Burlington Northern Santa Fe Railroad, Cajon Subdivision, Tunnel No. 2, Between Cajon Summit and Keenbrook, Devore
Burlington Northern Santa Fe Railroad, Cajon Subdivision, Tunnel No. 2, Between Cajon Summit and Keenbrook, Devore, San Bernardino County, CA. Surveyed as HAER CA-2259-E, with a 937-word written history.
From the record
“The section of railroad through Cajon Pass provided a vital link between the greater Los Angeles area and distant markets.”
Written record, HAER CA-2259-E survey. Machine-read text.
Surveyed by the federal HAER program as HAER CA-2259-E · the record runs 937 words · one of 145 surveyed structures published for this county.
Source document
Quoted word for word from HAER CA-2259-E.
Not written, edited or summarised by this site.
Railway Company Railroad Tunnel No. 2 is located on Main Track 1, Devore vicinity, San Bernardino County, California. The tunnel is bounded by the Union Pacific Railroad to the north and the Main Track 2 to the south. The reinforced-concrete tunnel lies within the NE 1A of the NW 1A of the SE 1A of Section 23, Township 3 North, Range 6 West, on the Cajon, California (photorevised 7.5-minute U.S. Geological Survey quadrangle. Universal Transverse Mercator Coordinates: Zone 11, NAD83, Geodetic Reference System ellipsoid, mN mE (west portal); mN mE (east portal). Date of Construction: Architect/Engineer: unknown Builder: Atchison, Topeka and Santa Fe Railway (AT&SF)
Significance
752 words
The headings the report itself prints. Each one jumps to where it begins.
Source document
Quoted word for word from HAER CA-2259-E.
Not written, edited or summarised by this site.
The section of railroad through Cajon Pass provided a vital link between the greater Los Angeles area and distant markets. In the California State His- toric Preservation Office determined the historic route of the AT&SF (now railroad alignment through Cajon Pass to be eligible for listing in the National Register of Historic Places under Criteria a and c. By connecting Los Angeles and San Bernardino to markets throughout the United States, the railroad dramatically affected demographic, commercial, and cultural trends in southern California. Furthermore, construction of the long, winding alignment through rugged and often steep terrain represents a significant engineering feat for its time. Tunnel No.
2 contributes to the function and significance of the railroad line by providing a passage under higher ground in the rugged pass. Report Prepared by: Scott Thompson, Senior Historian John Goodman, Archaeologist Statistical Research, Inc. Tucson, Arizona Date: March Burlington Northern Santa Fe Railroad, Cajon Subdivision, Tunnel No. 2 HAER No. CA-2259-E (page 2)
Architectural and Engineering Information
Tunnel No. 2 is located at Milepost west of Tunnel No. 1 and aboutl/2 mile east of the now- abandoned Alray Station (Figure 1). This area has been subjected to considerable geological activities and has many steep hills and ravines. Instead of cutting down the tops of the hills to maintain the grade-as was done to the east and west-the tunnel was built through one of the largest hills in this area. The hills are composed mostly of uplifted sand and rock layers, and, therefore, excavating through these hills was relatively easy for the railroad crews compared to excavating through solid rock. Tunnel No. 2 is long. As originally constructed, the tunnel had a timber lining, framed as an arch, and reinforced-concrete headwalls at the portals.
However, repeated fires caused by embers from passing locomotives prompted Atchison, Topeka and Santa Fe Railway (AT&SF) to line the tunnel with concrete (Duke The date on which the tunnel was lined with concrete is not known. The reinforced- concrete lining varies in thickness, from l along the curve of the arch to at the base. The floor is poured concrete, reinforced by 61-pound standard rails spaced 30' center to center. Atop the concrete floor is the roadbed, which consists of ballast, ties, and rails. The height of the tunnel from the top of the rail to the arch centerline is and the width at the base is Following heavy rains in February the hillside above the tunnel's east portal washed away, inundating the tracks with mud.
To prevent future landslides from interfering with train operations, AT&SF extended the original 388'-0"-long tunnel by on the east end. Construction of the tunnel extension followed the same specifications as the original tunnel and was completed in (Cajon Tunnel No. 2, Sheet 2 of 2 Sheets, C.E.C.L.-191- drawing, Structures Department, Railway Company, Kansas City, Kansas; Walker The west portal of Tunnel No. 2 has a reinforced-concrete headwall that is part of the original construction. A date of is inscribed in the upper-central area of the headwall. The headwalls associated with the east and west portals are identical in terms of their design and dimensions.
Each headwall is approximately 31' high with a top width of Lateral buttresses are bonded to either side of the headwalls to provide support. The lateral buttresses taper toward the top, have a bottom width of and project outward from the headwall base for a distance of A date of is inscribed in the north buttress on the east portal. On the west side of the tunnel, dry-laid concrete block walls extend from the lateral buttresses on both sides of the track for a distance of approximately The walls, which are not part of the original con- struction, are three courses high and prevent soil from the hillsides from spilling onto the rails (David Miller, personal communication II. REFERENCES CITED Duke, Donald Chicago-Los Angeles-San Diego.
Santa Fe: The Railroad Gateway to the American West, vol. 1. Golden West Books, San Marino, California. Burlington Northern Santa Fe Railroad, Cajon Subdivision, Tunnel No. 2 HAER No. CA-2259-E (page 3) Walker, Chard L. Railroading through Cajon Pass. Prototype Modeler, Danvers, Massachusetts. Burlington Northern Santa Fe Railroad, Cajon Subdivision, Tunnel No. 2 HAER No. CA-2259-E (page 4) Scale: (inset Universal Transverse Mercator coordinate system Projection: Transverse Mercator Datum: North American Datum Zone 11 N Ellipsoid: Geodetic Reference System Unit:meter Archaeclogical data: SRI field data Base data: Cajon, California 7.5-minute USGS topographic quadrangle Figure 1. Project location Cajon, California, 7.5-minute U.S. Geological Survey quadrangle [photorevised
The federal surveyors worked through Devore building by building. These are the other structures
they measured and filed a report on, longest report first.
Written history. Quoted verbatim from HAER CA-2259-E. United States federal work, no copyright under 17 U.S.C. 105.
Text capture. Machine-read from the scanned typescript filed with the survey, so spelling and spacing follow the original page.
How this page is made. Documentary passages are quoted from the linked federal record; page labels and counts are clearly marked as site presentation or calculations.