BlockBefore

United Engineering Company Shipyard, Bending Shop & Oven, 2900 Main Street, Alameda (HAER CAL,1-ALAM,4K-)

United Engineering Company Shipyard, Bending Shop & Oven, 2900 Main Street, Alameda, Alameda County, CA. Surveyed as HAER CAL,1-ALAM,4K-, with a 1,451-word written history.

From the record

“The bending shop and oven (building no. 19) is a contributing structure in the United Engineering Company Shipyard historic district that has been determined eligible for the National Register of Historic Places.”

Written record, HAER CAL,1-ALAM,4K- survey. Machine-read text.

Surveyed by the federal HAER program as HAER CAL,1-ALAM,4K- · the record runs 1451 words · one of 198 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Significance

712 words

Source document Quoted word for word from HAER CAL,1-ALAM,4K-. Not written, edited or summarised by this site.

The bending shop and oven (building no. 19) is a contributing structure in the United Engineering Company Shipyard historic district that has been determined eligible for the National Register of Historic Places. The United Engineering Company Shipyard, established in to build and repair ships for the U.S. Navy, is the last surviving of several large World War II shipyards in Alameda. United Engineering built 21 tugboats and repaired hundreds of ships during the war. The facility was one of the largest employers in Alameda and played an important economic and social role in the city. As part of a complex with building no. 20 and a demolished furnace between the two buildings, this building played a basic industrial function in the shipyard.

Description: The bending shop and oven is located to the west of the engineering building and north of the large Inspection and Repair Shops building in the Alameda Gateway complex. The bending shop and oven is nearly identical to a second bending shop (Building which is located to the south. The building is a one-story rectangular-shaped structure with two lean-tos on the south facade. The shop measures 48 feet across the east and west sides and 34 feet across the north and south ends. The building has a total area of approximately square feet. Like many of the buildings constructed at the yards from the bending shop is utilitarian in appearance and has no ornamentation. This is a timber frame, post-and-beam structure.

The frame rests on a foundation of wood beams, and its vertical posts sit on 2lA foot by 2lA foot concrete bases. The roof is supported by a distinctive truss designed to accommodate a central craneway. The bottom chord of the truss is not continuous at the center so that its sides are at the height of the walls and its center is stepped up higher. At the same time, longitudinal beams that appear to have supported crane rails are supported at the bases of the queen posts. The main roof is gabled UNITED ENGINEERING COMPANY SHIPYARD, BENDING SHOP AND OVEN (Building No. 19) HAER No. CA-295-K (Page 2) with a full-length lean-to on the east side and two smaller lean-tos on the south end. There are several vents on the roof.

The exterior walls, main roof, and lean-to roofs are all covered with corrugated, galvanized iron siding. The large opening on the west side has a pair of doors that are framed with wood and covered with corrugated iron. Between the lean-tos on the south end there are the remains of a brick furnace. The interior of the shop is a large open space. The walls and ceiling are unfinished with exposed structural members. Aside from several small windows in the lean-tos, the building does not have any windows and is lit with what appear to be the original hanging incandescent lights. In addition, the north end is open providing access and additional light. Original plans show the floor was a concrete slab with a leveling plate on top.

The plate has been removed and the slab has either been removed or covered with dirt. The openings of the building have been covered with canvas. Aside from the removal of the crane and overhead rail, the bending shop appears little altered. Historical Context: The two bending shops, building no. 19 and no. 20, were built in during a construction campaign by United Engineering. The company quickly built numerous buildings to accommodate shipbuilding and repair necessitated by U.S. involvement in World War II. The buildings first appeared on a plan of 22 October as a related complex identified as "angle-slab, furnace, and punch". Between the two buildings was a furnace and southeast of the south building was a punch.

A June site plan identified the two buildings as "bending slabs", a term that remained in use at least as late as When Matson Navigation sold the property to Todd Shipyard Corporation in the complex of bending slabs and furnace was labeled no. 12. The Sanbom map identified the buildings as flange shops and labeled no. 11. By the time the Todd Shipyards Corporation sold the property to Alameda Gateway in the complex of buildings and furnace was labeled no. 72. The bending shop is currently used for storage.

Sources

287 words

Source document Quoted word for word from HAER CAL,1-ALAM,4K-. Not written, edited or summarised by this site.

Alameda County Recorder. Exhibit B: Description of Buildings, Waterfront Improvements, Shipyard Utilities, Machinery and Equipment. 18 February RE: IM C UNITED ENGINEERING COMPANY SHIPYARD, BENDING SHOP AND OVEN (Building No. 19) HAER No. CA-295-K (Page 3) Alameda County Recorder. Grant Deed. Matson Navigation Company to Todd Shipyards Corporation 6 March including List of Buildings, Fixtures, and Improvements. Alameda Gateway. Existing Site Plan. 30 January Froberg, Alben, Architect. Bending Shop and Oven. Alameda, CA: United Engineering Co., Alameda Shipyard, Ship Repair Facilities, 15 December Kennedy, Clyde C, Engineering Office of.

"Area Plan and Interceptor Profile: Improvements to Sewer System for Properties Occupied by Todd Shipyards Corp., Alameda, Calif." Prepared for Matson - United Properties, Inc. 9 August Sanborn Map Company. Insurance Maps of Alameda, California, p. 93. New York: Thompson, Richard G.s Lieutenant Colonel, San Francisco District, Corps of Engineers. Letter to Cherilyn Widell, State Historic Preservation Officer, requesting Determination of Eligibility. 30 April United Engineering Company Alameda Shipyard, San Francisco Area, Sketch No. 48. 10 February United Engineering Company Alameda Shipyard: Map Showing Existing Facilities and Those Under Construction. 22 October United Engineering Company Map of Alameda Shipyard Showing Existing and Proposed Additional Facilities. Plan no. UEC- A-l-7.

14 June United States. Army Corps of Engineers - San Francisco District and California. State Historic Preservation Officer. Memorandum of Agreement Regarding the Oakland Harbor Navigation Improvements Project, Alameda County, California. Signed 31 January and 22 January Widell, Cherilyn, State Historic Preservation Officer. Letter to Richard G. Thompson, Lieutenant Colonel, San Francisco District, Corps of Engineers, Regarding Oakland Harbor Ship Channel Deepening and Improvements, Alameda County [Determination of Eligibility Concurrence]. 9 June r UNITED ENGINEERING COMPANY SHIPYARD, BENDING SHOP AND OVEN (Building No. 19) HAER No. CA-295-K (Page 4)

Written history

358 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CAL,1-ALAM,4K-. Not written, edited or summarised by this site.

This report was prepared for the U.S. Army Corps of Engineers and the Port of Oakland in accordance with a Memorandum of Agreement (MOA) between the U.S. Army Corps of Engineers, San Francisco District and the California State Historic Preservation Officer concerning the former United Engineering Company shipyard. The Port of Oakland and the City of Alameda were concurring parties to the MOA. The MOA was created because of a proposal by the U.S. Army Corp of Engineers in partnership with the Port of Oakland to sponsor the Oakland Harbor Navigation Improvements Project. This project "would deepen Oakland Harbor channels and berth areas from -42 feet mean lower low water to -50 feet with 2 feet overdredge allowance" and widen some portions of the channels.

These actions, which would constitute an Undertaking under Section would result in the demolition of several buildings and structures at the former United Engineering Company Shipyard. Because the shipyard had been determined eligible for the National Register of Historic Places, the Undertaking would have an adverse effect on the property. Under the MOA, the following HAER documentation has been prepared: a written historic and descriptive report on the shipyard as a whole, seventeen separate reports on individual buildings and structures in the shipyard, including this report, and photographic documentation. This building will not be demolished by the federal undertaking. This report was prepared by Jody Stock, architectural designer, and Michael R. Corbett, architectural historian.

Corbett was a subcontractor to Basin Research Associates of San Leandro. Basin Research was under contract to g. borchard & associates. r UNITED ENGINEERING COMPANY SHIPYARD, BENDING SHOP AND OVEN (Building No. 19) HAER No. CA-295-K (Page 5) BUILDING NO. 19:

Bending Shop and Oven North

Prepared by Jody R. Stock 0 2 4 *Pian is based on scaled drawing, Alben Fro berg. Architect, Bending Shop and Oven (Alameda, CA: United Engineering Co., Alameda Shipyard, Ship Repair Facilities, 15 December The plan has been altered to reflect current field conditions. When constructed, the building was open to the exterior. The walls (which have been added after the ! 941 plan) are indicated with hashmarks and are not lo scale.

In context

Alameda, California The place record: every map, photograph and survey of this town.
Alameda County, California 231 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Alameda

24 records

The federal surveyors worked through Alameda building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
United Engineering Company ShipyardHAER CAL,1-ALAM,4-22,920 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4A-8,911 words
Alameda City HallHABS CAL,1-ALAM,1-6,900 words
GTS Admiral William M. CallaghanHAER CA-23316,040 words
SS Keystone StateHAER CA-23345,179 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4D-4,308 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4B-4,177 words
Union Iron Works Turbine Machine ShopHAER CAL,1-ALAM,2-3,125 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4F-2,995 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4I-2,885 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4H-2,675 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4J-2,173 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4G-2,035 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4C-1,836 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4Q-1,656 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4M-1,600 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4L-1,432 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4R-1,326 words
U.S. Coast Guard Support Center AlamedaHABS CAL,1-ALAM,3-1,278 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4P-1,257 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4O-1,121 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4E-1,072 words
Henry H. Meyers GardenHALS CA-48831 words
United Engineering Company ShipyardHAER CAL,1-ALAM,4N-49 words

Provenance

  • Written history. Quoted verbatim from HAER CAL,1-ALAM,4K-. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.