BlockBefore

Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. 57.3X, Between Cajon Summit and Keenbrook, Devore

Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. 57.3X, Between Cajon Summit and Keenbrook, Devore, San Bernardino County, CA. Surveyed as HAER CA-2259-A, with a 792-word written history.

From the record

“The section of railroad through Cajon Pass provided a vital link between the greater Los Angeles area and distant markets.”

Written record, HAER CA-2259-A survey. Machine-read text.

Surveyed by the federal HAER program as HAER CA-2259-A · the record runs 792 words · one of 145 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Location

106 words

Source document Quoted word for word from HAER CA-2259-A. Not written, edited or summarised by this site.

Railway Company Railroad Structure No. a reinforced- concrete arch culvert, is located at Milepost on Main Track 1, Devore vicinity, San Bernardino County, California. The culvert is bounded by the Union Pacific Railroad to the north and Main Track 2 to the south. The culvert lies within the SW% of the NW 1.4 of the NE% of Section 19, Town- ship 3 North, Range 5 West, on the Cajon, California (photorevised 7.5-minute U.S. Geological Survey quadrangle. Universal Transverse Mercator Coordinates: Zone 11, NAD83, Geodetic Reference System ellipsoid, mN mE (inlet); mN mE (outlet). Date of Construction: Architect/Engineer: unknown Builder: Atchison, Topeka and Santa Fe Railway (AT&SF)

Significance

607 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CA-2259-A. Not written, edited or summarised by this site.

The section of railroad through Cajon Pass provided a vital link between the greater Los Angeles area and distant markets. In the California State His- toric Preservation Office determined the historic route of the AT&SF (now railroad alignment through Cajon Pass to be eligible for listing in the National Register of Historic Places under Criteria a and c. By connecting Los Angeles and San Bernardino to markets throughout the United States, the railroad dramatically affected demographic, commercial, and cultural trends in southern California. Furthermore, construction of the long, winding alignment through rugged and often steep terrain represents a significant engineering feat for its time. Structure No.

contributes to the function and significance of the railroad line by mitigating the effects of erosion on the integrity of the system. Report Prepared By: Scott Thompson, Senior Historian John Goodman, Archaeologist Statistical Research, Inc. Tucson, Arizona Date: March Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. 57 .3X HAER No. CA-2259-A (page 2)

Architectural and Engineering Information

Structure No. 57 .3X is a reinforced-concrete arch culvert located northwest of the old Summit Station (Figure 1). A culvert is a structure designed to protect the roadbed from the erosive effects of storm runoff by carrying water safely under the track. Culverts are placed at points along the roadbed where the rail- road intersects normally dry channels. The size of a culvert is determined by the anticipated rate of flow during periods of heavy rainfall (Hay Webb Concrete arch culverts are usually found on major drainages under high embankments. The structure consists of an inlet transition on the north side of the roadbed embankment that diverts and channels water under the track through an arched opening.

Both the inlet and outlet transitions of this re- inforced-concrete arch culvert have headwalls, wing walls, and aprons. The headwalls and wing walls hold back the roadbed fill from the culvert openings, and the aprons prevent scouring around the inlet and outlet. Each arched opening has a height of and bottom width of The distance from the floor to the top of the headwall is 11 Inside the culvert, the concrete floor extends about with a slight downward slope that corresponds to the slope of the channel it drains.

The overall length of the culvert, from inlet transition to outlet transition, is approximately The headwalls measure 11 across the top and have a width of On the upstream side of the structure, above the headwall, are two horizontally placed timber beams, one above the other, that serve as a retaining wall. Two angle iron brackets secure the timbers to the headwall. The wing walls, which have a width of are flared. They begin 16" be- low the top of the headwall and taper down The wing walls on the downstream side of the culvert are essentially the same, in terms of design and dimensions, although extensions of were attached to the primary wings. All of the edges of this structure are beveled with a width of 3". II. REFERENCES CITED Hay, William W. Railroad Engineering, Volume One.

John Wiley & Sons, New York, and Chapman and Hall, London Webb, Walter L. Railroad Construction: Theory and Practice. 9th ed. John Wiley and Sons, New York. Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. HAER No. CA-2259-A (page 3) Structure Scale (inset 1 Universal Transverse Mercator coordinate system Pro1ectton Transverse Mercator Datum. North American Datum Zone 11 N Elhpso1d: Geodetic Reference System Umt meter Archaeolog1cal data: SRI field data Base data Cajon, California 7 S mmute USGS topographic quadrangle Stat1sbcal Research, Inc., December Figure 1. Project location Cajon, California, 7.5-minute U.S. Geological Survey quadrangle [photorevised

In context

Devore, California The place record: every map, photograph and survey of this town.
San Bernardino County, California 963 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Devore

22 records

The federal surveyors worked through Devore building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
Burlington Northern Santa Fe RailroadHAER CA-22595,098 words
Burlington Northern Santa Fe RailroadHAER CA-2259-K1,153 words
Burlington Northern Santa Fe RailroadHAER CA-2259-O1,031 words
Burlington Northern Santa Fe RailroadHAER CA-2259-E937 words
Burlington Northern Santa Fe RailroadHAER CA-2259-C905 words
Burlington Northern Santa Fe RailroadHAER CA-2259-N904 words
Burlington Northern Santa Fe RailroadHAER CA-2259-H903 words
Burlington Northern Santa Fe RailroadHAER CA-2259-T888 words
Burlington Northern Santa Fe RailroadHAER CA-2259-R864 words
Burlington Northern Santa Fe RailroadHAER CA-2259-L862 words
Burlington Northern Santa Fe RailroadHAER CA-2259-D855 words
Burlington Northern Santa Fe RailroadHAER CA-2259-S847 words
Burlington Northern Santa Fe RailroadHAER CA-2259-G835 words
Burlington Northern Santa Fe RailroadHAER CA-2259-M835 words
Burlington Northern Santa Fe RailroadHAER CA-2259-Q833 words
Burlington Northern Santa Fe RailroadHAER CA-2259-V817 words
Burlington Northern Santa Fe RailroadHAER CA-2259-B809 words
Burlington Northern Santa Fe RailroadHAER CA-2259-I809 words
Burlington Northern Santa Fe RailroadHAER CA-2259-J793 words
Burlington Northern Santa Fe RailroadHAER CA-2259-U769 words
Burlington Northern Santa Fe RailroadHAER CA-2259-P748 words
Burlington Northern Santa Fe RailroadHAER CA-2259-F730 words

Provenance

  • Written history. Quoted verbatim from HAER CA-2259-A. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.