The section of railroad through Cajon Pass provided a vital link between the greater Los Angeles area and distant markets. In the California State His- toric Preservation Office determined the historic route of the AT &SF (now railroad alignment through Cajon Pass to be eligible for listing in the National Register of Historic Places under Criteria a and c. By connecting Los Angeles and San Bernardino to markets throughout the United States, the railroad dramatically affected demographic, commercial, and cultural trends in Southern California. Furthermore, construction of the long, winding alignment through rugged and often steep terrain represents a significant engineering feat for its time. Structure No.
contributes to the function and significance of the railroad line by carrying rail traffic across a drainage channel. Report Prepared by: Scott Thompson, Senior Historian John Goodman, Archaeologist Statistical Research, Inc. Tucson, Arizona Date: March Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. HAER No. CA-2259-T (page 2) Architectural and Engineering Information Structure No. is a T-rail-slab-on-concrete bridge that carries Main Tracks 1 and 2 over a relatively large drainage originating on Lower Lytle Creek Ridge to the west (Figure 1). This bridge was originally constructed in it was widened in to accommodate the second track and modified in fol- lowing major flooding along Cajon Creek and its tributaries.
The widening and modification episodes are evident in the attributes of the abutment interiors, as discussed below. The bridge consists of a -long reinforced-concrete slab (span), two reinforced-concrete abutments, a reinforced-concrete pier at the cen- ter of the span for additional support, a poured-concrete floor with apron, and a timber ballast deck that supports the ballast, ties, and rails. Running rails were used to reinforce the concrete slab that forms the span, hence the term "T-rail slab" (Bridge List, First District, Los Angeles Division, p. 50, Structures De- partment, Railway Company, Kansas City, Kansas; Howard Perry, personal communication This bridge has an overall length of and a width of the distance from the top of the abut- ments to the floor is approximately 8'.
On the abutment faces, beginning at the upstream side of the bridge, are form-board impressions that continue for a distance of approximately The abutment faces are finished with no form-board impressions for the final 16' toward the downstream side of the structure. These finished portions of the abutments represent the building episode, whereas the portions with form-board impressions represent the bridge's widening in and subsequent repairs following the flood. Flared and downward-sloping wing walls extend from the bridge abutments on the upstream side. The wing walls have a maximum height of a minimum height of a width of and edges with a 2" bevel. The center pier is high and wedge-shaped on the upstream side to facilitate water flow.
On either side of the pier, the concrete floor is slightly concave. The pier and abutments sup- port the concrete-slab span. A date of is stamped in the center of the span. The apron is obscured by sand and debris, but it probably extends to the end of the wing walls. Two timber beams, positioned hori- zontally on top of the span, retain ballast. The downstream side of the bridge is considerably different from the upstream side. The angled wing walls begin at the top of the concrete-slab span, and the upper portions of the wings have a gradual slop- ing curve. The wing walls have a width of and extend for a distance of about 8' before they are ob- scured by fill from the roadbed embankment.
On this side of the bridge the pier end is flat, with a height of and a width of Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. HAER No. CA-2259-T (page 3) Structure "' "" .:>~"-,A Scale: (inset 1: Universal Transverse Mercator coordinate system ~ ;'f,/,i,:':'.-f Projection: Transverse Mercator Datum: North American Datum Zone 11 N Ellipsoid: Geodetic Reference System Unit:meter N Archaeological data: SRI field data Grid Base data: Cajon and Devore, California 7.5-minute USGS topographic quadrangles Statistical Research, Inc., December Figure 1. Project location Devore, California, 7.5-minute U.S. Geological Survey quadrangle [photorevised