during the war. The facility was one of the largest employers in Alameda and played an important economic and social role in the city. This building housed one of the basic industrial functions of the shipyard.

Description: The boiler maker's house is located north of the large Inspection and Repair Shops building at the base of the wharf in the Alameda Gateway complex. The boiler maker's house is a one-story rectangular-shaped building oriented east-west, It measures 33 feet 3 inches across the north and south sides and 25 feet 2 inches across the east and west ends. The structure has a total area of 825 square feet. Like many of the buildings constructed at the yards from to the boiler maker's house is utilitarian in appearance and has little ornamentation. The boiler maker's house rests on a foundation of wood posts. The building consists of a stud frame structural system covered with board and batten wood siding on the exterior.

The siding is painted gray, the trim is burgundy and the sash is white. The roof is gabled with a low pitch, and a "Bay Ship and Yacht Company" sign sits on top. Because of the roofs low pitch, its covering is not visible. The doors and windows all appear to be original. The windows are double-hung, six-over-six, divided-light windows with wooden sashes. The opening on the south side has a half-glassed door, and the main entrance on the east end has sliding wooden doors. UNITED ENGINEERING COMPANY SHIPYARD, BOILER MAKER'S HOUSE (Building No. 25) HAER No. CA-295-O (Page 2) The interior of the building is composed of one large room with a small bathroom in the southwest corner. The bathroom is only accessible from the exterior door on the south side.

The ceiling is open leaving the wood trusses visible. The walls are covered with painted plywood, and the floor is carpeted. In the large room there are hanging fluorescent lights and a drinking fountain; they appear to be later additions. The bathroom is fully plumbed. The building has been moved from its original location southeast of the south end of Pier 3 but otherwise appears to have been little altered and to be in good condition. Historical Context: United Engineering built the boiler maker's house during a construction campaign in the early At that time the company quickly built numerous buildings to accommodate shipbuilding and repair necessitated by U.S. involvement in World War II.

The boiler maker's house first appeared on a site plan of the shipyard dated 22 October At that time it was located near the south end of Pier No. 3 and was identified as a boiler shed. On a June site plan, it was identified as a boiler house. On a site plan it was labeled as building no. 37. Some time after it was moved to its present location. In the building is used as a break room for the Bay Ship and Yacht Company employees.

Sources

167 words

Source document Quoted word for word from HAER CAL,1-ALAM,4O-. Not written, edited or summarised by this site.

Alameda County Recorder. Exhibit B: Description of Buildings, Waterfront Improvements, Shipyard Utilities, Machinery and Equipment. 18 February RE: IM Alameda County Recorder. Grant Deed. Matson Navigation Company to Todd Shipyards Corporation 6 March including List of Buildings, Fixtures, and Improvements. Kennedy, Clyde C, Engineering Office of "Area Plan and Interceptor Profile: Improvements to Sewer System for Properties Occupied by Todd Shipyards Corp., Alameda, Calif." Prepared for Matson - United Properties, Inc. 9 August United Engineering Company Alameda Shipyard San Francisco Area, Sketch No. 48. 10 February United Engineering Company Alameda Shipyard: Map Showing Existing Facilities and Those Under Construction.

22 October UNITED ENGINEERING COMPANY SHIPYARD, BOILER MAKER'S HOUSE (Building No. 25) HAER No. CA-295-O (Page 3) United Engineering Company Map ofAlameda Shipyard Showing Existing and Proposed Additional Facilities. Plan no. UEC- A-l-7. 14 June United Engineering Company Memo to Chief of the Bureau of Yards and Docks. "Reproduction Costs and Market Value to Third Parties of 'Civil Works'", with Estimated Schedule of "Civil Works" Facilities. 8 February

Written history

311 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CAL,1-ALAM,4O-. Not written, edited or summarised by this site.

This report was prepared for the U.S. Army Corps of Engineers and the Port of Oakland in accordance with a Memorandum of Agreement (MOA) between the U.S. Army Corps of Engineers, San Francisco District and the California State Historic Preservation Officer concerning the former United Engineering Company shipyard. The Port of Oakland and the City ofAlameda were concurring parties to the MOA. The MOA was created because of a proposal by the U.S. Army Corp of Engineers in partnership with the Port of Oakland to sponsor the Oakland Harbor Navigation Improvements Project. This project "would deepen Oakland Harbor channels and berth areas from -42 feet mean lower low water to -50 feet with 2 feet overdredge allowance" and widen some portions of the channels.

These actions, which would constitute an Undertaking under Section would result in the demolition of several buildings and structures at the former United Engineering Company Shipyard. Because the shipyard had been determined eligible for the National Register of Historic Places, the Undertaking would have an adverse effect on the property. Under the MOA, the following HAER documentation has been prepared: a written historic and descriptive report on the shipyard as a whole, seventeen separate reports on individual buildings and structures in the shipyard, including this report, and photographic documentation. This building will not be demolished by the federal undertaking. This report was prepared by Jody Stock, architectural designer, and Michael R. Corbett, architectural historian.

Corbett was a subcontractor to Basin Research Associates of San Leandro. Basin Research was under contract to g. borchard & associates. UNITED ENGINEERING COMPANY SHIPYARD, BOILERMAKER'S HOUSE (Building No. 25) HAER No. CA-295-O (Page 4) u 3 T Bay Ship & Yacht Company Break Room J Women's Rest room BUILDING NO, 25:

Boilermaker's House North

Measured by Stephen Hardy and Jody Stock Drawing prepared by Jody R. Stock 0 2 4 12 feet

In context

Alameda, California The place record: every map, photograph and survey of this town.
Alameda County, California 231 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Alameda

24 records

The federal surveyors worked through Alameda building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
United Engineering Company ShipyardHAER CAL,1-ALAM,4-22,920 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4A-8,911 words
Alameda City HallHABS CAL,1-ALAM,1-6,900 words
GTS Admiral William M. CallaghanHAER CA-23316,040 words
SS Keystone StateHAER CA-23345,179 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4D-4,308 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4B-4,177 words
Union Iron Works Turbine Machine ShopHAER CAL,1-ALAM,2-3,125 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4F-2,995 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4I-2,885 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4H-2,675 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4J-2,173 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4G-2,035 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4C-1,836 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4Q-1,656 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4M-1,600 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4K-1,451 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4L-1,432 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4R-1,326 words
U.S. Coast Guard Support Center AlamedaHABS CAL,1-ALAM,3-1,278 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4P-1,257 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4E-1,072 words
Henry H. Meyers GardenHALS CA-48831 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4N-49 words

Provenance

  • Written history. Quoted verbatim from HAER CAL,1-ALAM,4O-. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.