This project is part of the Historic American Engineering Record (HAER), a long-range program to document historically significant engineering and industrial works in the United States. The Heritage Documentation Programs of the National Park Service, U.S. Department of the Interior, administers the HAER program. The project was prepared under the direction of Todd Croteau (HAER Maritime Program Coordinator) for the Maritime Administration in Wesley Hale wrote the historical report under the supervision of Justine Christianson, HAER Historian. Jarob Ortiz produced the large-format photographs. Drawings were prepared by Onairis N. P rez and Cristina I. Montenegro-Torres in SS KEYSTONE STATE HAER No. CA-2334 Page 3 Part I. Historical Information A. Physical History 1.
Date of Construction: The ship was originally a combination breakbulk container ship built for the American President Lines (APL) by National Steel and Shipbuilding Company in 2. Designer/Naval Architect: National Steel and Shipbuilding Company (NASSCO) designed and built the SS President Harrison and its sister vessels SS President Polk and SS President Monroe for American President Lines of San Diego, California. The original design was based on the Maritime Administration (MARAD) Master Mariner C4-S-1qa class. 3.
Original Plans and Construction: The Maritime Administration (MARAD) C4-S-1qa class consisted of a breakbulk cargo vessel developed in the This cargo vessel had an overall length of and contained seven holds accessed by five pairs of kingpost- and-boom-type cargo gear distributed forward and aft of the superstructure. The third American President Lines vessel to bear the name President Harrison, it could host twelve passengers in eight staterooms and a crew of forty-five plus two cadets. The holds were numbered one to seven, forward to aft. Hold 1 was divided into four compartments across two decks, with a third deck dedicated to liquid cargo.
The main deck had lockers for special cargo on the port and starboard sides with access through hatch 1 on the foc s le deck measuring x There were two 10-ton cranes on the forward-most kingpost. The third deck area of hold 1 was reserved for liquid cargo such as oil or salt-water ballast. Hold 2 had a similar layout to hold 1 but without space for liquid cargo. Instead, hold 2 could carry cargo on four decks with initial access through the foc s le deck hatch 2, which measured 30' x Cargo was lowered into the hold by two 10-ton capacity cranes located on the forward kingpost and two 22-1/2-ton cranes on the second kingpost from forward. The foc s le deck ended after the first two holds, and two deck lockers were positioned on the main deck between holds 2 and 3.
Hold 3 was designed for general cargo to be stored on four decks. Five cranes loaded cargo through hatch 3 on the main deck, which had a clear opening measuring x There were two 22-1/2-ton cranes on the second kingpost from forward and two 10- ton cranes on the port and starboard sides of the midships kingpost. The fifth crane was a 60-ton capacity boom on the center line of the same kingpost. The winch room that supported the third kingpost from forward was located between holds 3 and 4 and supported five cranes three for loading hold 3 and two 22-1/2-ton cranes for loading hold 4.
Hold 4 received cargo through a hatch opening on the main deck measuring x There were four cranes servicing the hold: two 22-1/2-ton ones operating from a kingpost and two 10-ton ones operating from the superstructure. The cargo area on the second SS KEYSTONE STATE HAER No. CA-2334 Page 4 deck had two compartments for refrigerated cargo on the port and starboard sides for a total of four compartments and room for dry cargo on the centerline of the hold. The third deck and tank top had open spaces for dry cargo. Hold 5 was located just aft of the superstructure and was serviced by four cranes: two 22- 1 /2-ton ones that operated from a kingpost just aft of the superstructure, and two 10-ton cranes that operated from the aft end of the structure.
The hatch measured x The holds on the second and third decks had identical layouts to hold 4, with four compartments for refrigerated cargo distributed port and starboard and room for dry cargo along the centerline. The area below hold 4 on the tank top contained four deep tanks located port and starboard with the propeller shaft alley running between them. Hold 6 only housed containers for cargo from the main deck to the third deck with the tank top designed to hold deep tanks for fuel oil or salt-water ballast. It was serviced by four cranes: two ton cranes from the kingpost just aft of the superstructure and two 10-ton cranes from the aftermost kingposts.
The cargo was lowered to the third deck through a hatch opening measuring x The second and third deck holds were designed to carry dry cargo. Hold 7 was the aftermost hold and was accessed through a main deck hatch measuring 25' x 25' using two 10-ton cranes operated at the aftermost kingpost. Like hold 6, hold 7 primarily held dry cargo on the second and third decks. The tank top below the hold contained deep tank 7 port and starboard for fuel oil or salt-water ballast, and the shaft alley narrowed with the aft end of the hull. The stern of the ship housed lockers for special cargo and the bosun s stores on the main deck.
The second deck had space on the port and starboard for the stern capstan machinery, with the steering gear room between them, plus the carpenter s shop port and the engineering department stores starboard. The third deck held the hawser room. The ship s superstructure was located slightly astern amidships and had five decks for passengers and crew, with the galley and food stores on the second deck. The elevation of the top of the house was and featured the compass and exhaust funnel. The bridge deck was situated above the keel and contained the wheelhouse across the forward section, chart room, radar and gyro room on the starboard side, and the master s stateroom and office on the port side.
Below the bridge deck, elevated 70' above the keel, was the boat deck, which contained the work and sleep space for the radio officer on the port side, the third mate and cadet rooms on the starboard side, and a quiet lounge area between them. The crew and lounge areas wrapped around the machinery casings, and two 75-person lifeboats were stowed on the port and starboard sides. The cabin deck was directly below the boat deck at elevation and contained eight staterooms for twelve passengers. Four of the staterooms housed two passengers while the remaining four were single occupancy. The aft portion of the cabin deck contained SS KEYSTONE STATE HAER No. CA-2334 Page 5 the dining room, card room, and main lounge for the officers and passengers.
Like all decks in the superstructure, machinery casing occupied the center of the cabin deck. Directly below this deck was the upper deck at 53' above the keel where the officers staterooms were located. The purser s office was in the middle passage, with access through the purser s stateroom. The upper deck was designed to hold the offices and staterooms for the engineers and mates, with the ship s office port and the chief engineer s office starboard. The rest of the crew was housed on the main deck in twenty-three double-occupancy staterooms with single rooms for the bosun and carpenter. The hospital and port officers quarters were in the aft midsection of the deck.
The second deck contained the galley and all food storage spaces, as well as separate mess rooms for the deck and engine crews and a crew recreation area. The crew s laundry and pantry were also on the second deck in the original plans. The spaces below the crew areas were designed to hold the ship s engine and machinery spaces, as well as the potable water tanks and fuel-oil settling tanks. The deck elevations were measured from the keel; the third deck was located above it and the tank top sat only above the keel. The second deck was above the keel, and the main deck sat at 4. Modifications: American President Lines contracted Todd Shipyards in to convert the ship to MARAD design a Master Mariner-class cargo vessel.
This required lengthening the hull by adding two holds, and converting the breakbulk holds to container holds. In American President Lines traded President Harrison to the Maritime Administration, and in MARAD activated the vessel and its sister ships for conversion to Auxiliary Crane Ships (designated T-ACS or MARAD design MA1qd). Bay Shipbuilding Corporation of Sturgeon Bay, Wisconsin, undertook the modifications. The kingpost-and-boom type gear was removed and replaced with three twin crane sets consisting of twin boom, pedestal mounted, rotating deck cranes on the starboard side. Alterations to the ballast configuration also had to be made to compensate for the new weight distribution.2 5.
Names: This ship was the third vessel named SS President Harrison under the ownership of American President Lines (its sister ships were President Polk and President Monroe). With the conversion to Auxiliary Crane Ship, the vessel was renamed SS Keystone State (its sister ships were also renamed as Gem State and Grand Canyon State).3 1 Office of Ship Construction, Maritime Administration, U.S. Department of Commerce, American President Lines, Single Screw Cargo Vessel, M.A. Design C4-S-1qa, MA Plan No. C4-S-1qa-S0-0-1, January 2 Department of the Navy, Naval Sea Systems Command, T-ACS 1 Class Mission Operations Handbook, unknown date, 3 T-ACS 1 Class Mission Operations Handbook, SS KEYSTONE STATE HAER No.
CA-2334 Page 6 Historical Context The United States military has long relied on civilian vessels to move equipment and personnel during wartime or in response to states of emergency. After World War II, the Maritime Commission, predecessor to the Maritime Administration, subsidized the construction of private commercial merchant vessels, provided they were fitted with certain National Defense Features that would not interfere with the commercial value of the vessels but would aid military operations when necessary.
Such features included the ability to maintain a 20-knot speed and be converted into a troop transport if necessary as well as the inclusion of cargo heavy-lift capacity.4 During the container ships became more commercially attractive, and construction of offloading facilities at ports started. This led to vessels designed to maximize space for containers by removing shipboard cargo lifting features. The shift to non-self-sustaining cargo vessels was not immediate, and many companies continued to integrate both breakbulk cargo and container holds into their ship designs.
The had seen the development of the Mariner-class ship, considered the most advanced ship design of the era, but with the rise of containerization, the new C6-type design was needed to accommodate containers while also retaining the national defense features required for MARAD-subsidized vessels. Mariner-class ships and the American President Lines President Harrison and its sister ships were originally built as combination breakbulk container ships for the American President Lines (APL), one of the oldest and largest merchant shipping companies in the United States.
The company was originally founded as the Pacific Mail Company in by William Henry Aspinwall, who won the first contract for a steam voyage between Panama and Oregon.5 Dollar Line purchased the company in and operated it until the Great Depression. The economic strain of the era combined with increased government shipping regulations and rising labor costs resulted in financial stress. The company s official history notes that in the Dollar Line Fleet was worth $11 million, but the company s liability was $17 million, and interest on the debt was accumulating at a rate of a month. The newly formed Maritime Commission judged the Dollar Line to be unsound. 6 The United States government subsequently took control of the company and renamed it American President Lines.
In California oil man Ralph K. Davies purchased APL for $18 million. The original Mariner class was the innovation of Vice Adm. Edward L. Cochrane, the former chief of the Navy Bureau of Ships during World War II. He came out of his post-war retirement to serve as Chairman of the Maritime Commission and later as Maritime Administrator to prevent the post-war collapse of all American shipbuilding activity. 7 Under his leadership, the 4 Charles B. Cherrix, Constantine Foltis, and Edward T. Cangin, Auxiliary Crane Ship SS Keystone State T-ACS 1, presented to the Chesapeake Section of the Society of Naval Architects and Marine Engineers, June 11, 5 Douglas Jackson, APL History, American President Lines, available at accessed July 10, 6 Jackson, 26. 7 R. P.
DuMont, The American President Lines Master Mariners SS PRESIDENT POLK, SS PRESIDENT MONROE, SS PRESIDENT HARRISON, Paper for Society of Naval Architects and Marine Engineers, Joint Northern and Southern California Meeting, Monterey, California, October 9, SS KEYSTONE STATE HAER No. CA-2334 Page 7 Mariner-class cargo ships were designed to be the largest and fastest cargo ships of the post-war world and were given the MARAD designation C4-S-1a. The vessels proved to be successful, and modifications were developed to further diversify their applicability. Each of the modifications to the C4-S-1a design retained the same basic hull and machinery and were thus differentiated only by the last letter. Thus, was the Navy s first attack cargo transport, USS Tulare (AKA-112).
The ships with the c designation (i.e., were APA troop transports while those with the e designation were updated basic Mariner-class vessels. American President Lines obtained eight Mariner-class vessels, the first four of which (Presidents Adams, Coolidge, Hayes, and Jackson) were converted for Round-the-World service by changes to their cargo gear, deep tanks, reefer spaces, and passenger quarters.
These were given the MARAD designation The second group of four obtained by American President Lines were Presidents Arthur, Buchanan, Garfield, and Taylor, which were converted at Todd-Alameda to and specially designed for Atlantic/Straits route service.8 American President Lines relied upon its experience with the Mariner class and contracted Bethlehem Steel in San Francisco to build two new Mariner-class vessels called the Sea Racers with a MARAD designation of These were purpose built to exclusively transport 20' x 8' x 8' containers and featured an added gantry crane fitted to hold 4 and cell guides for rapidly stowing and handling containers.
With a modified tubular network of boom supports for a modified Ebel rigging system and special equipment for handling containers, the was recognized as a highly advanced design that arrived well ahead of the global adoption of containerization. American President Lines decided to postpone further construction of container-only vessels in favor of a class of ships suited to transporting traditional breakbulk cargo and with suitable space for container transport. The resulting class was what the company referred to as the Master Mariners.
Built by National Steel and Shipbuilding Company of San Diego, the vessels were given the MARAD designation C4-S-1qa, reflecting their genesis in the earlier Sea Racers and Mariner-class vessels.9 The three Master Mariners Presidents Polk, Monroe, and Harrison were designed with both breakbulk dry and reefer cargo holds as well as holds to carry thirty-six containers below decks and forty-two containers on deck. In the breakbulk cargo vessel President Harrison was built with an initial length of The differences between the Mariner class and Master Mariner class were nuanced and focused largely on their cargo handling and storage capabilities.
The Master Mariners featured an extended foc s le deck to cover hold 2, which increased the cargo capacity and provided space for the natural expansion of cargo during transport. The winch house for hold 1 that was positioned on the main deck of the Mariner vessels was relocated to the foc s le deck on the Master Mariners, and each of the holds were provided with a centerline bulkhead for grain cargo. The dimensions of the hatches were altered to accommodate the holds, and the cargo-handling equipment was modified to handle containers and reefer cargo.10 8 DuMont. 9 DuMont. 10 DuMont. SS KEYSTONE STATE HAER No. CA-2334 Page 8 In additional modifications were made to President Harrison, including the lengthening of the hull by to increase cargo capacity.
The holds were also converted to cells to accommodate the rise in containerization. The work was completed at Todd Shipyards in Seattle, Washington. This resulted in a change in MARAD designation to Auxiliary crane ships were developed to meet the U.S. Navy s need for a class of vessels capable of loading and offloading cargo in forward deployment areas. In the Chief of Naval Operations authorized the acquisition of three former vessels from APL, then held in the National Defense Reserve Fleet in Suisun Bay, California.
The container ships were to be activated and converted to auxiliary crane ships in response to the urgent need to improve the nation s strategic sealift capability and had to be capable of loading and offloading non-self- sustaining containerships, in either unimproved ports or while anchored offshore. 12 The need for crane ships rose due to the shift from traditional breakbulk shipping to containerization starting in the Shipping companies began to realize that cargo could be loaded into standardized containers that could remain locked from the point of origin to the final destination, drastically reducing the number of hands needed to handle cargo during the shipping process as well as reducing the cost and frequency of injury to longshoremen.
Ships were soon designed with little or no cargo-handling gear to increase capacity for containers, requiring ports to have the necessary handling equipment. Though containerization proved immensely profitable to the merchant sector, non-self-sustaining containerships were of little use to the military, and the U.S. Navy sought alternatives for unloading containerships in underdeveloped or damaged ports.
The auxiliary crane ships (MARAD designation C6-S-MA1qd) were the result of studies to make cargo ships self-sustaining as well as parallel investigations into ways to make external container ship handling gear available anywhere on short notice.13 The first ships selected for conversion to auxiliary crane ships (T-ACS) were the three former American President Lines sister ships: President Harrison, President Polk, and President Monroe. When transferred to MARAD, President Harrison was renamed SS Keystone State. The key design features of the conversion to auxiliary crane ships were the removal of the original cargo gear and resister houses to clear the deck for the new cargo-handling system.
The new system included three new cargo cranes as well as modifications to the hatch covers and container cells that were in the way of the forward and midship cranes. Since the new cranes were all on the starboard side, a fixed ballast system had to be installed on the port side to provide stability during extreme cargo lifts. Diesel generators specifically designed to provide power to the new cargo-handling system also had to be installed. The conversion was completed in and the new SS Keystone State was delivered to the U.S. Navy on time and under budget at a total cost of million.14 11 DuMont, 12 T-ACS 1 Class Mission Operations Handbook, letter of promulgation. 13 Cherrix, et al. 14 Cherrix, et. al. SS KEYSTONE STATE HAER No. CA-2334 Page 9 B.
Operational History The launching ceremony for Keystone State occurred on October 2, and featured music by the U.S. Naval Training Center band and a solo performance of the National Anthem by the wife of George Killion. Bernice Layne Brown, wife of California Governor Edmund Brown, served as the sponsor, while John M. Murphy, vice president of sales for National Steel and Shipbuilding Company was the master of ceremonies.15 President Harrison operated under American Presidents through In April Daily Shipping News announced the ship would be completing its hundredth voyage on the company s route between Taiwan and Manila. The article went on to report, The PRESIDENT HARRISON has completed more voyages than any other ship in the company s current fleet of 22 vessels.
She has operated in APL s former Atlantic Straits and Round-the-World services, as well as on the extensive Pacific trade routes the company now services.16 In September Keystone State participated in a Joint Logistics Over the Shore (JLOTS) training exercise to demonstrate and test its capabilities as an auxiliary crane ship. JLOTS missions facilitated sealift procedures in forward operating regions with inadequate port facilities. The operations were designed to aid U.S. military and humanitarian missions around the world, and vessels like the T-ACS class were integral to those endeavors.17 SS Keystone State remains in the Ready Reserve Force in Alameda, California, and can be ready for service within five days. The RRF is a joint program of MARAD and the U.S.
Navy, designed to keep a select number of vessels from the National Defense Reserve fleet ready for activation for sealift operations within five to ten days as opposed to the rest of the which require up to four weeks.18