BlockBefore

Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. 61.3X, Between Cajon Summit and Keenbrook, Devore

Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. 61.3X, Between Cajon Summit and Keenbrook, Devore, San Bernardino County, CA. Surveyed as HAER CA-2259-H, with a 903-word written history.

From the record

“The section of railroad through Cajon Pass provided a vital link between the greater Los Angeles area and distant markets.”

Written record, HAER CA-2259-H survey. Machine-read text.

Surveyed by the federal HAER program as HAER CA-2259-H · the record runs 903 words · one of 145 surveyed structures published for this county.

Sources: the survey record at the Library of Congress

Location

107 words

Source document Quoted word for word from HAER CA-2259-H. Not written, edited or summarised by this site.

Railway Railroad Structure No. a reinforced-concrete-arch and corrugated-metal-pipe culvert, is located at Milepost on Main Track 1, Devore vicinity, San Bernardino County, California. The culvert is bounded by the Union Pacific Railroad to the west and Interstate 15 to the east. The culvert lies within the SE 1A of the SW 1A of the NE 1A of Section 27, Town- ship 3 North, Range 6 West, on the Cajon, California (photorevised 7.5-minute U.S. Geological Survey quadrangle. Universal Transverse Mercator Coordinates: Zone 11, NAD83, Geodetic Reference System ellipsoid, mN mE (inlet); mN mE (outlet). Date of Construction: modified Architect/Engineer: unknown Builder: Atchison, Topeka and Santa Fe Railway (AT&SF)

Significance

717 words

The headings the report itself prints. Each one jumps to where it begins.

Source document Quoted word for word from HAER CA-2259-H. Not written, edited or summarised by this site.

The section of railroad through Cajon Pass provided a vital link between the greater Los Angeles area and distant markets. In the California State His- toric Preservation Office determined the historic route of the AT&SF (now railroad alignment through Cajon Pass to be eligible for listing in the National Register of Historic Places under Criteria a and c. By connecting Los Angeles and San Bernardino to markets throughout the United States, the railroad dramatically affected demographic, commercial, and cultural trends in southern California. Furthermore, construction of the long, winding alignment through rugged and often steep terrain represents a significant engineering feat for its time. Structure No.

contributes to the function and significance of the railroad line by mitigating the effects of erosion on the integrity of the system. Report Prepared By: Scott Thompson, Senior Historian John Goodman, Archaeologist Statistical Research, Inc. Tucson, Arizona Date: March Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. HAER No. CA-2259-H (page 2)

Architectural and Engineering Information

Located on a major drainage, Structure No. is a combined reinforced-concrete-arch and corrugated- metal-pipe culvert (Figure 1). A culvert is a structure designed to protect the roadbed from the erosive ef- fects of storm runoff by carrying water safely under the track. Culverts are placed at points along the roadbed where the railroad intersects normally dry channels. The size of a culvert is determined by the anticipated rate of flow during periods of heavy rainfall (Hay Webb The arch culvert was constructed in The length of the culvert barrel is with an approximate overall length (from inlet transition to outlet transition) of (Second Track Summit to Cajon, 18' x 9'- 6" Arch, Station C. E. C. L. No. drawing, Structures Department, Railway Company Kansas City, Kansas).

On the downstream side of the culvert, the outlet transition consists of an arched opening, headwall, wing walls, and apron. The headwall and wing walls hold back the roadbed fill from the culvert opening, and the apron prevents scouring around the outlet. The arched opening has a center height of and bottom width of Inside the barrel of the arch culvert is a poured-concrete floor covered with a thin layer of sediment. At the arched opening, the distance from the floor to the top of the headwall is 21 The headwall has a length of 21 and a width of Two wing walls extend from the headwall.

Each wing has a length of25'-3", a width of 2'- 0", and is tapered, with a maximum height of and a minimum height of The north- ernmost wing wall is perpendicular to the headwall, and the southernmost wing wall flares away from the headwall at a wide angle. The edge of the concrete apron, at the point where the structure transitions to the natural drainage, is wide. In Atchison, Topeka and Santa Fe Railway extended the culvert on the upstream side of Main Track 1 during construction of a maintenance road embankment. The extension consists of an oval- shaped corrugated-metal pipe with an opening that measures x Fill from the roadbed embank- ment surrounds the pipe on the upstream side of the culvert.

The pipe extends about 30' into the arch culvert and is held in place by compacted sediment and gravel that surround the length of the pipe. This pipe likely had a diameter of but has been slightly compressed by the fill used to hold it in place. The length of the modified culvert is approximately (Bridge List, First District, Los Angeles Divi- sion, p. 46, Structures Department, The inlet transition of the original culvert-consisting of the headwall, wing walls, apron, and arch opening-is covered by the maintenance road embankment. II. REFERENCES CITED Hay, William W. Railroad Engineering, Volume One. John Wiley & Sons, New York, and Chapman and Hall, London. Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. HAER No. CA-2259-H (page 3) Webb, Walter L.

Railroad Construction: Theory and Practice. 9th ed. John Wiley and Sons, New York. Burlington Northern Santa Fe Railroad, Cajon Subdivision, Structure No. HAER No. CA-2259-H (page 4) Structure Scale 1 (inset 1 Universal Transverse Mercator coorchnate system Pro1ect1on. Transverse Mercator Datum North Amencan Datum Zone 11 N Ellipsoid Geodetic Reference System Unit meter Archaeological data. SRI field data Figure 1. Project location Cajon, California, 7.5-minute U.S. Geological Survey quadrangle [photorevised

In context

Devore, California The place record: every map, photograph and survey of this town.
San Bernardino County, California 963 topographic sheets across the county.
Library of Congress record The original filed report as the survey filed it.

Also surveyed in Devore

22 records

The federal surveyors worked through Devore building by building. These are the other structures they measured and filed a report on, longest report first.

SheetStructure SurveyReport
Burlington Northern Santa Fe RailroadHAER CA-22595,098 words
Burlington Northern Santa Fe RailroadHAER CA-2259-K1,153 words
Burlington Northern Santa Fe RailroadHAER CA-2259-O1,031 words
Burlington Northern Santa Fe RailroadHAER CA-2259-E937 words
Burlington Northern Santa Fe RailroadHAER CA-2259-C905 words
Burlington Northern Santa Fe RailroadHAER CA-2259-N904 words
Burlington Northern Santa Fe RailroadHAER CA-2259-T888 words
Burlington Northern Santa Fe RailroadHAER CA-2259-R864 words
Burlington Northern Santa Fe RailroadHAER CA-2259-L862 words
Burlington Northern Santa Fe RailroadHAER CA-2259-D855 words
Burlington Northern Santa Fe RailroadHAER CA-2259-S847 words
Burlington Northern Santa Fe RailroadHAER CA-2259-G835 words
Burlington Northern Santa Fe RailroadHAER CA-2259-M835 words
Burlington Northern Santa Fe RailroadHAER CA-2259-Q833 words
Burlington Northern Santa Fe RailroadHAER CA-2259-V817 words
Burlington Northern Santa Fe RailroadHAER CA-2259-B809 words
Burlington Northern Santa Fe RailroadHAER CA-2259-I809 words
Burlington Northern Santa Fe RailroadHAER CA-2259-J793 words
Burlington Northern Santa Fe RailroadHAER CA-2259-A792 words
Burlington Northern Santa Fe RailroadHAER CA-2259-U769 words
Burlington Northern Santa Fe RailroadHAER CA-2259-P748 words
Burlington Northern Santa Fe RailroadHAER CA-2259-F730 words

Provenance

  • Written history. Quoted verbatim from HAER CA-2259-H. United States federal work, no copyright under 17 U.S.C. 105.
  • Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
  • How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.