Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. 65.6, between Cajon Summit and Keenbrook, Devore
Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. 65.6, between Cajon Summit and Keenbrook, Devore, San Bernardino County, CA. Surveyed as HAER CA-2259-O, with a 1,031-word written history.
From the record
“The section of railroad through Cajon Pass provided a vital link between the greater Los Angeles area and distant markets.”
Written record, HAER CA-2259-O survey. Machine-read text.
Surveyed by the federal HAER program as HAER CA-2259-O · the record runs 1031 words · one of 145 surveyed structures published for this county.
Source document
Quoted word for word from HAER CA-2259-O.
Not written, edited or summarised by this site.
Railway Company Railroad Structure No. a reinforced- concrete box culvert, is located at Milepost on Main Tracks 1 and 2, Devore vicinity, San Bernardino County, California. The culvert is bounded by the Union Pacific Railroad to the west and Cajon Boulevard (historic U.S. Highway 66) to the east. The culvert lies within the NE lJi of the SE lJi of the NW lJi of Section 13, Town- ship 2 North, Range 6 West, on the Cajon, California (photorevised 7.5-rninute U.S. Geological Survey quadrangle. Universal Transverse Mercator Coordinates: Zone 11, NAD83, Geodetic Reference System mN mE (inlet); mN mE (outlet). Date of Construction: Architect/Engineer: unknown Builder: Atchison, Topeka and Santa Fe Railway (AT&SF)
Significance
838 words
The headings the report itself prints. Each one jumps to where it begins.
Source document
Quoted word for word from HAER CA-2259-O.
Not written, edited or summarised by this site.
The section of railroad through Cajon Pass provided a vital link between the greater Los Angeles area and distant markets. In the California State His- toric Preservation Office determined the historic route of the AT&SF (now railroad alignment through Cajon Pass to be eligible for listing in the National Register of Historic Places under Criteria a and c. By connecting Los Angeles and San Bernardino to markets throughout the United States, the railroad dramatically affected demographic, commercial and cultural trends in Southern California. Furthermore, construction of the long, winding alignment through rugged and often steep terrain represents a significant engineering feat for its time. Structure No.
contributes to the function and significance of the railroad line by mitigating the effects of erosion on the integrity of the system. Report Prepared by: Scott Thompson, Senior Historian John Goodman, Archaeologist Statistical Research, Inc. Tucson, Arizona Date: March Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. HAER No. CA-2259-0 (page 2)
Architectural and Engineering Information
Structure No. is a reinforced-concrete box culvert that borders the west bank of Cajon Creek but does not appear to be located on a primary drainage (Figure 1). Although most culverts are designed to protect the roadbed from the erosive effects of storm runoff-by carrying water safely under the track- others are constructed as underpasses for livestock, pedestrians, and wheeled vehicles (Hay Webb This culvert, which dates to was constructed as a vehicle underpass, as its location corresponds to an unimproved road depicted on the Cajon, California, 7.5-minute U.S. Geological Survey quadrangle. Furthermore, the distance from the floor to the top of the culvert-14'- 0"-is stenciled on the east and west headwalls, indicating the overhead clearance for vehicles passing under the tracks.
Historical accounts indicate that, in the early motorists traveling between San Bernardino and Victorville north on Legislative Route No. 31, Section B (later U.S. Highway could take a road that crossed Cajon Creek and the railroad tracks and intersected with Lone Pine Canyon Road (Hockaday and Hockaday Following the construction of the box culvert in motorists us- ing this thoroughfare drove under the tracks. Years of seasonal flooding has scoured the area around the east culvert opening, obliterating any traces of the former road. This 44'-0"-long culvert was constructed in following severe flooding that washed out or damaged large sections of track.
It is rectangular in cross section, with a width of and a height of Both the east and west ends of this cast-in-place concrete structure have headwalls, wing walls, and aprons. The headwalls and wings hold back the roadbed fill from the culvert openings, and the aprons serve as extensions of the culvert floor. The structure has a center height of from the concrete apron to the top of the headwall (Bridge List, First District, Los Angeles Division, p. 49, Structures De- partment, Railway Company, Kansas City, Kansas). The headwall on the west side of the structure is stamped with the date Two flared wing walls extend from the headwall. Each wing has a length of a width of and a maximum height of The apron extends as far as the wings and is almost completely obscured by sediments and gravel.
Directly above the headwall are three horizontally placed timber beams that serve as a retaining wall. The beams measure 7" x 16" x and are anchored to the headwall by four metal braces and partially supported by several additional metal posts on either side of the headwall. The east side of the culvert is similar in construction to the head end and also has the date stamped into the headwall. However, unlike the head end, the apron is not obscured by sediments and gravel, and it was possible to determine that the apron has a thickness of The width of the apron on the east side is Riprap consisting of large and moderate-size boulders cover the east side of the roadbed embankment.
Two crude post-and-rail fences, constructed from running rails, line either side of the culvert opening to prevent the riprap from obstructing it. At the edge of Cajon Creek, the fences abruptly change direction and travel along the bank of the creek bed. Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. HAER No. CA-2259-0 (page 3) II. REFERENCES CITED Hay, William W. Railroad Engineering, Volume One. John Wiley & Sons, New York, and Chapman and Hall, London. Hockaday, John, and Sandy Hockaday From Indian Footpath to Modern Highway. Trails and Tales of the Cajon Pass Series. Buckthorn, Etiwanda, California. Webb, Walter L. Railroad Construction: Theory and Practice. 9th ed. John Wiley and Sons, New York.
Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. HAER No. CA-2259-0 (page 4) Structure Scale: (inset Universal Transverse Mercator coordinate system Projection: Transverse Mercator Ai Datum: North American Datum Zone 11 N Ellipsoid: Geodetic Reference System Unit:meter N - Archaeological data: SRI field data Grid Base data: Cajon and Devore, California 7.5-minute USGS topographic quadrangles Statistical Research, Inc., December Figure 1. Project location Cajon, California, 7.5-minute U.S. Geological Survey quadrangle [photorevised
The federal surveyors worked through Devore building by building. These are the other structures
they measured and filed a report on, longest report first.
Written history. Quoted verbatim from HAER CA-2259-O. United States federal work, no copyright under 17 U.S.C. 105.
Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.