The Spanish Colonial Revival style maintenance shop originally housed vehicles for repair, and is characteristic of Caltrans maintenance station design. The maintenance shop is one of three buildings at the District 11 maintenance station in Old Town San Diego. There are four other maintenance stations in the state that were built in the Spanish Colonial Revival style in response to local climate and architectural styles. CALTRANS DISTRICT 11 MAINTENANCE STATION, VEHICLE MAINTENANCE BUILDING (Environmental Engineering and Permits Building) HABS No. CA-2730-A (Page 2) PART I. HISTORICAL INFORMATION A. Physical History: 1. Date of erection: 2. Architect: California Division of Architecture, Department of Public Works. 3. Original and subsequent owner/occupant: Caltrans 4.
Original and subsequent uses: Vehicle maintenance and offices. 5. Builder, Contractor, Suppliers: Labor from the California Division of Highways, Department of Public Works. 6. Original plans and construction: Vehicles originally accessed the maintenance shop through the sliding bay doors on the west side. Offices were located in the front of the building. Large windows along the east side lit the open interior. 7. Alterations and additions: Caltrans significantly altered the building after to create the Permits office. During this remodeling, Caltrans removed the driveway behind the building, and closed off the back area by a wall and landscaping. An exterior wall with windows replaced the original wooden sliding bay doors.
At the front of the building, a wide plain raised stucco surround replaced the original detailing around the windows. Small paired 12-light windows with a large raised- stucco arch replaced the original windows along the east side and replaced the original bay doors along the west side. The original windows on the rear were removed, and the exterior wall was filled in. The main building received a tile cornice at the top of the parapet wall during the remodeling. Caltrans created a fence wall from the front of the maintenance shop to Taylor Street. B. Historical Context: A full overview history of the site can be found in the narrative for HABS No. CA-2730. The following history focuses more closely on just the Vehicle Maintenance Building.
In the three buildings of the maintenance station were built to house vehicles for the Division of Highways, a branch of the future Department of Transportation. A Spanish Colonial style building was chosen for this maintenance station so the buildings would reflect the local building traditions and blend with the surrounding community. CALTRANS DISTRICT 11 MAINTENANCE STATION, VEHICLE MAINTENANCE BUILDING (Environmental Engineering and Permits Building) HABS No. CA-2730-A (Page 3) There are additional Spanish Colonial Revival style buildings built by Caltrans from The other maintenance stations built in this style were the facilities at Big Sycamore in Ventura County, Las Flores and Arroyo Seco in Los Angeles, and Serra in Orange County.
The building at Taylor Street served as a maintenance shop for the maintenance station until the early Transportation vehicles and equipment were repaired in the service bays. The remodeling in the added offices for the Environmental Engineering Department and the Permits office. Caltrans removed the large windows along the east side of the building and replaced them with smaller windows with a stucco arch surround. The department removed the sliding service doors along the west side of the building and closed in the bays. The building is scheduled for demolition in Caltrans is planning to build a new office complex on the site. PART II. ARCHITECTURAL INFORMATION A. General Statement: 1.
Architectural character: The building is a Spanish Colonial Revival style maintenance station, designed by the Division of Architecture, California Department of Public Works. The District 11 maintenance station is one of five stations that were built in this style for Caltrans. 2. Condition of fabric: Very good. B. Description of Exterior: 1. Overall dimensions: The rectangular building is twelve bays long with two rows of columns dividing the interior into three bays across the width. The front gable- roof section extends from the main section of the building, and is approximately two bays in length. The building is one story tall with an unfinished attic at the front. 2. Foundations: Poured concrete. 3.
Walls: Wooden diagonal sheathing covered in a textured stucco finishes the exterior walls. Square vents in a four-square pattern open on the south, east, and west sides. The nearly smooth stucco has been painted a tan color. 4. Structural systems, framing: The structural system is steel-frame post and beam. The wood-frame roof has a steel beam running down center, extending from the attic to the rear of the building. CALTRANS DISTRICT 11 MAINTENANCE STATION, VEHICLE MAINTENANCE BUILDING (Environmental Engineering and Permits Building) HABS No. CA-2730-A (Page 4) 5. Porches, stoops, balconies: There is a slight incline that leads to a concrete platform at the front, and a ramp leads to the doorway at the east side. 6. Openings: a.
Doorways and doors: The exterior doors have wide flat stucco trim surrounds. The main entrance, at the front, is a flush-metal door with one light. A similar door accesses the east side. Two flush metal doors with one light each access the west side. b. Windows and shutters: The metal-frame windows on the front are of various sizes with a wide stucco band trim. The windows along the west and east sides are paired 12-light metal-frame windows with hinged center lights. The window frame is a wide stucco band that extends in an arch above the window. Two windows at the west side of the front extension are 3-light casement windows flanking a 3-light fixed window, surrounded with a wide stucco trim. 7. Roof: a.
Shape, covering: The main section of the building has a slight gable roof covered with rolled composition roofing material. Parapet walls obscure the main roof from the ground level. There are four roof vents along the east side of the ridge line. The front extension is a double-gable roof covered in heavy red tiles. b. Cornice, eaves: The cornice is a row of decorative tiles, set along the top of the parapet walls. C. Description of Interior: 1. Floor plans: The front entrance leads into a large room at the front gable-roof section. This area leads to a second large room used for the Permits office. The Permit office leads to a corridor at two points, and several small offices open off the corridor. The center of the main section of the building is open, with columns spaced in a grid.
Small offices face off a corridor on the north end of the building. 2. Stairways: There is one unfinished stairway that leads to the attic at the south center of the building. CALTRANS DISTRICT 11 MAINTENANCE STATION, VEIDCLE MAINTENANCE BUILDING (Environmental Engineering and Permits Building) HABS No. CA-2730-A (Page 5) 3. Flooring: Carpet covers the floor in the main office area. The attic is unfinished wood, laid along the length of the building. 4. Wall and ceiling finish: Plasterboard covers the interior walls, and paneled wall partitions divide the offices. Acoustical ceiling tile hangs from the dropped ceiling. 5. Doorways and doors: There is one arched opening between the front gabled section and the rest of the building.
Most of the interior doors are flush metal, with one-light, or plain. D. Site: 1. General Setting and Orientation: Interstate 8 runs to the north of the site, raised and at a higher elevation. The building sits on the southeast section of the property, in between the Caltrans District 11 Vehicle Maintenance Building Taylor Street.) and the Maintenance Station Office Taylor Street). The front faces southeast onto Taylor Street. The length of the building runs from the northwest to the southeast. The Caltrans District 11 headquarters office building sits across Taylor Street, immediately opposite the site. Access to the site is by a vehicle entrance on Juan Street, or by a pedestrian access on Taylor Street. 2.
Historic landscape design: Caltrans removed the driveway to Juan Street at the back of building and closed off the area with a fence and wall. The remodeling in the early added a fence wall along the front of the building and a ramp along the east side. The site is used as a parking lot, and has lost the equipment associated with the maintenance yard. 3. Outbuildings: Caltrans built Taylor Street in as part of the maintenance station. It is a small cottage in the Spanish Colonial Revival Style, used for Caltrans offices. CALTRANS DISTRICT 11 MAINTENANCE STATION, VEHICLE MAINTENANCE BUILDING (Environmental Engineering and Permits Building) HABS No. CA-2730-A (Page 6) PART III. SOURCES OF INFORMATION A. Early Views: 1.
Photograph of old Caltrans District 11 headquarters building, taken at the dedication of the building in Like the maintenance station, the building-is in the Spanish Colonial Revival style, and predates the station by three years. No. the Caltrans Headquarters Library. 2. Aerial photograph of Old Town from Presidio Hill, taken 15 October The view shows the east side and roof before remodeling. The large windows that were along the east side are visible. No. 80: the San Diego Historical Society. 3. Aerial photograph of Old Town, taken in The front and west side of the building are visible, showing the original sliding bay doors along the west side before the remodeling. No. the San Diego Historical Society. 4.
Aerial photograph of Old Town, taken in The rear and roof of the building are visible, showing the original windows along the rear. N. the San Diego Historical Society. B.